AML71 HONEYWELL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Manual Switches AML71/75 Series Barriers/Panel Seal Accessories
56 Honeywell 1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
Drawing shows two switches, slot mount- ed. From left to right: one center barrier, a second switch, plus another end barrier to complete the arrangement. When mounting an individual unit, an end barrier is attached to each side of the housing. The center barrier is used in a slot mount array.
FEATURES
1 Barriers separate individually
mounted switches and indicators — help prevent inadvertent actuation of two pushbutton switches with a single push.
1 Front of panel mounting simplifies
installation. AML71 BARRIER ORDER GUIDE (See notes) Barriers shown in order guide are black. Barrier Length Type Catalog Listing Short Center AML71SCB (For use with square devices and short side of rectangular devices.) End AML71SEB Long Center AML71LCB (For use with long side of rectangular devices.) End AML71LEB Notes: Not for use with AML61 mounting hardware or any full guard bezel products. Not for use with AML41J, K, or L lens type indicators; or AML45 annunciators. AML75 PANEL SEAL
1 AML75 panel seals fit pushbutton
switches and indicators.
1 Provides protection from
contamination from accidental beverage spills, dust, and dirt.
1 Easy to install, without tools
1 No effect on display color, light
intensity, or legend quality.
1 Replace seal or change lamps without
removing switch from panel. 1 For .19-inch standard height square or rectangular pushbuttons. 1 Mounting dimensions page 65. The design complements AML’s func- tional appearance, creating a pleasing framed effect around the button. It con- sists of a matte black plastic base which press-fits between the panel and switch bezel, and a transparent flexible seal which snaps into the base. PK 8521, ship- ped with each order, provides installation instructions. Button colors and legends can be viewed without distortion whether lighted or un- lighted. Seals can be conveniently re- placed or removed for relamping, without removing the switch from panel. Operating temperature range is 32 ° to AML75 PANEL SEAL ORDER GUIDE For Use With: Square .19N Rectangular .19N
Description
high pushbuttons high pushbuttons Rockers Base & Seal AML75ABC AML75BBC AML75RBC Base Only AML75ABN AML75BBN — Seal Only AML75ANC AML75BNC — Notes: Multiple units should not be mounted in a single slot, since this would create an unsealed space between each unit. AML75 seals are not for use with barriers, full guard bezels, AML61 mounting hard- ware, AML45 annunciators, or AML41J, K, or L lens type indicators. MATERIAL Base: Polypropylene Cap: Polyvinyl Chloride
Manual Switches AML76/78 Series Switch Guard/Panel Plugs, Dummy Housings Honeywell 1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada57
1 Button cannot be operated when
switch guard cover is closed, preventing accidental operation
1 Wire lock-down feature further
prevents unintentional actuation of the switch.
1 Lamps can be replaced with the
switch guard attached, without special tools, saving maintenance time
1 Can be used with alternate or
momentary action square or rectangular .19 inch standard height AML buttons
1 Shock resistant construction, for long,
AML76 switch guard protects square and rectangular .19-inch standard height pushbuttons from inadvertent actuation. It is for use with standard bezel type switches only. See page 65 for mounting dimensions. The switch guard cover is clear, polycar- bonate thermoplastic through which the button is easily visible. The word ‘‘lift’’ is molded onto the top front edge of the guard. The bracket is bright-finished stainless steel. The switch guard may be assembled to the AML pushbutton before the switch is installed in a panel. Or, the guard can be assembled to a pushbutton already mounted in a panel, providing the wiring is sufficiently slack to raise the switch be- zel above the panel; and if there is suffi- cient clearance with adjacent units. PK 8522 contains installation instructions and is shipped with each order. AML switch guards may be mounted in horizontal or vertical matrices. A wire lock-down feature, using .020-inch diam- eter locking wire, may be used as an addi- tional protection. SWITCH GUARD ORDER GUIDE Guard Type* Catalog Listing Square AML76C10T01P Rectangular AML76F10T01P * The word ‘‘LIFT’’ is molded into the cover. If other languages are desired contact the 800 number. Note: Switch guard is not designed for use with AML61 mounting hardware, AML71 barriers, or full guard bezel switches. CONNECTOR BLOCK AML79CC This connector block can be used with square 1 and 2 pole AML21 and AML22 switches with .110 × .020 terminals to enable plug-in wiring. AML78 PANEL PLUGS Plastic panel plugs (shown above) en- able the user to provide for future needs by punching extra panel holes. Finished in matte black, they are the same height as the standard AML bezel when snap- ped in place from the panel front. Panel plugs are only for use in individual holes or with AML61 mounting hardware in multi-station strips. (Use dummy hous- ings in strip cutouts without AML61 mounting hardware.) PANEL PLUG ORDER GUIDE Plug Type Catalog Listing Square AML78CB Rectangular AML78FB AML78 DUMMY HOUSINGS Dummy housings can be used to provide for expansion needs in strip cutouts with- out AML61 mounting hardware. They have mounting clips, but there is no provi- sion for switching or illumination. DUMMY HOUSING ORDER GUIDE Catalog Dummy Housing Type* Listing Square AML78C100 (Pushbutton style) Rectangular AML78F100 (Pushbutton style) Rectangular AML78J100 (Lens indicator style) * Order AML51 Buttons/lenses for use with dummy housings. Manuals