AM8T-Z AIMTEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
8 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.G 1 of 3 North America only FEATURES: Models Single output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Capacitive load (μF) Efficiency (%) AM8T-1203SZ 9-18 3.3 2000 3300 80 AM8T-1205SZ 9-18 5 1500 2200 82 AM8T-1212SZ 9-18 12 665 470 85 AM8T-1215SZ 9-18 15 535 220 83 AM8T-2403SZ 18-36 3.3 2000 3300 80 AM8T-2405SZ 18-36 5 1500 2200 82 AM8T-2412SZ 18-36 12 665 470 85 AM8T-2415SZ 18-36 15 535 220 84 AM8T-4803SZ 36-72 3.3 2000 3300 80 AM8T-4805SZ 36-72 5 1500 2200 82 AM8T-4812SZ 36-72 12 665 470 84 AM8T-4815SZ 36-72 15 535 220 84 Models Dual output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Capacitive load (μF) Efficiency (%) AM8T-1205DZ 9-18 ±5 ±800 ±1000 82 AM8T-1212DZ 9-18 ±12 ±335 ±220 84 AM8T-1215DZ 9-18 ±15 ±265 ±100 84 AM8T-2405DZ 18-36 ±5 ±800 ±1000 82 AM8T-2412DZ 18-36 ±12 ±335 ±220 83 AM8T-2415DZ 18-36 ±15 ±265 ±100 85 AM8T-4805DZ 36-72 ±5 ±800 ±1000 82 AM8T-4812DZ 36-72 ±12 ±335 ±220 85 AM8T-4815DZ 36-72 ±15 ±265 ±100 85 Input Specifications Parameters Nominal Typical Maximum Units Voltage range 12 9-18 VDC 24 18-36 48 36-72 Filter (Pi) Network Turn on Transient process time 350 ms Start up time 20 ms Absolute Maximum Rating 12 Vin -0.7-24 VDC 24 Vin -0.7-40 48 Vin -0.7-100 Peak Input Voltage time 100 ms RoHS compliant Operating temperature -40 oC to + 85oC 24 Pin DIP Package Continuous Short Circuit Protection Wide 2:1 input range Low ripple and noise Efficiency up to 85% Input/output Isolation voltage 1500VDC
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.G 2 of 3 North America only Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3 sec 1500 VDC Case/input & Output 1000 VDC Resistance > 1000 MOhm Capacitance 1000 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy ±1 % Voltage balance (Dual output model) Balanced Load ±1 % Short Circuit protection Continuous Short Circuit restart Auto recovery Current Limiting 140 % of Iout max Line voltage regulation HL-LL ±0.5 % Load voltage regulation 10% to 100% load ±0.5 % Temperature coefficient ±0.02 %/ oC Rising time 10 ms Ripple and Noise 75 mVp-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 330 KHz Operating temperature With Derating above 55°C -40 to +85 oC Storage temperature -40 to +125 oC Max Case temperature +100 oC Cooling Free air convection Humidity 95 % Case material Nickel coated cooper Weight 17 g MTBF >1 121 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency Approval CE Standards IEC 60950-1:2005 (2nd Edition); EN 60950-1:2006 EN55022 Class A, EN55024 IEC61000-4-2, Perf. Criteria B IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-5, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.G 3 of 3 North America only Pin Out Specifications Dimensions (Bottom view) 20.30 (0.80) 10.20 (0.40) 3.05 (0.12) 15.24 (0.60) Derating Test Circuits Conducted Emissions: NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate Pin Single Dual 2 -V Input -V Input 3 -V Input -V Input
9 No pin Common
11 N.C. -V Output 14 +V Output + V Output 16 -V Output Common 22 +V Input +V Input 23 +V Input +V Input