AM8TW-I-Z_16 AIMTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

8 Watt | DC-DC Converter

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.F 1 of 3 North America only FEATURES: Models Single output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Max. Capacitive Load (µF) Ripple & Noise typ. Efficiency (%) AM8TW-2403SIZ 9-36 3.3 1400 2000 80mV p-p 76 AM8TW-2405SIZ 9-36 5 1500 2000 80mV p-p 82 AM8TW-2412SIZ 9-36 12 620 300 120mV p-p 84 AM8TW-2415SIZ 9-36 15 500 300 150mV p-p 84 AM8TW-4803SIZ 18-75 3.3 1400 2000 80mV p-p 76 AM8TW-4805SIZ 18-75 5 1500 2000 80mV p-p 82 AM8TW-4812SIZ 18-75 12 620 300 120mV p-p 84 AM8TW-4815SIZ 18-75 15 500 300 150mV p-p 84 AM8TW-11005SIZ 36-160 5 1400 2000 80mV p-p 80 AM8TW-11012SIZ 36-160 12 580 300 120mV p-p 80 AM8TW-11015SIZ 36-160 15 460 300 150mV p-p 81 AM8TW-11024SIZ 36-160 24 290 300 240mV p-p 81 Models Dual output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Max. Capacitive Load (µF) Ripple & Noise typ Efficiency (%) AM8TW-2405DIZ 9-36 ±5 ±750 2000 80mV p-p 82 AM8TW-2412DIZ 9-36 ±12 ±310 300 120mV p-p 84 AM8TW-2415DIZ 9-36 ±15 ±250 300 150mV p-p 84 AM8TW-4805DIZ 18-75 ±5 ±750 2000 80mV p-p 82 AM8TW-4812DIZ 18-75 ±12 ±310 300 120mV p-p 84 AM8TW-4815DIZ 18-75 ±15 ±250 300 150mV p-p 83 AM8TW-11005DIZ 36-160 ±5 ±750 2000 80mV p-p 75 AM8TW-11012DIZ 36-160 ±12 ±310 300 120mV p-p 81 AM8TW-11015DIZ 36-160 ±15 ±250 300 150mV p-p 82 Input Specifications Parameters Conditions Typical Maximum Units Voltage range 110 9-36 18-75 36-160 VDC Filter π (Pi) Network Absolute Maximum Rating 24 Vin

48 Vin

83 VDC

Permissible absolute maximum duration 2 h Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 1500 VDC Resistance > 1000 MOhm Capacitance 1000 pF

  • RoHS compliant • Operating temperature -40oC to + 75oC
  • 24 Pin DIP Package • Regulated output
  • Wide 4:1 input range • Low ripple and noise
  • Power modules for PCB mounting
  • Over Voltage Protection
  • Input/Output Isolation voltage 1500VDC
  • Continuos Short Circuit Protection Click on Series name for product info on aimtec.com

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.F 2 of 3 North America only Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy ±2 % Short Circuit protection Continuous Short Circuit restart Auto recovery Over voltage protection Zener diode clamp Over load protection Over 110% full load with auto recovery Line voltage regulation (Single) HL-LL ±0.5 % Line voltage regulation (Dual) HL-LL ±0.5 % Load voltage regulation (Single) 10-100% ±0.5 % Load voltage regulation (Dual) 10-100% ±2 % Temperature coefficient ±0.05 %/ oC General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 300 KHz Operating temperature Derating above 70 -40 to +75 oC Storage temperature -55 to +115 oC Max Case temperature 95 oC Derating Above 70 oC Cooling Free air convection Humidity 95 % Case material Nickel coated copper Weight 16 g MTBF > 800 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Standards Agency approvals CE Safety EN 55022: 2006 + A1: 2007 EN 55024: 1998 + A1:2001 + A2:2003 IEC 61000-4-2: 2008 IEC 61000-4-3: 2006 + A1: 2007 IEC 61000-4-4: 2004 IEC 61000-4-6: 2008 IEC 61000-4-8: 2009

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.F 3 of 3 North America only Pin Out Specifications Dimensions Derating NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate Pin Single Dual 2 -V Input -V Input 3 -V Input -V Input 9 N.C. Common

10 Omitted Omitted

11 N.C. -V Output 14 +V Output +V Output

15 Omitted Omitted

  • 40 - 20 0 20 40 60 80 100 100 Safe Operating Area Output Power (%) Ambient Temperature º C A B C D B

100 LFM

A Free Air 70º C 75 º C C

200 LFM

80º C D

400 LFM

85 º C