64K121-K20S3 ROSENBERGER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
4.3-10 Calibration Adaptor Jack/Jack 64K121-K20S3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RF_35/09.14/6.2 All dimensions are in mm; tolerances according to ISO 2768 m-H Interface According to IEC 61169-54 Documents Material and plating Connector parts Material Plating Center conductor CuBe Gold, min. 1.27 µm, over nic kel Outer conductor CuBe Silver, 3-6 µm Body Stainless steel Passivated Dielectric PTFE
4.3-10 Calibration Adaptor Jack/Jack 64K121-K20S3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RF_35/09.14/6.2 Electrical data Frequency range DC to 6 GHz Return loss ≥ 36 dB, DC to 4 GHz ≥ 28 dB, 4 GHz to 6 GHz Mechanical data Mating cycles ≥ 100 Maximum torque 5 Nm Recommended torque 2 Nm Gauge 3.10 mm to 3.25 mm General standard definitions For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour of this calibration standard. The different models, units, and terms used will depend on the VNA type and they will have to be entered into the VNA. All values are based on typical geometry and plating. Offset Z o / Impedance / Z o 50 Ω Offset Delay 189,466 ps Length (electrical) / Offset Length 56,80 mm Offset Loss 2.50 G Ω/s Loss 0,0411 dB / GHz Environmental data Operating temperature range 1 + 20 °C to +26 °C Rated temperature range of use 2 0 °C to +50 °C Storage temperature range - 40 °C to +85 °C RoHS compliant 1 Temperature range over which these specification are valid. 2 This range is underneath and above the operating temperature range, within the calibration adaptor is fully functional and could be used without damage.
4.3-10 Calibration Adaptor Jack/Jack 64K121-K20S3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RF_35/09.14/6.2 Declaration of calibration options Factory Calibration Standard delivery for this calibration standard includes a Factory Calibration. The Calibration Certificate issued reports individual calibration results, traceable to Rosenberger standards , national / international standards are not available. Model based standard definitions are reported in an Agilent/Keysight, Rohde & Schwarz and Anritsu compatible VNA format. Accredited Calibration Not available. For further, more detailed information see application note AN001 on the Rosenberger homepage. Calibration interval Recommendation 12 months Packing Standard 1 pce in box Weight 100 g/pce Draft Date Approved Date Rev. Engineering change n umber Name Date While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary.