AM9GH-Z AIMTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

9 Watt | DC-DC Converter

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R1 1 of 5 North America only FEATURES: Models Single Output Model Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) Input Current Full | No Load (mA) Capacitor Load (μF) Efficiency (%) AM9GH-2403SZ 9-36 3.3 2000 1600 335 9 2600 82 AM9GH-2405SZ 9-36 5 1600 1600 392 9 1300 85 AM9GH-2409SZ 9-36 9 1000 1600 436 9 800 88 AM9GH-2412SZ 9-36 12 750 1600 425 9 560 88 AM9GH-2415SZ 9-36 15 600 1600 421 9 560 89 AM9GH-2424SZ 9-36 24 375 1600 421 9 200 89 AM9GH-4803SZ 18-75 3.3 2000 1600 168 5 2600 82 AM9GH-4805SZ 18-75 5 1600 1600 196 5 1300 85 AM9GH-4809SZ 18-75 9 1000 1600 218 5 800 87 AM9GH-4812SZ 18-75 12 750 1600 211 5 560 88 AM9GH-4815SZ 18-75 15 600 1600 213 5 560 89 AM9GH-4824SZ 18-75 24 375 1600 213 5 200 89 Models Dual output Model Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) Input Current Full | No Load (mA) Capacitor Load (μF) Efficiency (%) AM9GH-2405DZ 9-36 ±5 ±800 1600 392 9 ±800 85 AM9GH-2412DZ 9-36 ±12 ±375 1600 426 9 ±390 88 AM9GH-2415DZ 9-36 ±15 ±300 1600 426 9 ±200 87 AM9GH-4805DZ 18-75 ±5 ±800 1600 196 5 ±800 85 AM9GH-4812DZ 18-75 ±12 ±375 1600 216 5 ±390 87 AM9GH-4815DZ 18-75 ±15 ±300 1600 216 5 ±200 87 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified Input Specifications Parameters Nominal Typical Maximum Units Voltage range 24 9-36 18-75 VDC Filter Capacitor Transient recovery time 250 µs Transient Response deviation 3.3 & 5 V output ±5 % Startup time 50 ms Absolute Maximum Rating 24 Vin

48 Vin

-0.7-50 -0.7-100 VDC Input Reflected Ripple Currernt 30 mA p-p On / Off Control ON – high impedance or open; OFF – 2-4mA input current through 1KΩ (standby 2.5mA max) Under Voltage lockout 24 9-7 18-14 VDC Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 1600 VDC

  • SIP8 Metal Case Package • Operating Temperature -40°C to +85°C
  • High Efficiency up to 89% • Continuous Short Circuit Protection
  • On / Off Control
  • Input Under Voltage Lockout
  • Input / Output Isolation 1600VDC
  • Wide 4:1 Input Range Click on Series name for product info on aimtec.com

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R1 2 of 5 North America only Case / Input or Output 60 sec 1000 VDC Resistance > 1000 MOhm Capacitance 50 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy ±1 % Cross Regulation (Dual) 1st output 25% to 100%, 2nd output 100% ±5 % Short Circuit protection Continuous Short Circuit restart Auto recovery Line voltage regulation LL~HL ±0.2 % Load voltage regulation (Single) 0-100% load, 3.3 Vin 0-100% load, others ±0.5 % Load voltage regulation (Dual) 0-100% load ±1 % Temperature coefficient ±0.02 %/oC Ripple & Noise* At 20MHz Bandwidth 75 mV p-p Transient recovery time 100% - 25% load, 25% load step change 250 µs Transient response deviation ±3 ±5 % *Measured with 1µF CC and 10µF EC. General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load, 24Vin models 100% load, 48Vin models 400 500 KHz Operating temperature Refer Derating Curve -40 to +85 oC Storage temperature -55 to +125 oC Max Case temperature +100 oC Cooling Free air convection Humidity 95 % Case material Copper Potting material Epoxy (UL94V-0 rated) Pin Material C5191R-H Solder coated Weight 7.3 g MTBF >900,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) Maximum soldering temperature 1.5mm from case for 10 sec max 260 oC Safety Specifications Parameters Standards EN55032 Class A, EN55024 (external class A circuit required) IEC61000-4-2, Perf. Criteria B IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria A (external EFT/Surge circuit required) IEC61000-4-5, Perf. Criteria A (external EFT/Surge circuit required) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A NOTE: designed to meet IEC 60950-1:2001

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R1 3 of 5 North America only Pin Out Specifications Dimensions Input Reflected Ripple Test Circuit Derating Control ON/OFF pin connection example: The voltage could be applied trough a limiting resistor. The converter is turned on when the external switching circuit is open. Pin 1600 VDC Single Dual 1 - V Input - V Input 2 + V Input + V Input

3 On/Off Control On/Off Control

8 N.C. - V Output PRINTED FACE 21.85 (0.86) 10.60 (0.42) 0.60 (0.02) 2.54 (0.10) 17.78 (0.70) 4.10 (0.16) 9.60 (0.38) 11.20 (0.44) 9.60 (0.38) 3.42 (0.14) 0.25 (0.01) 0.50 (0.02) 1.00 (0.04) 7.62 (0.30) 3.50 (0.14) 2.50 (0.10) Standoff 1 2 3 6 7 8 NOTE: All dimensions are in mm (inches) Pin pitch and length tolerance: ±0.35 (±0.014) Case tolerance: ±0.5 (±0.02) Standoff tolerance: ±0.1 (±0.004) Aimtec DC-DC Converter Lin 12µH Cin 47µF Test Point RL (Full Load) Vo+ Vo- * Tested at full load, and nominal input - 40 - 20 0 20 40 60 80 100 100 Safe Operating Area Output Power (%) Ambient Temperature º C Free Air Convection 60º C Others 50º C 3.3Vin Converter Pin 3 +Vin -Vin 2 – 4 mA Pin 1

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R1 4 of 5 North America only EFT/Surge Application circuit Vin C1 D1 24VDC 300µF/100V TVS, 3kW, 75V 48VDC TVS, 3kW, 120V Class A EMI, external filter Single output models Vin C1, C2, C3 C4, C5, C6 & C7 L1 L2 24VDC 10µF/35V 220pF/3KV 20µH 20µH 48VDC 4.7µF/100V 1000pF/3KV 132.8µH 10µH DC/DC Converter +Vin -Vin +Vout -Vout Load C1 D1 DC/DC Converter +V input -V input +V output Load -V output C3C2

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R1 5 of 5 North America only Dual output models 24Vin models Dual output models 48Vin models NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control s ystems or other such applications which necessitate Vin C1, C2, C3 C4, C5 & C6 L1 L2 C7 24VDC 10µF/35V 220pF/3KV 20µH 20µH 1000pF/3KV Vin C1, C2, C3 C4 & C6 L1 L2 C5 & C7 48VDC 4.7µF/100V 1000pF/3KV 132.8µH 10µH 220pF/3KV DC/DC Converter +V input -V input +V output Load -V output C3C2 Common Load DC/DC Converter +V input -V input +V output Load -V output C3C2 Common Load