AMER175-Z AIMTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

up to 3600mA | AC-DC LED driver www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R0 1 of 4 North America only FEATURES: Models Single output Model Max Output Power (W) Output Voltage Range (V) Output Current (mA) Input Voltage (VAC/Hz) Efficiency (%) AMER175-48360Z 172.8 15-48 3600 90-305/47-63 92.0 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity <75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Conditions Typical Maximum Units Input Current 90 VAC, full load  2.5 Arms Inrush current <2ms 115 VAC, cold start  40 A 305 VAC, cold start  65 Leakage current  0.75 mA Input dissipation No Load 3.0 W Output Short 5.0 W Power Factor 115 VAC, full load 0.98 277 VAC, full load 0.92 Input Fuse 5A/300V Start-up Time 115 VAC, full load 1.0 Sec. 277 VAC, full load 1.0 Sec. Output Specifications Parameters Conditions Typical Maximum Units Current accuracy ±5 % Line regulation LL to HL ±1 % Load regulation Full Output Voltage Range ±5 % Ripple & Noise 200 mV Output Current Ripple Full load 1.0 Io% Current Overshoot LL to HL, full load at cold start, % of rated output current 10 % Hold-up time (min.) 10 15 ms Minimum Load Voltage See Models Table Above Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage I/P – O/P 3750 VAC I/P – FG 2000 VAC O/P – FG 500 VAC Isolation Resistance I/P – O/P, 500Vdc >100MΩ Vdc Isolation Capacitance 3000 pF General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100 220 KHz Over voltage protection 63 V

  • Accurate Constant Current Output ±5% • IP65/IP67 design for indoor/outdoor
  • High Efficiency: Up to 92% • Over Temperature Protection
  • Active Power Factor Correction • Meet UL, CE Safety Requirement
  • UVLO, Short Circuit, Open Circuit, • 5 Year Warranty

up to 3600mA | AC-DC LED driver www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R0 2 of 4 North America only Short circuit protection Continuous current mode Short circuit restart Auto Recovery Open circuit protection Continuous voltage mode Over Temperature Protection Threshold – Shutdown Output +110 oC Hysteresis – Auto Recovery +85 oC Operating temperature Without Derating -40 to +70 oC Maximum case temperature 90 oC Storage temperature -40 to +85 oC Temperature coefficient 0.03 % / oC Cooling Free Air Convection Humidity 90 % RH Case material Metal (Aluminum) Potting material polysiloxane IP Rating IP67 Weight 1100 g MTBF >450,000 hrs (MIL-HDBK-217F at +25°C) Safety Specifications Parameters Standards Electromagnetic Interference EN55015 / FCC Part 15, Class B Harmonic Current Emissions EN61000-3-2, Class B Voltage fluctuations and flicker EN61000-3-3 Electrostatic Discharge Immunity EN61000-4-2, 8kV Air, 4kV Contact, Level 3, Criteria A RF, Electromagnetic Field Immunity EN61000-4-3, Test-RS Level 3, Criteria A Surge Immunity EN61000-4-5, Line to Neutral 4kV, Line/Neutral to FG 6kV RF, Conducted Disturbance Immunity EN61000-4-6. Test-CS Level 3, Criteria A Power frequency Magnetic Field Immunity EN61000-4-8, Test 3A/m, Criteria A Voltage dips, Short Interruptions Immunity EN61000-4-11, Criteria B Electromagnetic Immunity Requirements Applies to Lighting Equipment EN61547 Pin Definition Application circuit Input wire gauge #18 Output wire gauge #14 Wire Connection Brown AC L Blue AC N Yellow/Green FG Red +V Output Black -V OUtput AC_L AC_N LED+ LED- AC FG

up to 3600mA | AC-DC LED driver www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R0 3 of 4 North America only Dimensions Top View 214±0.5 8.46±0.02 320±20 12.60±0.79 5.0±1.0 0.20±0.04 35±2.0 1.38±0.08 30.3 1.19 7.30 0.29 4.00 0.16 7.40 0.29 4.00 0.16 4.00(0.16) 200.0±0.5 7.87±0.02 229.0±0.5 9.02±0.02 14.6 0.57 320.0±20.0 12.60±0.79 68.0 2.68 30.0±2.00 1.18±0.08 14.6 0.57 10.0±1.0 0.39±0.04 Side View Green Black White Black Red 200.0±0.50 7.87±0.02 229.0±0.5 9.02±0.02 38.8 1.53 Efficiency Vs. Input Voltage & Output Voltage (Constant current load) AMER175-48360Z 65.00% 70.00% 75.00% 80.00% 85.00% 90.00% 95.00% 15 18 21 24 27 30 33 36 39 42 45 48 Efficiency Output Voltage(V)

115 VAC

230 VAC

277 VAC

up to 3600mA | AC-DC LED driver www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R0 4 of 4 North America only PF vs. Input Voltage & Output Voltage (constant current mode) AMER175-48360Z NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels , may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary a nd may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control s ystems or other such applications which necessitate 0.000 0.300 0.600 0.900 1.200 15 18 21 24 27 30 33 36 39 42 45 48 PF Output Voltage(V)