AMPLH7025S ABRACON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Molded Inductor (Carbonyl) AMPLH7025S 7.3 x 6.6 x 2.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory REVISION Initial Release : 2/28/2024
5101 Hidden Creek Ln, Spicewood TX 78669
Phone: 512-371-6159 Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Test Conditions Isat: DC current at which the inductance drops 30% from its initial value. Irms: DC current that causes the temperature rise (ΔT, approximate 40˚C) from 25˚C ambient. Operating Temperature: -40˚C ~ +125˚C (including self-temperature rise) Storage Condition: -40˚C ~ +125˚C (on board), -10˚C ~ +40˚C (with packaging) and R.H. 85% max. Operating Voltage: 50V (across inductor) AMPLH7025S Series is RoHS Compliant and Pb free. For saturation and temperature rise graphs, please visit Abracon | Power Inductor Performance Analyzer (PIPA) Part Number Inductance Tolerance DC Resistance Saturation Current Temperature Rise Current Units μH % mΩ A A Symbol L M DCR Isat Irms
- Shielded construction
- Soft saturation
- Low DCR, High Efficiency
- Designed for switching frequencies between 100KHz-2MHz
- DC/DC Switching converters
- Power supplies for Notebooks, workstations, and Servers
- Low Profile applications
- High current, transient load applications Electrical Specifications Applications Features
Molded Inductor (Carbonyl) AMPLH7025S 7.3 x 6.6 x 2.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory REVISION Initial Release : 2/28/2024 Phone: 512-371-6159 Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com XXX YYWW AMPLH7025S - Marking Method = Ink Marking Inductance Code See Electrical Specification table Packaging T: Tape and Reel (See Packaging) Blank: Bulk Tolerance M = ± 20% Part Identification Marking Inductance Code e.g. 2R2 W: Week: E.g. 05 for the 5th week of the year. Y: Year: E.g. 24 for 2024
Molded Inductor (Carbonyl) AMPLH7025S 7.3 x 6.6 x 2.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory REVISION Initial Release : 2/28/2024 Phone: 512-371-6159 Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Dimensions: Inches [mm] Mechanical Specifications
Molded Inductor (Carbonyl) AMPLH7025S 7.3 x 6.6 x 2.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory REVISION Initial Release : 2/28/2024 Phone: 512-371-6159 Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Components Material a Core Alloy Powder b Wire Polyester Wire c Electrode Cu/Ni/Sn d Marking Ink Materials
Molded Inductor (Carbonyl) AMPLH7025S 7.3 x 6.6 x 2.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory REVISION Initial Release : 2/28/2024 Phone: 512-371-6159 Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Time of 25°C to peak temperature: 8 mins Max Ramp up rate: 3°C/Second max. Ramp down rate: 6°C/Second max. Zone Description Temperature Times
1 Preheat TSMIN ~ TSMAX
150°C ~ 200°C 60 ~ 120 sec.
2 Reflow TL
≥217°C 60 ~ 150 sec.
3 Peak heat TP
260°C 30 sec. MAX Reflow Profile
Molded Inductor (Carbonyl) AMPLH7025S 7.3 x 6.6 x 2.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory REVISION Initial Release : 2/28/2024 Phone: 512-371-6159 Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Tape & Reel: 1500 pcs/reel Dimensions: mm A0 B0 W F P D K0 T Type A B C D ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life -dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authori zation from Abracon LLC is required. Please contact Abracon LLC for more information. Packaging