ANB1305 FENGJUI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR-RoHS Your Perfect Inductor Rev.0702 ANB1305 TYPE

  • FEATURE 1. High current capacity and Low DCR 2. High heat resistance, ideal for reflow soldering 3. High reliability
  • Applications 1. DC-DC converter 2. Set top box and Notebook and Server,etc
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification Dimension in m/m TYPE A B C D E F G I H Note1. Measurement frequency of Inductance value : at 100KHz, 0.1V Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. Isat: DC current at which the inductance drops 10%(typ) from its value without current Note4. Irms: Average current for 40℃ temperature rise from 25℃ ambient Note5. Inductance tolerance: M: ±20% Note6. Ordering Code: TYPE NAME: ANB1305 Main Inductance: 100 (10uH) T o l e r a n c e : M ( ± 2 0 % ) Note7.Packaging: Taping ; Quantity: 1000 Pieces/reel G I H 點 60 20 H EP OX Y White Mark i ng 100 epoxy

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR-RoHS Your Perfect Inductor Rev.0702 P/N L (µH) SRF (MHz) typ RDC (Ω)Max Isat (A) Irms (A) ANB1305-1R0M 1.0±20% 100 0.009 9.0 6.8 ANB1305-1R5M 1.5±20% 90 0.010 8.0 6.4 ANB1305-2R2M 2.2±20% 80 0.012 7.0 6.1 ANB1305-3R3M 3.3±20% 65 0.015 6.4 5.4 ANB1305-4R7M 4.7±20% 45 0.018 5.4 4.8 ANB1305-6R8M 6.8±20% 38 0.027 4.6 4.4 ANB1305-100M 10±20% 30 0.038 3.8 3.9 ANB1305-150M 15±20% 27 0.046 3.0 3.1 ANB1305-220M 22±20% 19 0.085 2.3 2.7 ANB1305-330M 33±20% 15 0.100 2.0 2.1 ANB1305-470M 47±20% 12 0.140 1.6 1.8 ANB1305-680M 68±20% 10 0.200 1.4 1.5 ANB1305-101M 100±20% 9 0.280 1.2 1.3 ANB1305-151M 150±20% 6 0.400 1.0 1.0 ANB1305-221M 220±20% 5 0.610 0.8 0.8 ANB1305-331M 330±20% 4.5 1.020 0.6 0.6 ANB1305-471M 470±20% 3.5 1.270 0.5 0.5 ANB1305-681M 680±20% 2.5 2.020 0.4 0.4 ANB1305-102M 1000±20% 2.0 3.00 0.30 0.30 ANB1305-152M 1500±20% 1.7 4.49 0.29 0.27 ANB1305-332M 3300±20% 1.1 8.97 0.19 0.17

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR-RoHS Your Perfect Inductor Rev.0702 GENERAL CHARACTERISTICS 1. Operating temperature range: -40 TO + 105 (I ncludes temperature when the coil is heated)℃ 2. External appearance: On visual inspection, the coil has external defects. 3. Terminal strength: After soldering. Between copper pl ate and terminals of coil. Push in two directions of X.Ywithstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec. 4. Insulating resistance: Over 100M Ω at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdow n at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: I nductance coefficient (0~2,000)x10-6/ (℃ -25~+80 ).℃ 7. Humidity characteristics(Moisture Resistance): Indu ctance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2 and 1 hour drying under normal condition.℃ 8. Vibration resistance: Inductance deviation within ±5%, af ter vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5 %, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260 , 10 seconds(See attached recommend reflow)℃ 11. Storage environment: Storage condition: Temper ature Range: 10 ~ 35 (Generally: 21 ~ 31 ) , ℃℃ ℃℃ Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) ; Transportation condition: Temperature Range: -35 ~ 85 , Humidity Range: 50% ~ 95% RH℃℃ 12. Use components within 6 months. If 6 months or more have elapsed, check soldarability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245℃ Peak 230℃ 170±10℃,60-120S 300 250 200 150 100 T(℃) T(s) 300240180120600 Lead-free the recommended reflow condition