AND-TFT-5PA-KIT PURDY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • Compatible with NTSC and PAL system
  • Pixel in stripe configuration
  • 5 inch (13 cm) diagonal screen
  • High brightness CCFL backlight (350 Nits)
  • Slim and compact
  • Vcom Toggle Imager Reversion: Up/Down and Left/Righ t 1/4 VGA resolution
  • High performance, low consumption RoHS compliant *ALSO AVAILABLE: AND-TFT-5PA-DHB (high bright backlight installed) Mechanical Characteristics Absolute Maximum Rating (GND = 0V, Ta = 25°C) Item Specification Unit Screen Size 5 inch (13 cm) diagonal Outline Dimensions 127.4 (H) x 92.8 (V) x 12.9 (D)(typ.) mm Active Area 102.72 (H) x 74.53 (V) mm Drive System a-Si TFT Active matrix, a line at a time Non-Interlace Drive Weight 160 ± 10 g Sub Pixel Arrangement stripe – Pixel Pitch 0.107 (H) x 0.319 (V) mm Display Format 960 x 234 dot Item Symbol Remarks Absolute Maximum Rating Unit Min. Max. Supply Voltage for Source Driver V CC -0.5 7 V V DD -0.5 7 Supply Voltage for Gate Driver V GH- V GL -0.3 40 VH Level V GH 04 0 L Level V GL -20 0 Analog Signal Input Level V V V B -0.3 7.0 V Digital Input Signals HSY , CSY, VSY, CKC -0.3 5.5 V Digital Output Signals HSY , VSY, PSI, PSC -0.3 5.5 V Storage Temperature -30 +80 °C Operation Temperature -20 +70 °C Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.

AND-TFT-5PA-KIT* Displays Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 05/13/03 Power Consumption (Ta = 25°C) Recommended Operating Conditions (Driving for TFT-LCD Panel) GND = OV, Ta = 25°C Optical Specifications (Ta = 25°C) Item Symbol Conditions Specifications UnitsMin. Typ. Max. Supply Current for Gate Driver Hi level I GH V GH = +17V 0.15 – 0.20 mA Low level I GL V GL = -15V -10.0 – -15.0 mA Supply Current for Source Driver I CC V CC = +5V 17.0 – 20.0 mA Supply Voltage for Controller I DD V DD = +5V 43.0 – 48.0 mA LCD Panel Power Consumption (Note 1) – – 0.45 – 0.57 W Backlight lamp Power Consumption (Note 2) – – 2.40 – 2.90 W Item Symbol Specifications UnitMin. Typ. Max. Supply Voltage for Source Driver Analog V CC 4.5 5.0 5.5 VLogic V DD 4.5 5.0 5.5 Supply Voltage for Gate Driver H Level V GH +15 +17 +19 V L Level V GL -16 -15 -14 Supply Voltage for Controller V DD 4.5 5.0 5.5 V R, G, B Signal Level Level – 0.3 – 4.8 V Digital Input Voltage H Level V IH 0.7 V DD – V DD VL Level V IL -0.3 – 0.3 V DD Digital Output Voltage H Level V OH 0.7 V DD – V DD VL Level V OL -0.3 – 0.3 V DD Note 1: The power consumption for backlight is not included Note 2: Backlight lamp power consumption is calculated by I L x V L

AND-TFT-5PA-KIT* Displays Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 05/13/03 Item Symbol Conditions Specifications UnitMin. Typ. Max. Viewing Angle Horizontal θ = 21, θ = 22 CR > 10 45 55 – degVertical θ = 11 30 35 – θ = 12 10 15 – Contrast Ratio (Note 1) CR θ = 0 80 150 – Response Time Rise Tr θ = 0 –1 5 3 0 msFall Tf – 30 50 Transmission Ratio T – 8.0 8.5 – % Uniformity U – 70 85 – % Luminance (Note 2) LUM θ = 0 350 400 – cd/m White Chromaticity x θ Lamp Life Time +25 °C – 10,000 – – hr Block Diagram Note 1: CR = Luminance when Testing point is White Luminance when Testing point is Black Contrast Ratio is measured in optimum common electrode voltage Note 2: Topcon BM-7(fast) luminance meter 2° field of view is used in the testing (after 20~30 minutes operation). Lamp Current 6mA

AND-TFT-5PA-KIT* Displays Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 05/13/03 Interface Pin Assignment Connector: Pin #. Symbol I/O Function Remark

1 HSY I/O Horizontal Sync Input/Output

2 FRP O Video Polarity Alternating Signal

3 CSY/HSY I Composite Sync/Horizontal Sync. Signal Note 1 4 V GH I Supply Voltage for Gate Driver (Hi Level) V GH TYP . = +17V 5 V GL I Supply Voltage for Gate Driver (Low Level) V GL TYP . = -15V 6 V B I Video Signal (Blue) 7 V R I Video Signal (Red) 8 V G I Video Signal (Green)

9 GND I Ground

I Supply Voltage for Controller V DD TYP . = +5V 11 V CC I Supply Voltage for Source Driver V CC TYP . = +5V

12 GND I Ground

13 CKC I Control Pin for Select I/O Signal Note 1

14 VSY

I/O Video Sync Input/Output

15 PSI O Synchronize Pulse for Decoder

16 PSC O Synchronize Pulse for DC-DC Converter

17 NC/VSY I No Connection/Vertical Sync. Signal Note 1

18 UD I UP/DOWN Control Note 2

19 RL I Right/Left Shift Control Note 2

20 NP I/O NTSC/PAL Selection Signal (Low: PAL, High: NTSC) If using auto detect this pin is output, otherwise input Recommended Operating Conditions (Driving for Backlight) Ta = 25°C Note 1: The wave form of lamp driving voltage should be as close to a perfect SIN wave as possible Note 2: This value is not output voltage of inverter. The voltage of inverter must be larger than the starting voltage. Item Symbol Remark Specifications UnitMin. Typ. Max. Lamp Voltage V L I L = 5 mA 432 480 528 Vrms Lamp Current I L – 4.5 5.0 5.5 mA Lamp Frequency P L Note 1 40 43 80 KHz Kick-Off Voltage (25 °C) V S Note 2 – – 600 Vrms Kick-Off Voltage (0 °C) V S – – 800 Vrms Note 1: This module can support 2 input mode. CKC of 13 pin select 2 input mode. Parameter Select pin (CKC) Description CKC (Pin 13) CSY/HSY (Pin 3) VSY (Pin 17) Composite sync mode* High CSY (positive edge) – Sync separate mode** Low HSY (positive edge) VSY (positive edge) Default mode of this module is composite sync mode (CKC=high) If using sync sep. mode (CKC=low), please contact Purdy to modify some components of PCBA Note 2

AND-TFT-5PA-KIT* Displays Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 05/13/03 Dimensional Outline General mechanical tolerance = 0.5mm