AMPLA5030Q ABRACON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

AMPLA5030Q AUTOMOTIVE MOLDED INDUCTOR Revised 12/26/19

  • AEC-Q200 Qualified
  • Shielded construction
  • Soft saturation
  • High current density
  • Designed for switching frequencies between 100KHz-2MHz ELECTRICAL SPECIFICATIONS @ 25°C PART NUMBER* INDUCTANCE (uH) TOLERANCE (%) IRMS (A) ISAT (A) DC RESISTANCE (mΩ) TYPE TYP MAX AMPLA5030Q-R56MT 0.56 20 10.0 15.0 8.0 10 Lead Frame AMPLA5030Q-R68MT 0.68 20 8.5 14.0 10.0 12 Lead Frame AMPLA5030Q-R82MT 0.82 20 8.0 12.5 11.5 13 Lead Frame AMPLA5030Q-1R0MT 1.0 20 7.0 11.0 13 14 Lead Frame AMPLA5030Q-1R2MT 1.2 20 6.5 11.0 14 16 Lead Frame AMPLA5030Q-1R5MT 1.5 20 6.0 10.0 16 25 Lead Frame AMPLA5030Q-2R2MT 2.2 20 5.5 9.0 25 35 Lead Frame AMPLA5030Q-3R3MT 3.3 20 5.0 8.0 32 38 Lead Frame AMPLA5030Q-4R7MT 4.7 20 4.6 6.0 50 53 Lead Frame AMPLA5030Q-5R6MT 5.6 20 4.25 4.5 55 63 Lead Frame AMPLA5030Q-6R8MT 6.8 20 4.0 4.3 68 76.2 Lead Frame AMPLA5030Q-100MT 10.0 20 2.75 3.5 110 128 Lead Frame AMPLA5030Q-150MT 15.0 20 2.1 2.6 165 190 Lead Frame AMPLA5030Q-220MT 22.0 20 1.9 1.7 220 250 Lead Frame Test Conditions Inductance: 100 kHz, 1 V, 0 Adc Humidity Range: 85 ± 2% RH Temperature Rise Current: Current measured at ∆ T of 40°C Saturation Current: Current measured at ∆ L of 30% AMPLA5030Q 1R0 M T Series Inductance* Tol. 1 Packaging 2 1. Tolerance: M = 20% 2. Packaging: B = Bulk N = 30% T = Tape and Reel (2,000pcs/reel) *Refer to Electrical Specification table PART BUILDER

FEATURES

Operating Temperature: -55°C to +125°C with (40°C rise) Irms current. Maximum Part Temperature: +125°C Components Storage Temperature: -55°C to +125°C Tape and Reel Packaging Temperature: -55°C to +80°C MSL: Level 1 Not recommended for D.I. water wash GENERAL SPECIFICATIONS PRODUCT DIMENSIONS MATERIALS Core: Carbonyl Powder Wire: Copper Terminal: Tin Plating Ink: Black Paint: Gray LLC 2.8 ± 0.20 6.5 1.8 2.5 1.1 ± 0.3 1.5 ± 0.2 Top View Bottom View Front View Side View RECOMMENDED LANDING PATTERN Dimensions: mm * Please refer to Part Identification section 5.7 ± 0.3 5.2 ± 0.2 Check InventoryRequest Samples AEC-Q200 QUALIFIED ISO 9001:2015 CERTIFIED ROHS COMPLIANT Pb

AMPLA5030Q AUTOMOTIVE MOLDED INDUCTOR Revised 12/26/19 T p T L T L T p T SMIN T SMAX Ramp Up Ramp Down Critical Zone T L to T p Time t 25˚C to Peak Preheat Temperature RECOMMENDED REFLOW PROFILE ZONE DESCRIPTION TEMPERATURE TIMES

1 Preheat Tsmin ~ Tsmax

150°C ~ 200°C 60 ~ 180 sec.

2 Reflow TL

217°C 60 ~ 150 sec.

3 Peak Heat TP

260°C 10 sec. MAX LLC

AMPLA5030Q AUTOMOTIVE MOLDED INDUCTOR Revised 12/26/19 PACKAGING TYPE A B C D B0 A0 K0 P W F T D Tape and Reel: 2,000 Units per Carton: 16,000 T&R per Carton: 8 Weight per Carton: 12.5 kg Weight per Unit: 0.46 g Carton Dimensions: 410 x 325 x 415 mm This product is commercial off-the-shelf (COTS) and not specifically designed for automotive, military, aviation, aerospace, implantable, life-dependent medical or safety applications. This product is not recommended for use in any application requiring high reliability in which component failure could result in loss of life and/or property damage without prior written approval from Abracon. Specifications are subject to change without notice. Contact Abracon for more information. Headquarters:

5101 Hidden Creek Ln Spicewood TX 78669

Phone: 512-371-6159 | Fax: 512-351-8858LLC Dimensions: mm