AMH EATON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

  • Small size for high current applications
  • 125 Vdc voltage rating
  • Ceramic body with bolt in terminal design
  • UL recognized

Applications

  • High current wire protection
  • Vehicle power distribution
  • Material handling systems
  • Aircraft power distribution
  • All supercapacitor and battery systems
  • High current wire protection Agency information
  • cURus recognized file: E91958, guide JFHR2 and JFHR8 Environmental compliance HALOGEN HFFREE BK-AMH-xxx Packaging code Family name Rated current (Amps) Ordering part number Pb Packaging code BK - 30 parts per tray Blank - 1 part per polybag, 10 parts per inner box

www.eaton.com/electronicsElectrical characteristics Amp rating 1.0 In 3.0 In 350 - 500 4 hours minimum < 10 seconds Product specifications Typical cold resistance Part number Rated current (A) Voltage rating (Vdc) Breaking capacity1 (mOhms)2 AMH-350 350 125 16 kA @ 125 Vdc 20 KA @ 125 Vdc* 0.14 AMH-400 400 125 16 kA @ 125 Vdc 20 KA @ 125 Vdc* 0.125 AMH-500 500 125 16 kA @ 125 Vdc 20 KA @ 125 Vdc* 0.104 1. Self-certified for 20 kA @ 125 Vdc, TC < 2 ms 2. Cold resistance is measured at <10% rated current Dimensions- mm Drawing not to scale Part number Dimension A (mm) AMH-XXX 39 +/- 0.3 Recommended torque: M8: 12+/-1 N∙m. Marking detail Part number Marking on body AMH-350 BUSS AMH-350 350 A

125 Vdc

www.eaton.com/electronics General specifications Item Standrd/Specification Conditions Acceptable value/range Operating temperature -40 °C to +105 °C with proper derating Strength of terminals JASO D622 ISO8820-8 mounting torque 12+/-1 Nm, 3 times Resistance change <10% Temperature rise JASO D622 ISO8820-8 0.5 In, 40 min not exceed 50 K Temperature humidity cycling JASO D622 ISO8820-8 a) maintain the samples at standard conditions for 4 h; b) increase T to 55+/-2 °C at 95% to 99% RH within 0.5 h; c) maintain T at 55+/-2 °C at 95% to 99% RH for 10 h; d) decrease T to -40+/-2 °C within 2.5 h; the humidity is uncontrolled; e) maintain T at -40+/-2 °C for 2 h; the humidity is uncontrolled; f) increase T to 120+/-2 °C within 1.5 h from -40+/-2 °C; the humidity is uncontrolled; g) maintain T at 120+/-2 °C for 2 h; the humidity is uncontrolled; h) allow to return to RT within 1.5 h; the humidity is uncontrolled; 10 cycles. Resistance change <10%, electrical performance within spec Thermal shock JASO D622 ISO8820-8 (reference) b) 15 sec dwell time; d) 15 sec dwell time; 48 cycles. Resistance change <10%, electrical performance within spec Vibration UL248-20 IEC 60068-2-64 Random vibration. Condition C: rms 30.2 m/s2, 3 directions, 8 hrs each. Resistance change <10%, electrical performance within spec Transient current cycling JASO D622 ISO8820-8 (reference) 23+/-5 °C, each cycle current 2 In/0.25 sec, 0.5 In/5 sec, 50000 cycles. Resistance change <10%, electrical performance within spec Lubricant & fuel oil resistance GB/T31465.1-5.4 Wipe the marking with lubricant or oil 30 s Marking can be identified Breaking capacity Follow the spec IR > 0.1 Mohm, no explosion

www.eaton.com/electronics T emperature derating curve Current vs. time curve Derating factor T emperature (°C) Current (A) Time (seconds) I2T vs. time curve Time (seconds) I2t (A2s)

1000 Eaton Boulevard

Cleveland, OH 44122 United States Eaton.com/electronics © 2022 Eaton All Rights Reserved Printed in USA Publication No. ELX1217 BU-ELX22077 August 2022 Technical Data ELX1217 Effective August 2022 AMH Automotive bolt in fuse Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton is a registered trademark. All other trademarks are property of their respective owners. Follow us on social media to get the latest product and support information. I2t vs. current curve Current (A) I2t (A 2s)