AME10 AIMTEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
TO ORDER CALL 1-888-9-AIMTEC AC-DC CONVERTERS AME10 Series
- SWITCHING POWER MODULES FOR PCB MOUNTING
- FULLY ENCAPSULATED PLASTIC CASE
- REGULATED OUTPUT
- LOW RIPPLE & NOISE
- HIGH EFFICIENCY
- CE, cUL APPROVALS 10 watt encapsulated ac-dc converter ELECTRICAL SPECIFICATIONS All specifications valid at nominal Input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notification Model No. (Single Output) AME10-3.3S AME10-5S AME10-12S AME10-15S AME10-24S Max output wattage (W) 10W 10W 10W 10W 10W Frequency (Hz) 47 ... 440 Hz Current (Full Load) 200mA max. (115 V AC) / 130mA max. (230 V AC) Input Inrush Current (<2ms) 10 A max. (115 V AC) / 20 A max. (230V AC) Leakage Current 0.75mA max. External Fuse (recommended) 1.5 A slow blow type V oltage (VDC) 3.3V 5V 12V 15V 24V V oltage Accuracy ±2% Current (mA) max. 3000 2000 833 666 416 Line Regulation (typ.) ±0.3% Load Regulation (typ.) ±0.5% Output Minimum Load 4% 5% 5% 3% 5% Maximum Capacitive Load 470-23,000 mF depending on model Noise <0.5% V out +50mV max (Vp-p) Ripple <0.2% V out +40mV max (Vp-p) Efficiency 68% 71% 76% 76% 80% Hold-up Time 15 ms min. Switching Frequency 100 kHz Over Current Protection Hiccup technique, auto-recovery Protection Over V oltage Protection Zener diode clamp Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Input-Output (V AC) 3000V Isolation Input-FG (V AC) 1500V Outut-FG (V AC) 500V Operating Temperature -25°C ... +71°C Storage Temperature -40°C ... +85°C Environment Temperature Coefficient 0.02% / °C Humidity 95% RH MTBF >230,000 h @ 25°C (MIL-HDBK-217F) Case Material Plastic resin + Fiberglass (flammability to UL 94V-0)Physical Weight 100g Cooling Method Free air convection Safety Agency Approvals cUL, CE EMI (Conducted & Radiated Emission) EN 55022 class BEMC EMS (Noise Immunity) EN 50082-1
VISIT US AT WWW.AIMTEC.CA AC-DC CONVERTERS Continued on next page AME10 Series 10 watt encapsulated ac-dc converter ELECTRICAL SPECIFICATIONS All specifications valid at nominal Input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notification Model No. (Dual Output) AME10-5D AME10-12D AME10-15D Max output wattage (W) 10W 10W 10W Frequency (Hz) 47 ... 440 Hz Current (Full Load) 200mA max. (115 V AC) / 130mA max. (230 V AC) Input Inrush Current (<2ms) 10 A max. (115 V AC) / 20 A max. (230V AC) Leakage Current 0.75mA max. External Fuse (recommended) 1.5 A slow blow type V oltage (VDC) ±5V ±12V ±15V V oltage Accuracy ±2% Current (mA) max. ±800 ±380 ±300 Line Regulation (typ.) ±0.3% Load Regulation (typ.) ±0.5% Output Minimum Load 1% 3% 1% Maximum Capacitive Load 470-23,000 mF depending on model Noise <0.5% V out +50mV max (Vp-p) Ripple <0.2% V out +40mV max (Vp-p) Efficiency 72% 77% 77% Hold-up Time 15 ms min. Switching Frequency 100 kHz Over Current Protection Hiccup technique, auto-recovery Protection Over V oltage Protection Zener diode clamp Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Input-Output (V AC) 3000V Isolation Input-FG (V AC) 1500V Outut-FG (V AC) 500V Operating Temperature -25°C ... +71°C Storage Temperature -40°C ... +85°C Environment Temperature Coefficient 0.02% / °C Humidity 95% RH MTBF >230,000 h @ 25°C (MIL-HDBK-217F) Case Material Plastic resin + Fiberglass (flammability to UL 94V-0)Physical Weight 100g Cooling Method Free air convection Safety Agency Approvals cUL, CE EMI (Conducted & Radiated Emission) EN 55022 class BEMC EMS (Noise Immunity) EN 50082-1
TO ORDER CALL 1-888-9-AIMTEC AC-DC CONVERTERS AME10 Series OUTLINE DIMENSIONS & PIN CONNECTIONS MECHANICAL DIMENSION (Top View) DERATING BLOCK DIAGRAM Pin FG AC Input (N) AC Input (L) -DC Output Do not connect +DC Output FG AC Input (N) AC Input (L) -DC Output Common +DC Output Single Dual