AM40-0023 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- 0.7 dB Typical Noise Figure
- 14 dB Typical Gain
- DC Decoupled RF Input and Output
- Single Bias Configuration
- SMT Construction
- Dual Channels for Balanced Designs
- Unconditionally Stable—No External Matching Circuit required
Description
M/A-COM’s AM40-0023 is a dual-channel, ultra low noise amplifier in a surface mount package. Very low noise figure is achieved by using discrete pHEMT devices combined with M/A-COM’s glass technology. The AM40-0023 is designed specifically for use in DCS-1800 and PCS telecommunication applications where less than 1 dB noise figure is required. CR-5 Electrical Specifications: Bias Conditions: +7V @ 20 mA Typical (each channel,) TA = +25°C, Z0 = 50 Ohms Parameter Test Conditions Frequency Units Min. Typ. Max. Gain PIN = -20 dBm 1.710-1.910 GHz dB 11 14 — Gain Flatness PIN = -20 dBm 1.710-1.910 GHz dB — ± 1.0 ± 1.5 Noise Figure — 1.710-1.910 GHz dB — 0.7 0.9 VSWR Input PIN = -20 dBm 1.710-1.910 GHz Ratio — 2.0:1 3.0:1 VSWR Output PIN = -20 dBm 1.710-1.910 GHz Ratio — 2.0:1 3.0:1 1 dB Compression Input Power 1.710-1.910 GHz dBm -13 -9 — Reverse Isolation — 1.710-1.910 GHz dB 20 25 — Input Third Order Intercept — 1.710-1.910 GHz dBm 0 3 —
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Ultra Low Noise pHEMT Dual Channel Amplifier, 1.710-1.910 GHz Rev. V3 AM40-0023 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves
Ordering Information
AM40-0023 PIN CR-5 1. Operation of this device above any one of these parameters may cause permanent damage. 2. Ambient Temperature (TA) = +25°C Absolute Maximum Ratings 1 Parameter Absolute Maximum Max. Input Power 2 +15 dBm Operating Voltage 2 +10.0 V Operating Temperature -55°C to +125°C Storage Temperature -65°C to +150°C 1 700 1 750 1 800 1 850 1 900 1 950 2000 Frequency (M Hz) Gain vs. Frequency 0.0 0.2 0.4 0.6 0.8 1. 0 1 700 1 750 1 800 1 850 1 900 1 950 2000 Frequency (M Hz) Noise Figure vs. Frequency Input & Output Return Loss -20 -1 5 -1 0 1 700 1 750 1 800 1 850 1 900 1 950 2000 Frequency (M Hz) RF INRF OUT Functional Schematic (Top View) GND 10RF OUTB VDDB N/C RF INB GND RF INA N/C VDDA RF OUTA