AMS22S5A1BHAF BOURNS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

n Non-contacting magnetic technology n Highly resistant to vibration/shock n Highly resistant to fluid/dust ingress n Programmable at factory for zero position n Robust design for industrial applications n Highly repeatable n RoHS compliant* AMS22S Non-Contacting Analog Rotary Position Sensor *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Electrical Characteristics1 (@ 25 °C) Supply Current 2 (±0.3 % available on request) Environmental Characteristics Mechanical Characteristics (@ 25 °C) Soldering Condition rosin cored wire; 370 °C (700 °F) max. for 3 seconds 260 °C (500 °F) max. for 5 seconds 1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted. 2 See “Processing Speed” in How to Order selection guide. 3 Other Effective Electrical Angles available. See How to Order selection guide. *RoHS COMPLIANT LEAD FREE *RoHS COMPLIANTVERSIONS AVAILABLE LEAD FREE VERSIONS ARE RoHS COMPLIANT* Product Dimensions + S1 CW S1 VOUT CCW OUTPUT VOLTAGE INCREASES WHEN SHAFT IS ROTATED IN THIS DIRECTION (SEE HOW TO ORDER FOR DIRECTION CODE) 12.7 ± 0.76 (.500 ± .030) 1.57 ± 0.10 (.062 ± .004) 1.57 ± 0.10 (.062 ± .004) 1.57 ± 0.10 (.062 ± .004) 3.167 +.000/-.025 MAX. DIA. 3 PLCS. 3 PLCS.0.51 (.020) 22.23 (.875) DIA. 19.69 (.775) MAX. DIA. 5.08 (.200) 3 PLCS. GND (GROUND) SIGNAL (OUTPUT) V+ SUPPLY (INPUT) 4.06 ± 0.38 (.160 ± .015) 5.08 (.200) 5.08 (.200) 45 ° ± 5 ° 1.02 (.040)2.80 ± 0.10 (.110 ± .004) 0.51 (.020) 2.03 (.080) 1.55 ± 0.25 (.061 ± .010) 19.05 +.000/-.025 (.750 +.000/-.001) 19.69 (.775) 15.62 (.615) VDD (5 V) GND 3.18 +.000/-.025 DIA. MIN. 2.67 +.000/-.076 (.105 +.000/-.003) 7.80 (.307) FLATTED OPTION DIMENSIONS: MM (INCHES) Schematic Rotational Life vs. Shaft Side Load 0 100 200 Shaft Side Load (grams) Rotational Life (Millions of Cycles) 300 400 50050 150 250 350 450 Fig.

Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. AMS22S Non-Contacting Analog Rotary Position Sensor How To Order AM S2 2S 5A1B LA FL 33 4 Code S

Description

S Servo Mount, 1/2 ” Shaft FMS, 1/8 ” Shaft Dia. MOUNTING CONFIGURATION Code AM

12 Bit

10 ° 20 ° 30 ° 340 ° 350 ° 360 ° EFFECTIVE ELECTRICAL ANGLE 10 ° IncrementsCode

5 VDC

SUPPLY VOLTAGE, V CC Code H L Output Refresh Rate High (200 µs Typ.) Low (600 µs Typ.) PROCESSING SPEED Code F R A B C 1-99 % of VCC 5-95 % of VCC 10-90 % of VCC VOLTAGE RATIO ±1 % Code CCW (Increasing Voltage) CW (Increasing Voltage) Shaded areas represent most common features. * See Figure 1 for clarification. DIRECTION* Code B C 0.5 % 0.3 % INDEPENDENT LINEARITY Code L Notes:

  • E ffective Electrical Angle a vailable in 10 ° increments from a minimum of 10 ° to 360 ° maximum.
  • Use Code "BB" for 45°. REV. 01/17 Standard Output: 1-Turn CW Increasing (Code 334 Shown) 0 100 200 Shaft Side Load (grams) Rotational Life (Millions of Cycles) 300 400 50050 150 250 350 450 0 100 200 Shaft Side Load (grams) Rotational Life (Millions of Cycles) 300 400 50050 150 250 350 450 100 CW DIRECTIONMechanical Angle (°) Vout (%) 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320340 360 VOLTAGE RATIO “A” VOLTAGE RATIO “C” EEA Resolution 10 114 20 228 30 341 40 455 45 512 50 569 60 683 70 796 80 910 90 1024 100 1138 110 1252 120 1365 Resolution EEA Resolution 130 1479 140 1593 150 1707 160 1820 170 1934 180 2048 190 2162 200 2276 210 2389 220 2503 230 2617 240 2731 250 2844 EEA Resolution 260 2958 270 3072 280 3186 290 3300 300 3413 310 3527 320 3641 330 3755 340 3868 350 3982 360 4096