DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

3 Watt | DC-DC Converter

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.E 1 of 5 North America only FEATURES: Models Single output Model Input Voltage (V) Output Voltage(V) Output Current max (mA) Isolation (VDC) Capacitor Load (μF) Efficiency (%) AM3G-0505S-NZ 4.5-9 5 500 1500 2200 73 AM3G-0509S-NZ 4.5-9 9 278 1500 1000 74 AM3G-0512S-NZ 4.5-9 12 208 1500 680 77 AM3G-0515S-NZ 4.5-9 15 167 1500 470 74 AM3G-1203S-NZ 9-18 3.3 758 1500 2700 75 AM3G-1205S-NZ 9-18 5 600 1500 2200 76 AM3G-1209S-NZ 9-18 9 333 1500 1000 79 AM3G-1212S-NZ 9-18 12 250 1500 680 82 AM3G-1215S-NZ 9-18 15 200 1500 470 83 AM3G-1224S-NZ 9-18 24 125 1500 330 81 AM3G-2403S-NZ 18-36 3.3 758 1500 2700 74 AM3G-2405S-NZ 18-36 5 600 1500 2200 81 AM3G-2409S-NZ 18-36 9 333 1500 1000 83 AM3G-2412S-NZ 18-36 12 250 1500 680 83 AM3G-2415S-NZ 18-36 15 200 1500 470 83 AM3G-2424S-NZ 18-36 24 125 1500 330 83 AM3G-4803S-NZ 36-75 3.3 758 1500 2700 75 AM3G-4805S-NZ 36-75 5 600 1500 2200 76 AM3G-4812S-NZ 36-75 12 250 1500 680 80 AM3G-4815S-NZ 36-75 15 200 1500 470 84 AM3G-4824S-NZ 36-75 24 125 1500 330 82 AM3G-0505SH30-NZ 4.5-9 5 500 3000 2200 73 AM3G-0509SH30-NZ 4.5-9 9 278 3000 1000 74 AM3G-0512SH30-NZ 4.5-9 12 208 3000 680 77 AM3G-0515SH30-NZ 4.5-9 15 167 3000 470 74 AM3G-1203SH30-NZ 9-18 3.3 758 3000 2700 75 AM3G-1205SH30-NZ 9-18 5 600 3000 2200 76 AM3G-1209SH30-NZ 9-18 9 333 3000 1000 79 AM3G-1212SH30-NZ 9-18 12 250 3000 680 82 AM3G-1215SH30-NZ 9-18 15 200 3000 470 83 AM3G-1224SH30-NZ 9-18 24 125 3000 330 81 AM3G-2403SH30-NZ 18-36 3.3 758 3000 2700 74 AM3G-2405SH30-NZ 18-36 5 600 3000 2200 81 AM3G-2409SH30-NZ 18-36 9 333 3000 1000 83 AM3G-2412SH30-NZ 18-36 12 250 3000 680 83 AM3G-2415SH30-NZ 18-36 15 200 3000 470 83 AM3G-2424SH30-NZ 18-36 24 125 3000 330 83 AM3G-4803SH30-NZ 36-75 3.3 758 3000 2700 75 AM3G-4805SH30-NZ 36-75 5 600 3000 2000 76 AM3G-4812SH30-NZ 36-75 12 250 3000 680 80 AM3G-4815SH30-NZ 36-75 15 200 3000 470 84  1500 and 3000VDC I/O Isolation  Operating temperature -40 oC to 100oC  Very low no load consumption  Continuous Short circuit protection  Remote On/Off Control  Wide 2:1 input range  8 pin SIP package  High efficiency up to 84% Click on Series name for product info on aimtec.com

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.E 2 of 5 North America only Models Dual output Model Input Voltage (V) Output Voltage(V) Output Current max (mA) Isolation (VDC) Capacitor Load (μF) Efficiency (%) AM3G-0505D-NZ 4.5-9 ±5 ±250 1500 ±1000 74 AM3G-0512D-NZ 4.5-9 ±12 ±104 1500 ±470 77 AM3G-0515D-NZ 4.5-9 ±15 ±83 1500 ±330 77 AM3G-1205D-NZ 9-18 ±5 ±300 1500 ±1000 78 AM3G-1209D-NZ 9-18 ±9 ±167 1500 ±680 79 AM3G-1212D-NZ 9-18 ±12 ±125 1500 ±470 80 AM3G-1215D-NZ 9-18 ±15 ±100 1500 ±330 80 AM3G-2405D-NZ 18-36 ±5 ±300 1500 ±1000 78 AM3G-2409D-NZ 18-36 ±9 ±167 1500 ±680 81 AM3G-2412D-NZ 18-36 ±12 ±125 1500 ±470 83 AM3G-2415D-NZ 18-36 ±15 ±100 1500 ±330 83 AM3G-4805D-NZ 36-75 ±5 ±300 1500 ±680 80 AM3G-4812D-NZ 36-75 ±12 ±125 1500 ±470 82 AM3G-4815D-NZ 36-75 ±15 ±100 1500 ±330 82 AM3G-0505DH30-NZ 4.5-9 ±5 ±250 3000 ±1000 74 AM3G-0512DH30-NZ 4.5-9 ±12 ±104 3000 ±470 77 AM3G-0515DH30-NZ 4.5-9 ±15 ±83 3000 ±330 77 AM3G-1205DH30-NZ 9-18 ±5 ±300 3000 ±1000 78 AM3G-1212DH30-NZ 9-18 ±12 ±125 3000 ±470 79 AM3G-1215DH30-NZ 9-18 ±15 ±100 3000 ±330 80 AM3G-2405DH30-NZ 18-36 ±5 ±300 3000 ±1000 79 AM3G-2409DH30-NZ 18-36 ±9 ±167 3000 ±680 81 AM3G-2412DH30-NZ 18-36 ±12 ±125 3000 ±470 83 AM3G-2415DH30-NZ 18-36 ±15 ±100 3000 ±330 83 AM3G-4805DH30-NZ 36-75 ±5 ±300 3000 ±1000 79 AM3G-4812DH30-NZ 36-75 ±12 ±125 3000 ±470 82 AM3G-4815DH30-NZ 36-75 ±15 ±100 3000 ±330 82 Input Specifications Parameters Nominal Typical Maximum Units Voltage range 4.5-9 9-18 18-36 36-75 VDC Filter Capacitor Maximum Rating

