AMER150-CAZ AIMTEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.E 1 of 10 North America only FEATURES: Models Single output Model Max Output Power (W) ① Output Voltage Range (V) ③ Output Current (A) ③ Input Voltage (VAC/Hz) Input Voltage (VDC) Mode of Operation Efficiency (%) AMER150-50300CAZ 150 36-50 0-3 90-305/47-440 120-430 Constant Current 91 Constant Voltage ② 90 AMER150-36420CAZ 150 24-36 0-4.16 90-305/47-440 120-430 Constant Current 90 Constant Voltage ② 88 AMER150-24630CAZ 151.2 12-24 0-6.3 90-305/47-440 120-430 Constant Current 89 Constant Voltage ② 87 Add Suffix “-F” No dimming option ① Exceeding the maximum output power will permanently damage the converter. ② The dimming feature is not supported when units are used in Constant Voltage mode only, Aimtec suggests to order “-F” No dimming option in this case. ③ In constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown. NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Conditions Typical Maximum Units Inrush current <2ms 115VAC 50 A 230VAC 75 Leakage current 115VAC 0.75 mA 230VAC 1 AC current 115VAC 2.2 A 230VAC 0.7 Power Factor 115VAC 0.98 230VAC 0.94 External fuse 250V/3.5A Start up time 900 ms Surge voltage 2sec 440 V Output Specifications Parameters Conditions Typical Maximum Units Current accuracy ±3 % Line regulation LL-HL ±1 % Load regulation 0-100% load ±3 % Ripple & Noise ④ 20MHz Bandwidth 100 mV p-p Hold-up time (min) 45 ms Current adjustment range 100-0 % Minimum Load Voltage See the models table ④ Tested with 0.1µF (C/C) or (M/C) and 47µF (E/C) parallel capacitors at the end. Constant Current or Constant Voltage LED Driver or Converter Over Voltage Protection Over Current Protection Input range 90-305VAC/47-440Hz Waterproof Case rated IP68 High Efficiency up to 91% Power Factor Correction 115VAC Operating temperature -50 to 80°C 230VAC Operating temperature -55 to 80°C Dimmable via analog / 0-10V dimming ② Short Circuit Protection
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.E 2 of 10 North America only Isolation Specifications Parameters Conditions Typical Maximum Units Tested I/P-O/P voltage 3sec 3750 VAC Tested I/P-FG voltage 3sec 1880 VAC Tested O/P-FG voltage 3sec 500 VAC Isolation Resistance 500VDC >1000 MΩ Isolation Capacitance 1000 pF General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100 KHz Over current protection 110% of Iout Over voltage protection 110% of Vout Short circuit protection Continuous Short circuit restart Auto recovery Over temperature protection >105°C Operating temperature (See Derating Table) (115VAC) -50 to +80 oC (230VAC) -55 to +80 oC Cold Start-up Time -55°C 20 Sec Maximum case temperature 100 oC Storage temperature -55 to +95 oC Temperature coefficient ±0.02 % / oC Cooling Free air convection Humidity 95 % RH Case material Aluminum Potting Epoxy (IP68 rated) Wires UL1015 18AWG Input & 14AWG Output *20CM Weight 750 g MTBF >400,000 hrs (MIL-HDBK-217F at +25°C) Safety Specifications Parameters Agency approvals CE Standards EN55022, class B, EN60529(IP68), EN61347-1, EN61347-2-13 NOTE: Also designed to Meet cULus, UL8750, UL60950-1
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.E 3 of 10 North America only Dimensions Analog (resistive) Dimming Application Circuit Model Number Maximum Pot Value (kΩ) AMER150-50300CAZ 16.71 AMER150-36420CAZ 26.70 AMER150-24630CAZ 11.47
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.E 4 of 10 North America only 0-10V Dimming Application Circuit R28 1K5, 0805 Derating Output Power (%) 230VAC
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.E 5 of 10 North America only Efficiency vs. Input Voltage & Output Current (CC mode) AMER150-50300CAZ AMER150-36420CAZ
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.E 6 of 10 North America only Efficiency vs. Input Voltage & Output Current (CC mode) Continued AMER150-24630CAZ PFC value vs. Output Load Current (CC mode) AMER150-50300CAZ
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.E 7 of 10 North America only PFC value vs. Output Load Current (CC mode) Continued AMER150-36420CAZ AMER150-24630CAZ
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.E 8 of 10 North America only Constant Current vs. Constant Voltage Mode AMER150-50300CAZ AMER150-36420CAZ
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.E 9 of 10 North America only Constant Current vs. Constant Voltage Mode Continued AMER150-24630CAZ Output Current vs. Radj AMER150-50300CAZ
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.E 10 of 10 North America only Output Current vs. Radj Continued AMER150-36420CAZ AMER150-24630CAZ NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate