AMAX-2750SY ADVANTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Features
Max. 20 Mbps transfer rate Onboard terminal for direct wiring Easy installation with RJ45 phone jack and LED diagnostic LED indicator for each IO channel (switch by SW4) Selection of I/O-channel configuration (32-ch DI, 32-ch DO or 16/16-ch Digital I/O) 2,500 VRMS Isolation voltage Suitable for DIN-rail mounting Introduction The AMAX-2750SY series consists of digital slave modules for AMONet RS-485 that extend the digital I/O capacity. All the digital I/O slave extension modules are connected serially with a simple Cat.5 cable. This reduces wiring between driver and controller and is very suitable for highly integrated machine automation applications. High speed, scalability and cost-effectiveness ensures a solid solution for machine builders. There are 3 main types of digital I/O slave modules, 32-ch digital input, 32-ch digital output, and 16/16-ch digital input/output. With these slave modules, you can connect actuators/sensors directly with minimum hassle. You can access I/O points nearby or 100 meters away using simple and low-cost wiring, and the high speed of AMONet RS-485 makes it possible to scan 2,048 I/O channels in 1.04 ms. Specifications Isolated Digital Input Channels AMAX-2752SY: 32 (4 ports) AMAX-2756SY: 16 (2 ports) Input Type Dry contact Isolation Protection 2,500 VRMS Opto-Isolator Response 18 μs Input Resistance 1 kW @ 0.5 W Isolated Digital Output Channels AMAX-2754SY: 32 (4 ports) AMAX-2756SY: 16 (2 ports) Output Type Sink (NPN) (open collector Darlington transistors) Isolation Protection 2,500 V RMS Output Voltage 10 ~ 30 VDC Sink Current 150 mA/ea. for multiple-channel usage, total 1.1 A max. (1 port) General Bus Type AMONet RS-485 Certification CE, FCC Class A Connectors 2 x RJ45 and 2 x 40-pin wiring board Dimensions (L x W x H) 125 x 47.6 x 151 mm (4.9" x 1.8" x 5.9") Power Consumption AMAX-2752SY: 1.2 W typical, 5 W max. AMAX-2754SY: 1.2 W typical, 5 W max. AMAX-2756SY: 1.2 W typical, 5 W max. Power Input 24 V DC within 200 mA ripple Power Supply for DIO 10 ~ 30 VDC (Current < 2A) Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3) Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Ordering Information
AMAX-2752SY-AE 32-ch Isolated Digital Input AMONet Module AMAX-2754SY-AE 32-ch Isolated Digital Output AMONet Module AMAX-2756SY-AE 16/16-ch Isolated Digital I/O AMONet Module 32-ch Isolated Digital Input/Output Slave ModulesAMAX-2752SY AMAX-2754SY AMAX-2756SY RoHS COMPLIANT 2002/95/EC All product specifications are subject to change without notice Last updated : 19-Mar-2014