AMAX-2240_V01 ADVANTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
Max. 20 Mbps transfer rate Max. 6.5 MHz, 4-axis pulse output 28 bits counter for incremental encoder 2 ~ 4-axis linear interpolation 2-axis circular interpolation T-Curve and S-Curve velocity profiles support Change speed on-the-fly Easy installation with RJ45 phone jack and LED diagnostic Easy installation for servo or stepping motor driver Suitable for DIN-rail mounting Specifications Pulse Type Motion Control Motor Driver Support Pulse-type servo Number of Axis 4 Interpolation Linear and circular Max. Output Speed 6.5 Mpps Step Count Range ±134, 217, 728 Pulse Output Type OUT/DIR, CW/CCW, A/B phase Position Counter ±134, 217, 728 Home Modes 13 Velocity Profiles T-Curve, S-Curve Local I/O Machine Interfaces: EL+ x 4, EL- x 4, ORG x 4, SD x 4 Servo Driver Interfaces: ALM x 4, RDY x 4, SVON x 4, INP x 4, ERC x 4 Position Compare I/O: LTC x 4, CMP x 4 Encoder Interface Input Type A/B phase, CW/CCW Counts per Enc. Cycle x1, x2, x4 (AB phase only) Input Range Compatible with TIA/EIA-422 differential line driver I : ±20 mA, VOD : ±2 V/min Isolation Protection 2,500 V RMS Max. Input Frequency 2 MHz @ 5 V General Bus Type AMONet RS-485 Certification CE, FCC Class A Connectors AMAX-2242/J2S: 2 x RJ45 and 8 x 20-pin SCSI AMAX-2241/PMA & AMAX-2243/YS2: 4 x 50-pin SCSI Dimensions (L x W x H) 125 x 47.6 x 151 mm (4.9" x 1.8" x 5.9") Power Consumption 5 W @ 24 V typical Power Input 24 V DC within 200 mV ripple Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3) Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Ordering Information
AMAX-2241/PMA-AE 4-axis AMONet Motion Module for Panasonic MINAS A AMAX-2242/J2S-AE 4-axis AMONet Motion Module for Mitsubishi MR-J2S AMAX-2243/YS2-AE 4-axis AMONet Motion Module for Yaskawa Sigma-II Accessories PCL-10220M-2E 20-pin SCSI Cable, 2 m (for AMAX-2242/J2S) PCL-10150M-2E 50-pin SCSI Cable, 2 m (for AMAX-2241/PMA and AMAX-2243/YS2) ADAM-3940-AE 40-pin Flat Cable Wiring Board with LED Introduction AMAX-2240 series is used to increase the number of axes for an AMONet RS-485 decentralized motion control network. These extension slave modules connect serially by a simple and affordable Cat.5 LAN cable, reducing the wiring between driver and controller. This is very suitable for highly integrated machine automation applications. Please select cable 20-pin SCSI and plug this cable into the motor driver and motion slave module. AMAX-2241 AMAX-2243AMAX-2242 RoHS COMPLIANT 2002/95/EC All product specifications are subject to change without notice Last updated : 19-Mar-2014