AN820001

AN8 ZFSWITCHES | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

.cherryswitches.com Page 1 of 2, last update 2014-10-29, Specifications subject to change without notice. Angle Posi tion Sensors A N8 Sensors Programmab le, non-contact magnetic position sensors capable of continuous rotation Descript ion The AN8 Series sensors are non-contact, intrinsically linear contact angle position sensors. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft. Features Ty pical Applications  Angul ar position sensor with high tolerance for misalignment  Non-contact angular position sensing and full 360° rotation  Custom programming available for: angle range, slope, PWM output, custom magnets – contact factory  No mechanical interface means no parts to wear out or jam  Available with Delphi connector or 12” (305 mm) wire leads  RoHS compliant  IP67  Maximum air gap of 5.5 mm (0.22”)*  Implement (fork lift, agricultural trailer hitch, etc.) position sensing  Steer, throttle by wire  Gear selection  Zero-contact encoder alternative  Replacement for smart bearings  Outboard trim sensing Env ironmental Specifications Vibrat ion 6g sinuso idal, 8 g RMS axial; 40Hz – 2 kHz all 3 axes Operati ng Temperature -40 °C to 125 °C (-40 °F to 25 7 °F) with Delphi connectors, -40 °C to 150 °C (-40 °F to 302 °F) with wire leads Storag e Temperature -40 °C to 150 °C (-40 °F to 30 2 °F) Ingress Protection IP67 Electrical Specifications Inpu t Voltage 5.0 VDC ± 1 Output Voltage 10% to 90% of input (see graph for voltage vs. rotation angle characteristics) Inpu t Current 14 m A typ., 16 mA max. Output Current -8 mA to 8 mA Output Accuarcy ±3.5% Output Linearity ±3.5% M aximum Overvoltage 16 VDC Abso lute Max. Output Current ±30 m A Output Type Analo g (PWM available) Mechanica l Specifications Housing Material Glass Reinforced Plastic M echanical Travel 0° to 360° (continuous) M ating Connector Delph i Metri-pak 150.2 12162185; Terminal 1214075 / 2047680 M aximum Air Gap* *with AS500106 magnet carrier 5.5 mm (0.22") M aximum Center-To-Center Offset 2 mm radial (magnet to center)

www.cherryswitches.com Page of , l ast update 2014 , S pecification s subject to change without notice *Not commonly stocked Sensor Output Products Part N umber (Sensor) Sensor (incl. AS500106 m agnet) Sensing Range Wires Connectors Terminals AN820001 CU103601 180 N/A Packard Metri pack AN820002 CU103602 360 N/A Packard Metri pack AN820003* CU103603 N/A Packard Metri pack AN820031 180

18 AWG x 305 mm (12")

AN820033* These charts show the output voltage as a percentage of the input voltage for a given angle of rotation. Example: 180 sensing range, magnet rotated 135 , output voltage will be 70% of input voltage (see dashed lines in graph above). Dimensions mm (inches)