5 Vin

12 Vin

24 Vin

48 Vin

Peak Input Voltage time 1 sec No load input current Input Reflected Ripple Current On/Off Control* ON – open or Isolat ed; OFF – high (current 5-10mA) *Note: Exceeding 20mA of control current will permanently damage the converter.

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.E 3 of 5 North America only Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60sec, <1mA 1500, 3000 VDC Resistance > 1000 MOhm Capacitance 100kHz, 1V 50 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 5 to 100% load ±2 % No Load Voltage accuracy ±5 Voltage balance Dual Output balanced load ±1 % Short Circuit Protection Continuous Short Circuit Restart Auto-recovery Line voltage regulation LL~HL ±0.5 % Load voltage regulation load 5~100% ±0.6 % Temperature coefficient ±0.02 %/oC Transient Recovery Time 25% load step 2 msec Transient Response Deviation 25% load step ±5 % Ripple At 20MHz Bandwidth 50 mV p-p Noise At 20MHz Bandwidth 80 mV p-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 250 KHz Operating temperature With derating above 85oC -40 to +100 oC Storage temperature -55 to +125 oC Case Temperature 105 oC Lead Temperature 1.5mm from case for 10 Seconds 300 oC Cooling Free air convection Humidity 95 % Case material Plastic (UL94V-0 rated) Weight 4.9 g Dimensions (L x Wx H) 0.87 x 0.37 x 0.47 inch, 22 x 9.5 x 12 mm MTBF >1 000 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Pin Out Specifications Dimensions Pin Single Dual 1 - V Input - V Input 2 + V Input + V Input

3 On/Off Control On/Off Control

5 N.C. N.C. 6 + V Output + V Output 7 - V Output Common

8 CS - V Output

2.50 (0.98) 12.00 (0.47) 22.00 (0.87) 0.50 (0.02) 0.50 (0.02) 4.10 (0.16) 2.54 (0.10) 2.10 (0.08) 123 5 6 7 9.50 (0.37) 0.300 (0.012) 0.50 (0.02) 9.50 (0.37)PRINTED FACE 12.00 (0.47)

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.E 4 of 5 North America only Derating Free Air Convection -4 0 -2 0 0 2 04 0 6 08 0 100 100 Safe Operating Area Output Power (%) Ambient Temperature º C 85 Cº 105 Recommended EMC Circuit Load Model C1, C2 C4 LDM MOV TVS C3 LDM2 Cd D1 R1 5 Vin 4.7µF / 50V 1nF /3KV 12 µH - SMCJ13A 680µF / 16V - 47nF /100V RB160M-60/1A See Formula 12 Vin 4.7µF / 50V 1nF /3KV 12 µH - SMCJ28A 680µF / 25V - 47nF /100V RB160M-60/1A See Formula 24 Vin 4.7µF / 50V 1nF /3KV 12 µH S14K35 SM CJ48A 330µF / 50V 56µH 47nF /100V RB160M-60/1A See Formula 48 Vin 4.7µF / 100V 1nF /3KV 12 µH S14K60 SMCJ90A 330µF / 100V 56µH 47nF /100V RB160M-60/1A See Formula Note: Fuse is user selectable R1 = ((Vcd – Vd1 – 1.0) / Icntl) ‐ 300

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.E 5 of 5 North America only Recommended Circuits DC DC + Vin ‐Vin LDM +Vout ‐Vout Single Output C1 C2 CNTL R1D1 2 6 Cout Cs DC DC + Vin ‐Vin LDM +Vout ‐Vout Dual Output C1 C2 CNTL R1D1 2 6 Cout Cout GND LDM1 LDM1 Model C1 C2 LDM C3 D1 R1 LDM1 CS Cout 5 Vin 100µF 47µF 4.7 - 12 µH 47µF / 100V RB160M-60/1A See Formula 2.2 - 10 µH 10 - 22µF 100µF 12 Vin 100µF 47µF 4.7 - 12 µH 47µF / 100V RB160M-60/1A See Formula 2.2 - 10 µH 10 - 22µF 100µF 24 Vin 10µF 1µF 4.7 - 12 µH 47µF / 100V RB160M- 60/1A See Formula 2.2 - 10µH 10 - 22µF 100µF 48 Vin 10µF 1µF 4.7 - 12 µH 47µF / 100V RB160M-60/1A See Formula 2.2 - 10 µH 10 - 22µF 100µF R1 = ((Vcd – Vd1 – 1.0) / Icntl) – 300 NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate