AM-147 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- HIGH POWER OUTPUT: +21 dBm (TYP.)
- HIGH THIRD ORDER IP3: +33 dBm (TYP.)
- HIGH EFFICIENCY: 52 mA (TYP.) @ +15 Vdc
Description
M/A-COM’s AM-147 is a coupler feedback amplifier with high intercept and compression points. The use of coupler feedback minimizes noise figure and current in a high intercept amplifier. This amplifier is packaged in a TO-8 package. Due to the inter- nal power dissipation the thermal rise minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-147 is ideally suited for use where a high intercept, high reliability amplifier is required. Product Image
Ordering Information
AMC-147- SMA * Connectorized Absolute Maximum Ratings Parameter Absolute Maximum Storage Temperature -62ºC to +150ºC Case Temperature 125ºC DC Voltage +17 V Continuous Input Power +13 dBm Short Term Input power (1 minute max.) 100 mW Peak Power (3 µsec max.) 0.5 W “S” Series Burn-In Temperature (case) 125ºC Thermal Data: VCC = +15 VDC Parameter Rating Thermal Resistance θjc 143ºC/W Transistor Power Dissipation Pd 0.47 W Junction Temperature Rise Above Case Tjc 68ºC * Over temperature performance limits for part number AMC-147, guaranteed from 0oC to +50oC only. * SMA Connectorized part is not RoHs compliant.
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Cascadable Amplifier 10 to 500MHz Rev. V6 AM-147 / AMC-147 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. Typical Performance Curves at +25°C Outline Drawing: SMA Connectorized * Outline Drawing: TO-8-1