AMS78LXX ADMOS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 Advanced AMS78LXX Monolithic 100mA VOLTAGE REGULATOR Systems FEATURES APPLICATIONS

  • • 5.0V, 6.2V and 8.0V Output Voltage Available* •• Battery Powered Systems
  • • Output Voltage Tolerance of ±±5% Over Temperature •• Portable Consumer Equipment
  • • Output Current in excess of 100mA •• Cordless Telephones
  • • Internal Thermal Overload Protection •• Portable (Notebook) Computers
  • • Overvoltage Protection •• Portable Instrumentation
  • • Short Circuit protection •• Radio Control Systems
  • • TO-92, SO-8 and SOT-89 Packages Available •• Logic Systems GENERAL DESCRIPTION The AMS78LXX series consists of positive fixed voltage regulators ideally suited for use in battery-powered systems. These devices feature very low quiescent current of 1mA or less when supplying 10mA loads. This unique characteristic and the low input -output differential of less than 1V required for proper regulation, make the AMS78LXX ideal to use for standby power systems and portable equipment. The AMS78LXX series also includes internal current limiting, over voltage protection, thermal shutdown, and is able to withstand temporary power-up with mirror-image insertion. The AMS78LXX series is offered in the 3-pin TO-92 package, 8-pin plastic SOIC and SOT-89 packages.

ORDERING INFORMATION

OUTPUT PACKAGE TYPE OPER. TEMP VOLTAGE* TO-92 8 LEAD SOIC SOT-89 RANGE 5.0V AMS78L05N AMS78L05S AMS78L05L IND 6.2V AMS78L62N AMS78L62S AMS78L62L IND 8.0V AMS78L08N AMS78L08S AMS78L08L IND * For other fixed voltages consult factory. PIN CONNECTION TO-92 Plastic Package (N) 8L SOIC SO-Package (S) (L) OUTPUT INPUT GND N/C OUTPUT N/C INPUT GROUND GROUND GROUNDGROUND 1 2 3 OUTPUTGNDINPUT Bottom View Top View Front View

Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMS78LXX ABSOLUTE MAXIMUM RATINGS (Note 1) Input Voltage 24V Storage Temperature -65 °C to +150 °C Power Dissipation (Note 4) Internally Limited Lead Temperature (Soldering 10 sec) 230 °C Operating Junction Temperature 0 °C to +125 °C ESD 1000V

ELECTRICAL CHARACTERISTICS

Electrical Characteristics at V IN =10V, I O =10mA, T J =25 ° C, C 1 =0.33 µF, C O = 10 µF unless otherwise specified. PARAMETER CONDITIONS (Note 2) Min. Typ. Max. Units Output Voltage 4.80 5.0 5.2 V 7V ≤V IN ≤20V, I O =100 mA 4.75 5.25 V 7V ≤V IN ≤ 20V 18 75Line Regulation 8V ≤V IN ≤ 20V 10 54 mV 1mA ≤I O ≤ 100 mA 20 60Load Regulation 1mA ≤I O ≤ 40 mA 5 30 mV Quiescent Current 0.6 1.0 mA Output Noise Voltage 10Hz-100kHz 40 µV Peak Output Current 200 mA Average Output Voltage Tempco I O = 5 mA -0.65 mV/ °C Ripple Rejection f O = 120Hz 8V ≤V IN ≤ 16V 47 62 dB Minimum Value of Input Voltage Required to Maintain Line Regulation 5.6 6.0 V AMS78L62 Electrical Characteristics at V IN =12V, I O =10mA, T J =25 ° C, C 1 =0.33 µF, C O = 10 µF unless otherwise specified. PARAMETER CONDITIONS (Note 2) Min. Typ. Max. Units Output Voltage 5.95 6.2 6.45 V 8.5V ≤V IN ≤20V, I O =100 mA 5.9 6.5 V 8.5V ≤V IN ≤ 20V 65 175Line Regulation 9V ≤V IN ≤ 20V 55 125 mV 1mA ≤I O ≤ 100 mA 13 80Load Regulation 1mA ≤I O ≤ 40 mA 6 40 mV Quiescent Current 0.6 1.0 mA Output Noise Voltage 10Hz-100kHz 50 µV Peak Output Current 200 mA Average Output Voltage Tempco I O = 5 mA -0.75 mV/ °C

Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMS78LXX ELECTRICAL CHARACTERISTICS ( Continued) AMS78L62 Electrical Characteristics at V IN =12V, I O =10mA, T J =25 ° C, C 1 =0.33 µF, C O = 10 µF unless otherwise specified. PARAMETER CONDITIONS (Note 2) Min. Typ. Max. Units Ripple Rejection f O = 120Hz 10V ≤V IN ≤ 20V 40 46 dB Minimum Value of Input Voltage Required to Maintain Line Regulation 6.8 7.0 V AMS78L08 Electrical Characteristics at V IN =14V, I O =10mA, T J =25 ° C, C 1 =0.33 µF, C O = 10 µF unless otherwise specified. PARAMETER CONDITIONS (Note 2) Min. Typ. Max. Units Output Voltage 7.60 8.0 8.40 V 11V ≤V IN ≤23V, I O =100 mA 7.60 8.40 V 11V ≤V IN ≤ 23V 80 175Line Regulation 12V ≤V IN ≤ 23V 70 125 mV 1mA ≤I O ≤ 100 mA 15 80Load Regulation 1mA ≤I O ≤ 40 mA 8 40 mV Quiescent Current 0.6 1.0 mA Output Noise Voltage 10Hz-100kHz 60 µV Peak Output Current 200 mA Average Output Voltage Tempco I O = 5 mA -0.78 mV/ °C Ripple Rejection f O = 120Hz 12V ≤V IN ≤ 22V 39 45 dB Minimum Value of Input Voltage Required to Maintain Line Regulation 9.0 9.5 V Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. For guaranteed performance limits and associated test conditions, see the Electrical Characteristics tables. Note 2: See Circuit in Typical Applications. To ensure constant junction temperature, low duty cycle pulse testing is used. Note 3: Limits appearing in boldface type apply over the entire junction temperature range for operation. Limits appearing in normal type apply for T A = T J = 25 °C. Note 4: The junction-to-ambient thermal resistance are as follows: 195 °C/W for the TO-92 (N) package, 160 °C/W for the molded plastic SO-8 (S), 150 °C/W for the SOT-89 package.

Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMS78LXX TYPICAL PERFORMANCE CHARACTERISTICS Line Transient Response TIME ( µs) OUTPUT VOLTAGE DEVIATION (mV) C 2 = 100 µF 0 15 30 45

3 V IN = V OUT = 9V

6.0 Low Voltage Behavior 2.0 3.0 4.0 5.0 INPUT VOLTAGE (V) AMS78L05 I O = 100mA 0 10 20 600 400 200 Peak Output Current INPUT VOLTAGE (V) OUTPUT CURRENT ( m A) 100 500 300 T J = 85° C T J = 25° C T J = -40° C 0 40 80 0.6 0.4 0.2 Dropout Voltage 120 JUNCTION TEMPERATURE (° C) INPUT OUTPUT DIFFERENTIAL (V) 0.1 0.5 0.3 -40 40 80 120 QUIESCENT CURRENT (mA) Quiescent Current TEMPERATURE (° C) 0 30 60 Quiescent Current OUTPUT CURRENT (mA) QUIESCENT CURRENT (mA)5 -20 -10 0 10 20 30 40 50 60 INPUT VOLTAGE (V) Output at Voltage Extremes OUTPUT VOLTAGE (V)0 AMS78L05 R L =500 Ω OUTPUT VOLTAGE (V) INPUT VOLTAGE CHANGE (V) ~~~~ V IN = 14V 20 Load Transient Response TIME ( µs) OUTPUT VOLTAGE DEVIATION (mV) C 2 = 100 µF 0 15 30 45 150 -40 LOAD CURRENT(mA) ~~~~ I O = 100mA I O = 50mA I O = 0mA -20 -10 0 10 20 30 40 50 60 INPUT VOLTAGE (V) Quiescent Current QUIESCENT CURRENT ( m A) 5V OUTPUT I O = 50 m A I O = 100 m A

Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMS78LXX TYPICAL PERFORMANCE CHARACTERISTICS (Continued) TYPICAL APPLICATIONS Fixed Output Regulator AMS78LXX V IN UNREGULATED INPUT V O UT REGULATED OUTPUT C2** 10 µF C1* 0.33 µF GND IQ *Required if regulator is located far from power supply filter. **C2 must be at least 10 µF to maintain stability; it can be increased without bound to maintain regulation during transients and it should be located as close as possible to the regulator. This capacitor must be rated over the same operating temperature range like the regulator. Current Regulator I OUT = (V OUT /R1)+I Q >I Q = 1.5mA over line and load changes Maximum Power Dissipation (SOT-89) AMBIENT TEMPERATURE (° C) 0 10 40 60 80 1.2 1.4 1.8 2.2 2.0 1.6 1.0 0.8 0.6 0.4 0.2 POWER DISSIPATION (W) 20 30 50 70 90 100 0.5 1.0 Maximum Power Dissipation (SO-8) 0.1 0.2 0.3 0.4 0.6 0.7 0.8 0.9 AMBIENT TEMPERATURE (° C) POWER DISSIPATION (W) 10 20 30 40 50 60 70 80 900 0.5 1.0 Maximum Power Dissipation (TO-92) 0.1 0.2 0.3 0.4 0.6 0.7 0.8 0.9 AMBIENT TEMPERATURE (° C) POWER DISSIPATION (W) 0.125" Lead Lenght from PC Board 10 20 30 40 50 60 70 800 0.4" Lead Lenght from PC Board AMS78LXXINPUT OUTPUT R 1C1 0.33 µF I OUT

Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMS78LXX PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted.

3 LEAD TO-92 PLASTIC PACKAGE (N)

8 LEAD SOIC PLASTIC PACKAGE (S)

0.140±0.010 (3.556±0.127) 0.060±0.010 (1.524±0.254) 0.015±0.002 (1.270±0.127) 0.060±0.005 (1.524±0.127) DIA 0.180±0.005 (4.572±0.127) 0.180±0.005 (4.572±0.127) 0.050 (1.270) MAX 0.500 (12.70) MIN UNCONTROLLED LEAD DIMENSIONS 10° NOM5° NOM N (TO-92 ) AMS DRW# 042391 0.90 (2.286) NOM 0°-8° TYP 0.010-0.020 (0.254-0.508) S (SO-8 ) AMS DRW# 042293 x 45° 0.016-0.050 (0.406-1.270) 0.008-0.010 (0.203-0.254) 0.004-0.010 (0.101-0.254) 0.014-0.019 (0.355-0.483) 0.053-0.069 (1.346-1.752) 0.050 (1.270) TYP 0.150-0.157** (3.810-3.988) 0.228-0.244 (5.791-6.197) 0.189-0.197* (4.801-5.004) *DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE **DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE 1 2 3 4 8 7 6 5

Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMS78LXX PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted (Continued). SOT-89 PLASTIC PACKAGE (L) 0.090-0.102 (2.29-2.60) 0.173-0.181 (4.40-4.60) 0.064-0.072 (1.62-1.83) 0.155-0.167 (3.94-4.25) 0.059 (1.50) BSC 0.035-0.047 (0.89-1.20) L (SOT-89 ) AMS DRW# 042392 0.118 (3.00) BSC 0.014-0.019 (0.36-0.48) 0.017-0.022 (0.44-0.56) 0.084-0.090 (2.13-2.29) 0.055-0.063 (1.40-1.60) 0.014-0.017 (0.35-0.44)