AMS4558 AMS | Alldatasheet
Document overview
- Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Features
Operating voltage: ±3V ～±18V. Large DC voltage gain: 100 dB Low input noise voltage: 1µVRMS Wide gain bandwidth product: 5 MHz Slew rate: 2V/µs Package outline: DIP8, SOIC8
Applications
Audio AC-3 decoded system. Audio amplifier Functional Diagram Page 1 of 7
Symbol Pin NO. Description OUT1 1 Output 1 IN1- 2 Inverting input1 IN1+ 3 Non- Inverting input1 V- 4 VEE IN2+ 5 Non- Inverting input2 IN2- 6 Inverting input2 OUT2 7 Output 2 V+ 8 VCC Absolute Maximum Ratings Parameter Symbol Value Unit Power Supply Voltage VCC +18 V VEE -18 Differential Input Voltage V ID ±30 V Input Voltage V IC ±15 V Power Dissipation P D DIP 500 mW SOIC 250 Operating Temperature Range T OP 40 to 85 ℃ Storage Temperature Range T STG 60 to 150 ℃ Page 2 of 7 Pin Description
Electrical Characteristics (Vcc=+15V,VEE =-15V,TA =25℃ unless otherwise specified) Parameter Conditions Min Typ Max Unit Input Offset Voltage Rs≤10KΩ 2 6 mV Input bias Current 60 500 nA Input Offset Current 5 200 nA Supply Current 3.5 5.8 mA Large Signal Voltage Gain RL ≥ 2K Ω,Vo=±10V 85 100 dB Common Mode Rejection Ratio Rs≤10KΩ 70 90 dB Power Supply Rejection Ratio Rs≤10KΩ 70 90 dB Output Voltage Swing RL ≥ 2K Ω ±10 ±13 V RL ≥ 10K Ω ±12 ±14 Output Sink Current V=1V,V+=0V,Vo=2V 40 mA Output Source Current V=1V,V+=0V,Vo=2V 40 mA Slew Rate 2 V/µS Equivalent Input Noise Voltage RIAA,Rs=1KΩ,30kHz LPF 1 µVRMS Gain Bandwidth Product f=10KHz 5 MHz Page 3 of 7
Typical Performance Characteristics Open Loop Voltage Gain vs. Frequency Maximum Output Voltage Swing vs. Frequency Maximum Output Voltage Swing vs. Load Equivalent lnput Noise Voltage vs. Frequency Resistance Input Offset Voltage vs. Temperature Input Bias Current vs. Temperature Page 4 of 7
SOP8 PACKAGE OUTLINE DIMENSIONS Page 5 of 7
DIP8 PACKAGE OUTLINE DIMENSIONS Page 6 of 7
Disclaimer:
- AMS reserves the right to make changes to the information herein for the improvement of the design and performance without further notice! Customers should obtain the latest relevant information before placing orders and should verify that such information is complete and current.
- All semiconductor prod ucts malfunction or fail with some probability under special conditions. When using AMS products in system design or complete machine manufacturing, it is the responsibility of the buyer to comply with the safety standards strictly and take essential measures to avoid situations in which a malfunction or failure of such AMS products could cause loss of body injury or damage to property.
- AMS will supply the best possible product for customers!