AMP1201

AMP1201 ASTRODYNE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

12W Medical Grade Wallmount Switching Power Adapters AMP1201 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 Wide Universal 80-275VAC Input UL/EN/IEC60601-1 3rd Edition Approvals; 2MOPP Over Voltage & Over Load Protection 4000VAC Isolation Class II, 2 Prong U.S. Input Efficiency Level V Model Number Output Watts Output Voltage Output Amps Total Regulation (Note 2) Efficiency AMP1201-02 10 5VDC 2.0 ± 5% 74% AMP1201-03 12 6VDC 2.0 ± 5% 76% AMP1201-04 12 9VDC 1.33 ± 5% 79% AMP1201-05 12 12VDC 1.0 ± 5% 79% AMP1201-06 12 15VDC 0.8 ± 5% 81% AMP1201-07 12 18VDC 0.66 ± 3% 81% AMP1201-08 12 24VDC 0.5 ± 3% 81% RoHS2 2011/65/EU

12W Medical Grade Wallmount Switching Power Adapters AMP1201 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. All specifications are typical at nominal input, full load, and 25°C unless other- wise noted INPUT SPECIFICATIONS Input Voltage Range 80-275 VAC (100-240V Nominal) Frequency Range 47-63 Hz Input Current Low Line (100VAC) 0.29A max. High Line (240VAC) 0.16A max. Inrush Current, typ (Cold Start) Low Line (100VAC) 50A max. High Line (230VAC) 100A max. Leakage Current <100 uA Protection Class Double Insulated, Class II No Load Power Consumption 0.3W OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Output Power Range 0 to FL Rating Line Regulation (FL) (Note 1) ± 1%, max. Over Voltage Protection 112-132% Over Load Protection 110-150% Auto-Recovery Transient Response 110Vin, FL 4mS Temperature Coefficient ±0.04%/°C, typ Ripple/Noise (Note 3) FL, 90Vin 1% Pk-Pk max. Short Circuit Protection Continuous, self-recovering * Start Up / Hold Up Time 100Vin, FL 2S max. / 16mS min. GENERAL SPECIFICATIONS Input-Out Isolation 4000 VAC Efficiency (FL, Nom. Vin) See Selection Chart Safety ANSI/AAMI ES 60601-1:2005 (UL/cUL/EN/IEC 3rd Edition) PHYSICAL SPECIFICATIONS Size 2.56” x 2.17” x 1.40” (65x55x35.6mm) Construction Wallmount Style Weight 5.64oz (160g) ENVIRONMENTAL SPECIFICATIONS Oper. Temperature -10 to +50°C (FL) * 50% Load @ 70°C (See Derate Curve Next Page) Cooling Free Air Convection Flammability Rating UL94V-1 Storage Temperature -40 to +85°C (10-95% RH) * Operating/Storage Humidity 0% to 95%, non-cond * EMC Compliance to EN55011 (CISPR11), EN61000-3-2,-3 Class B MTBF (MIL-HDBK-217F, 25 °C) 100,000 Hrs min. Efficiency Level V Surge Voltage 2kV min. ESD Air: IEC61000-4-2, 8kV min. Contact: IEC61000-4-2, 6kV min. Operating Altitude 3000M max. Vibration 10 ~ 500Hz, 10min./1cycle, 60min. each along X, Y, Z axes, 5G min NOTES 1. Line Regulation defined as changing the input voltage ±10% from nominal line at rated load. 2. Total Regulation is defined by as changing the load ±40% from 60% rated load. 3. Ripple & Noise is measured by using a 20MHz bandwidth limited oscilloscope and terminating the output with a 0.47uF capacitor at rated load and nominal line.

