DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
■ Non-contacting magnetic technology ■ Highly resistant to vibration/shock ■ Highly resistant to fl uid/dust ingress ■ Programmable at factory for zero position ■ Robust design for industrial applications ■ Highly repeatable ■ RoHS compliant* AMS22S Non-Contacting Analog Rotary Position Sensor *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. Electrical Characteristics1 (@ 25 °C) Supply Current 2 (±0.3 % available on request) Effective Electrical Angle Environmental Characteristics Mechanical Characteristics (@ 25 °C) Soldering Condition rosin cored wire; 370 °C (700 °F) max. for 3 seconds 260 °C (500 °F) max. for 5 seconds 1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted. 2 See “Processing Speed” in How to Order selection guide. 3 Other Effective Electrical Angles available. See How to Order selection guide. *RoHS COMPLIANT Product Dimensions + S1 CW S1 V OUT CCW OUTPUT VOLTAGE INCREASES WHEN SHAFT IS ROTATED IN THIS DIRECTION (SEE HOW TO ORDER FOR DIRECTION CODE) 12.7 ± 0.76 (.500 ± .030) 1.57 ± 0.10 (.062 ± .004) 1.57 ± 0.10 (.062 ± .004) 1.57 ± 0.10 (.062 ± .004) 3.167 +.000/-.025 MAX. DIA. 3 PLCS. 3 PLCS.0.51 (.020) 22.23 (.875) DIA. 19.69 (.775) MAX. DIA. 5.08 (.200) 3 PLCS. GND (GROUND) SIGNAL (OUTPUT) V+ SUPPLY (INPUT) 4.06 ± 0.38 (.160 ± .015) 5.08 (.200) 5.08 (.200) 45 ° ± 5 ° 1.02 (.040)2.80 ± 0.10 (.110 ± .004) 0.51 (.020) 2.03 (.080) 1.55 ± 0.25 (.061 ± .010) 19.05 +.000/-.025 (.750 +.000/-.001) 19.69 (.775) 15.62 (.615) VDD (5 V) GND 3.18 +.000/-.025 DIA. MIN. 2.67 +.000/-.076 (.105 +.000/-.003) 7.80 (.307) FLATTED OPTION DIMENSIONS: MM (INCHES) Schematic Rotational Life vs. Shaft Side Load 0 100 200 Shaft Side Load (grams) Rotational Life (Millions of Cycles) 300 400 50050 150 250 350 450 Fig.
Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. AMS22S Non-Contacting Analog Rotary Position Sensor How To Order REV. 01/14 AMS 2 2 S 5 A 1BL AF L 334 Code S
Description
S Servo Mount, 1/2 ” Shaft FMS, 1/8 ” Shaft Dia. MOUNTING CONFIGURATION Code AM
12 Bit
10 ° 20 ° 30 ° 340 ° 350 ° 360 ° EFFECTIVE ELECTRICAL ANGLE 10 ° Increments Code
5 VDC
SUPPLY VOLTAGE, VCC Code H L Output Refresh Rate High (200 μs Typ.) Low (600 μs Typ.) PROCESSING SPEED Code F R A B C 1-99 % of VCC 5-95 % of VCC 10-90 % of VCC VOLTAGE RATIO ±1 % Code CCW (Increasing Voltage) CW (Increasing Voltage) Shaded areas represent most common features. Note: Effective Electrical Angle available in 10 ° increments from a minimum of 10 ° to 360 ° maximum. * See Figure 1 for clarification. DIRECTION* Code B C 0.5 % 0.3 % INDEPENDENT LINEARITY Code L Standard Output: 1-Turn CW Increasing (Code 334 Shown) Asia-Pacifi c: Tel: +886-2 2562-4117 Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 Fax: +1-951 781-5700 www.bourns.com 100 CW DIRECTIONMechanical Angle (°) Vout (%) 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320340 360 VOLTAGE RATIO “A” VOLTAGE RATIO “C”