AME10-3.3SBJZ AIMTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Preliminary Series AME10-BJZ

10 Watt | AC-DC / DC-DC Converter

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.A 1 of 3 North America only FEATURES: Picture coming soon Models Single output Model Input Voltage (VAC/Hz) Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum capacitive load (µF) Efficiency (%) 230 VAC AME10-3.3SBJZ 90-528/47-63 100-745 6.6 3.3 2 15,000 70 AME10-5SBJZ 90-528/47-63 100-745 10 5 2 15,000 74 AME10-9SBJZ 90-528/47-63 100-745 10 9 1.1 10,000 76 AME10-12SBJZ 90-528/47-63 100-745 10 12 0.9 5,000 78 AME10-15SBJZ 90-528/47-63 100-745 10 15 0.7 3,000 78 AME10-24SBJZ 90-528/47-63 100-745 10 24 0.45 1,000 80 Input Specifications Parameters Conditions Typical Maximum Units Current (full load) 115 VAC 400 mA

230 VAC 230 mA

Inrush current <2ms (cold start) 115 VAC 25 A

230 VAC 40 A

Leakage current 230VAC/50Hz  0.25 mA External fuse Recommended slow blow type 3.15 A No load consumption 0.75 W Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy ±2 ±3 % Line regulation (LL-HL) ±0.5 % Load regulation 0-100% load ±1 % Ripple & Noise* 20MHz bandwidth 150 mV p-p Hold up time 230 VAC 35 ms *Tested as per the referenced Application Circuit. Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage Input to Output, 60 sec 4000 VAC Isolation resistance >1000 MΩ General Specifications Parameters Conditions Typical Maximum Units Switching frequency 65 KHz Over current protection 130 - 400 % of Iout Over voltage protection Zener Diode Clamp Short circuit protection Continuous, Hiccup, Auto recovery Operating temperature See derating curve -40 to +70 °C Maximum case temperature 100 °C Storage temperature -40 to +85 °C Temperature coefficient ±0.02 % / °C Cooling Free air convection Humidity Non condensing 95 % RH

  • Input: 90-528VAC, 47-63Hz, or 100-745VDC • Class II power supply
  • Operating Temp: -40°C to +70°C • Over Voltage Protection
  • Over current Protection
  • I/O Isolation of 4000VAC
  • Up to 80% efficiency
  • Short Circuit Protection Click on Series name for product info on aimtec.com

Preliminary Series AME10-BJZ www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.A 2 of 3 North America only Case material Plastic (flammability to UL 94V-0) Weight 120 g MTBF > 300 000 hrs (MIL-HDBK -217F, t=+25oC)/ Full Load NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage (115/230VAC) and at rated output load unless otherwise specified. Safety Specifications Parameters Standards Information Technology Equipment Designed to meet IEC/EN/UL 62368-1 EMI - Conducted and radiated emission EN55032, class B Electrostatic Discharge Immunity IEC 61000-4-2: Contact ±6KV/Air ±8KV, Criteria B RF, Electromagnetic Field Immunity IEC 61000-4-3: 10V/m, Criteria A Electrical Fast Transient/Burst Immunity IEC 61000-4-4: ±4KV, Criteria B Surge Immunity* IEC 61000-4-5: line to line: ±2KV, Criteria B RF, Conducted Disturbance Immunity IEC 61000-4-6: 10Vrms, Criteria A Voltage dips, Short Interruptions Immunity IEC 61000-4-11: 0-70%, Criteria B * For higher values, external circuit would be required. Typical Application circuit AC DC AC L AC N + Vout - Vout Single Output MOV S20K625 FUSE 3.15A/300V 1µF/50V AC L AC N + Vout - Vout + TVS Dimensions Pin Out Specifications * Note: Input Pins 1 and 2 can be “N” and "L" respectively when the input voltage is supplied from a single phase. Input Pins 1 and 2 can be “L1” and "L2" respectively when the input voltage is supplied from 3 phase line to line voltage 208-480Vac (208 Y/ 120V 3-phase, 240 Y/ 120V 3-phase, 400 Y/ 230V 3-phase or 480 Y/ 277V 3-phase). Vout C2 TVS 3.3 & 5V 330 µF/50V 7A 220 µF/50V 12A 12V 20A 15 & 24V 30A Pin Single 1* AC Input (N) or (L1) 2* AC Input (L) or (L2) 3 - V output 4 + V output 62.00 (2.44) 45.00 (1.77) Bottom View1 4.00 (0.16) 54.00 (2.13) 6.00 (0.24) 1.00 (0.04) 17.50 (0.69) 12.50 (0.49) 30.00 (1.18) Case Tolerance ±0.50 (±0.02) Pin Diameter 1.0 ± 0.10 (0.04 ± 0.004) Dimensions mm (inch) Ø 1.50 (Ø 0.06) DIV: 10.00 (0.40) Top View 20.00 (0.79) 5.00 (0.20)

Preliminary Series AME10-BJZ www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.A 3 of 3 North America only Derating NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are cons idered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear cont rol systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this da tasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. - 40 - 20 0 20 40 60 80 100 100 Safe Operating Area Output Power (%) Ambient Temperature º C Free Air Convection 55-10 70 (100) 110 (155) 528 (745) 100 Safe Operating Area Output Power (%) Free Air Convection at 25°C Input Voltage VAC (VDC) 480 (675)