AMLB-1810IZ AIMTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

100mA | LED Driver www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.B 1 of 3 North America only FEATURES: Models Single output Model Input Voltage (V) Output Voltage (V) Maximum Rated Current (mA) Efficiency Max (%) AMLB-1810IZ 3-18 5-38 100 90 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units Voltage range 12 3-18 18 VDC On/Off Control (Analog Control) Input voltage range (0-12Vdc) (Leave open if not used) ON: Vr = DC Input Voltage OFF:DC = 0V Dimming Control (Digital Control) Max PWM Frequency (10%~90%) 200Hz Output Specifications Parameters Conditions Typical Maximum Units Current accuracy ±5 % Short Circuit protection Connect an external input fuse (1A/250) Output Open Protection No Load Max load capacitance 100 µF General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 1.2 MHz Operating temperature -40 to +85 oC Storage temperature -40 to +125 oC Max Case temperature 100 oC Cooling Free Air Convection Humidity 95 % RH Case material Non-Conductive Black Plastic Potting material Epoxy (Flammability UL94V-0) Weight 12 g

  • Step Up LED Driver • Constant Output Current
  • Wide (7:1) Input Voltage Range • High Efficiency
  • Remote Control Function
  • 24 Pin DIP Package
  • PWM Dimming Function (10 – 90%)
  • Non-Isolated Click on Series name for product info on aimtec.com

100mA | LED Driver www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.B 2 of 3 North America only Pin Out Specifications Dimensions NC: Not Connected Derating 0 25 7550 85 100 85 º C Safe Operating Area Free Air Convection Ambient Temperature º C 100-40 Output Power % -25 Pin Single

1 Remote On/Off

14 LED +

16 LED -

24 DIM

31.80 (1.25) 23 22 2 3 16 14 9 11 20.30 (0.80) 15.24 (0.60) 11.30 (0.45) 3.80 (0.15) Bottom View 0.50 (0.02) 2.54 (0.1) 5.08 (0.2)

100mA | LED Driver www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.B 3 of 3 North America only Application Circuit AMLB-IZ ON/OFF GND Dim + Vin LED + LED - 1st LED Last LED + Vin Dimming 0.01uF ON/OFF GND Leave Open if not used If analogue DIM is not used C1 must be installed Dimming Performance 100 1 2 3 4 5 6 7 8 9 10 11 Output Current Duty Cycle PWM @ 200 Hz AMLB-1810-IZ Dimming NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate