AM-151 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • NOISE FIGURE: 5 dB (TYP.)
  • HIGH THIRD ORDER IP: +38 dBM (TYP.)
  • P1dB: +21 dBm (TYP.)

Description

The AM-151 amplifier uses a coupler feedback design with high intercept and compression points. The use of coupler feedback minimized noise figure and DC current in a high intercept amplifier. This amplifier is packaged a TO-8 package. Due to the internal power dissipation, the thermal rise is minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-151 is ideally suited for use where a high intercept high reliability amplifier is required. Product Image

Ordering Information

AM-151-PIN* TO-8-1 AMC-151- SMA SMA Connectorized Absolute Maximum Ratings Parameter Absolute Maximum Maximum Input Power +20 dBm DC Voltage +15.75 V Continuous Input Power +18 dBm Operating Temperature -55º to +85ºC Storage Temperature -65º to +125ºC *Heat Sinking: Operation at case temperature above +95oC is not recommended. Heat sinking adequate to dissipate 1.3 W must be provided in use. *Mounting kit part number AU00071 required for PCB application **SMA Connectorized part is not RoHs compliant.

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Cascadable Amplifier 10 to 500MHz Rev. V5 AM-151/AMC-151 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Outline Drawing: TO-8-1 * ∗ Dimensions in ( ) are in mm. Unless otherwise noted: .XXX = + .010” (.XX = + 0.25) Typical Performance Curves at +25°C Outline Drawing: SMA Connectorized * Gain WEIGHT (APPROX) 0.10 OUNCES 2.8 GRAMS WEIGHT (APPROX) 1.62 OUNCES 46 GRAMS DC IN RF IN RF OUT GND .150 (3.8) TYP. .300 (7.6) TYP. MIN MAX .220 (5.6) .220 (5.6) .450 (11.4) 4X Ø .018+/-.005 (0.46+/-0.13) Ø .50 (12.7+0.5) 1.344 (34.14) .562 (14.28) DC IN 2X CONNECTOR .750+/-.020 (19.05)+/-0.5 .375+/-.020 (9.53+/-0.51) 112-40 UNC-2B 20 .46 .12 2X 1.344 (34.14) 0.72 (17.07) .672 (17.1) 1.000 (25.4) Ø .457 (11.61)