12W Medical Grade Wallmount Switching Power Adapters AMP1201 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 MECHANICAL DIMENSIONS DC OUTPUT CONNECTIONS Coaxial Plug: +Vout-Vout 5.5mm outer diameter 2.1mm inner diameter, female 11mm length, center “+” Dimensions Are In mm. DERATE CURVES 5214 medical MPU12A□□series SPECIFICATION□NOTE□: 1.□Output□can□provide□up□to□peak□load□when□the□power□supply□starts□up. Continuous□staying□in□more□than□rated□load□is□not□allowed. 2.□At□factory,□in□60%□rated□load□condition,□each□output□is□checked□to□be within□voltage□accuracy. 3.□Line□regulation□is□defined□by□changing□±10%□of□input□voltage□from nominal□line□at□rated□load. 4.□Load□regulation□is□defined□by□changing□±40%□of□measured□output□load from□60%□rated□load. 5.□Ripple□&□noise□is□measured□by□using□20MHz□bandwidth□limited oscilloscope□and□terminated□each□output□with□a□0.47uF□capacitor□at rated□load□and□nominal□line. time□which□the□main□output□drops□down□to□low□limit□of□main□output□at rated□load□and□nominal□line. 7.□Efficiency□is□measured□at□rated□load,□and□nominal□line. 8.□The□specifics□for□testing□the□energy□efficiency□of□this□Series□are□outlined in□a□separate□document□titled□"Test□Method□for□Calculating□the□Energy Efficiency□of□Single-Voltage□Interchangeable□AC-DC□and□AC-AC□Power Supplies□(August□11,□2004),"□which□is□available□on□the□ENERGY□STAR Website. MECHANICAL□DIMENSIONS: (□UNIT:□mm□) OUTPUT□CABLE□RECOMMEND□: PACKING□: 1.□Selected□output□connectors□and□wire,□please□refer□to□Appendix. 2.□MPU12A-102~103□are□required□to□use□AWG#18/6FT□output□cable. 3.□MPU12A-104~108□are□required□to□use□AWG#20/6FT□output□cable. 4.□The□regulation□and□efficiency□□will□be□changed□by□modified□output□cable. 1.□Net□weight:□130g approx. 2.□Optional□output□connectors□available□contact□sales□for□details. Rating□Chart: INPUT□VOLTAGE□(VAC) LOAD□(%) 100 110 100 120 140 160 180 200 220 240 260 280 (FIG.1)□INPUT□VOLTAGE□DERATING□CURVE MODEL□NO. Voltage□Range min (VDC) (VDC) (A) (A) (W) (W) (ms)(mVp-p) (%) (%) minmax max Output□Current (Based□on□the□output□volt.) Maximum Output□Power Ripple□&□Noise Total□Regulation Typ.□Efficiency No□Load Consumption Hold-Up□Time Protection□Mode OLP OLP OLP OLP OLP OLP OLP 0.3 0.3 0.3 0.3 0.3 0.3 100 100 100 100 2.00 1.50 1.09 0.92 0.75 0.57 1.50 1.09 0.92 0.75 0.57 0.44 8.0 11.0 13.0 6.0 8.0 11.0 13.0 16.0 16.0 21.0 21.0 27.0 MPU12A-103 MPU12A-104 MPU12A-105 MPU12A-106 MPU12A-107 MPU12A-108 12W□External□Medical□Grade□Power□Supply TEMPERATURE□(°C) -10 100 100 110 20 30 40 50 60 70 80 (FIG.2)□TEMPERATURE□DERATING□CURVE medical MPU12A□□series SPECIFICATION□NOTE□: 1.□Output□can□provide□up□to□peak□load□when□the□power□supply□starts□up. Continuous□staying□in□more□than□rated□load□is□not□allowed. 2.□At□factory,□in□60%□rated□load□condition,□each□output□is□checked□to□be within□voltage□accuracy. 3.□Line□regulation□is□defined□by□changing□±10%□of□input□voltage□from nominal□line□at□rated□load. 4.□Load□regulation□is□defined□by□changing□±40%□of□measured□output□load from□60%□rated□load. 5.□Ripple□&□noise□is□measured□by□using□20MHz□bandwidth□limited oscilloscope□and□terminated□each□output□with□a□0.47uF□capacitor□at rated□load□and□nominal□line. time□which□the□main□output□drops□down□to□low□limit□of□main□output□at rated□load□and□nominal□line. 7.□Efficiency□is□measured□at□rated□load,□and□nominal□line. 8.□The□specifics□for□testing□the□energy□efficiency□of□this□Series□are□outlined in□a□separate□document□titled□"Test□Method□for□Calculating□the□Energy Efficiency□of□Single-Voltage□Interchangeable□AC-DC□and□AC-AC□Power Supplies□(August□11,□2004),"□which□is□available□on□the□ENERGY□STAR Website. MECHANICAL□DIMENSIONS: (□UNIT:□mm□) OUTPUT□CABLE□RECOMMEND□: PACKING□: 1.□Selected□output□connectors□and□wire,□please□refer□to□Appendix. 2.□MPU12A-102~103□are□required□to□use□AWG#18/6FT□output□cable. 3.□MPU12A-104~108□are□required□to□use□AWG#20/6FT□output□cable. 4.□The□regulation□and□efficiency□□will□be□changed□by□modified□output□cable. 1.□Net□weight:□130g approx. 2.□Optional□output□connectors□available□contact□sales□for□details. Rating□Chart: INPUT□VOLTAGE□(VAC) LOAD□(%) 100 110 100 120 140 160 180 200 220 240 260 280 (FIG.1)□INPUT□VOLTAGE□DERATING□CURVE MODEL□NO. Voltage□Range min (VDC) (VDC) (A) (A) (W) (W) (ms)(mVp-p) (%) (%) minmax max Output□Current (Based□on□the□output□volt.) Maximum Output□Power Ripple□&□Noise Total□Regulation Typ.□Efficiency No□Load Consumption Hold-Up□Time Protection□Mode OLP OLP OLP OLP OLP OLP OLP 0.3 0.3 0.3 0.3 0.3 0.3 100 100 100 100 2.00 1.50 1.09 0.92 0.75 0.57 1.50 1.09 0.92 0.75 0.57 0.44 8.0 11.0 13.0 6.0 8.0 11.0 13.0 16.0 16.0 21.0 21.0 27.0 MPU12A-103 MPU12A-104 MPU12A-105 MPU12A-106 MPU12A-107 MPU12A-108 12W□External□Medical□Grade□Power□Supply TEMPERATURE□(°C) -10 100 100 110 20 30 40 50 60 70 80 (FIG.2)□TEMPERATURE□DERATING□CURVE