AM2N-N AIMTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

VISIT US AT WWW.AIMTEC.CA AM2N-N Series

  • 24-PIN DIP PACKAGE
  • HIGH EFFICIENCY UP TO 85%
  • LOW PROFILE PLASTIC PACKAGE
  • INPUT/OUTPUT ISOLATION: 6000VDC
  • OPERATING TEMPERATURE: -40°C ... +85°C
  • PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS ELECTRICAL SPECIFICATIONS Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified Physical Specifications: Dimensions 32.3x14.7x9.4mm 1.27x0.58x0.37inches Weight 16g Case material Plastic UL94-VO MTBF: > 1,000,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC) Specifications are subject to change without notification Isolation Specifications: Rated voltage (60 sec) 6000VDC Resistance > 1000MOhm Output Specifications: V oltage accuracy See tolerance envelope graph Ripple & noise (at 20MHz BW) 100mVp-p, typ. Short circuit protection 1 sec. Line voltage regulation ±1.2%/1% of Vin max. Load voltage regulation 15%, max. Temperature Coefficient ±0.03%/ºC, max. 2 watt dc-dc converters FunctionPin +V Input -V Input N.C. OV +V Output 8,17 10,15 12,13 FunctionPin +V Input -V Input -V Output OV +V Output 8,17 10,15 12,13 Single output Dual output GENERAL DESCRIPTION Our AM2N-N series is a family of cost effective 2W single and dual output DC-DC converters. These converters combine plastic package in a 24-pin DIP compatible case with high performance feature such as 6000VDC input/ output isolation voltage. Input voltages of 5, 12 & 24VDC with output voltages of 5, 9, 12, 15, ±5, ±9, ±12, ±15VDC. Full SMD-design and a 100% production test of parame- ters ensures a high reliability in this product. Input Specifications: V oltage range ±10% Filter Capacitor Environmental Specifications: Operating temperature (ambient) -40ºC ... +85ºC Storage temperature -55ºC ... +125ºC Case temperature +95°C, max. Derating None required Humidity (non-condensing) Up to 90% Cooling Free-air Convection General Specifications: Efficiency 72% to 81% Switching Frequency 35KHz, typ. 100% load DC-DC CONVERTERS OUTLINE DIMENSIONS & PIN CONNECTIONS Series Continued on next page

TO ORDER CALL 1-888-9-AIMTEC AM2N-N Series DC-DC CONVERTERS MODELS Single output Models Input Voltage Ouput Voltage Ouput Current max. AM2N-0505SH60-N AM2N-0509SH60-N AM2N-0512SH60-N AM2N-0515SH60-N AM2N-1205SH60-N AM2N-1209SH60-N AM2N-1212SH60-N AM2N-1215SH60-N AM2N-2405SH60-N AM2N-2409SH60-N AM2N-2412SH60-N AM2N-2415SH60-N 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC 400mA 222mA 167mA 133mA 400mA 222mA 167mA 133mA 400mA 222mA 167mA 133mA 5V ± 10% 12V ± 10% 24V ± 10% Dual output Models Input Voltage Ouput Voltage Ouput Current max. AM2N-0505DH60-N AM2N-0509DH60-N AM2N-0512DH60-N AM2N-0515DH60-N AM2N-1205DH60-N AM2N-1209DH60-N AM2N-1212DH60-N AM2N-1215DH60-N AM2N-2405DH60-N AM2N-2409DH60-N AM2N-2412DH60-N AM2N-2415DH60-N 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC ±200mA ±110mA ±84mA ±67mA ±200mA ±110mA ±84mA ±67mA ±200mA ±110mA ±84mA ±67mA 5V ± 10% 12V ± 10% 24V ± 10% TYPICAL CHARACTERISTICS

VISIT US AT WWW.AIMTEC.CA AM2N-N Series DC-DC CONVERTERS APPLICATION NOTE For single output For dual output Overload Protection Under normal operating conditions, the output circuit of these products has no protection against over-current and short-circuits. The simplest method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit. Output Voltage Regulation and Over-voltage Protection Circuit The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage stabilizer with overheat protection that is connected to the input or output end in series (see Figure 2). External Capacitor Table for Single Output Vin Vout External Capacitor External Capacitor 4.7uF 2.2uF 1uF 5VDC 9VDC 12VDC 15VDC 10uF 4.7uF 2.2uF 1uF External Capacitor Table for Dual Output Vin Vout External Capacitor External Capacitor 5VDC 12VDC 24VDC 4.7uF 2.2uF 1uF 5VDC 9VDC 12VDC 15VDC 4.7uF 2.2uF 1uF 0.47uF Filtering In some circuits which are sensitive to noise and ripple, a filtering capacitor may be added to the dc/dc output end and input end to reduce the noise and ripple. However, the capacitance of the output filter capacitor must be proper. If the capacitance is too big, a startup proble m might arise. For every channel of output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter capacitor sees the external capacitor table. To get an extremely low ripple, an ìLCî filtering network may be connected to the input and output ends of the dc/dc converter, wh ich may produce a more significant filtering effect. It should also be noted that the inductance and the frequency of the ìLCî filtering network shoul d be staggered with the dc/dc frequency to avoid mutual interference (see figure 1). Requirement on output load To ensure this module can operate efficiently and reliably, a minimum load is specified for this kind of dc/dc converter in addition to a maximum load (namely full load). During operation, make sure the specified range of input voltage is not exceeded, the minimum output load is not less than 10% of the full load, and that this product should never be operated under no load! If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load. 5VDC 12VDC 24VDC