AM2M-0524DH30-NZ

AM2M-NZ AIMTEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

2 Watt | DC-DC Converter

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R13.B 1 of 6 North America only FEATURES:

• Continuous short-circuit protection • DIP 14 package
• Operating temperature: -40°C to +85°C • Isolation Voltage 1500 and 3000VDC
• High efficiency up to 85% • Low Isolation Capacitance Models Single output Model Input Voltage (V) Max Input Current Full/No Load (mA) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load(uF) Efficiency (%) AM2M-0303S-NZ 2.97-3.63 777/40 3.3 400 1500 220 70 AM2M-0305S-NZ 2.97-3.63 777/40 5 400 1500 220 74 AM2M-0503S-NZ 4.5-5.5 500/35 3.3 400 1500 220 74 AM2M-0505S-NZ 4.5-5.5 500/35 5 400 1500 220 80 AM2M-0509S-NZ 4.5-5.5 500/35 9 222 1500 220 84 AM2M-0512S-NZ 4.5-5.5 500/35 12 167 1500 220 84 AM2M-0515S-NZ 4.5-5.5 500/35 15 133 1500 220 84 AM2M-0524S-NZ 4.5-5.5 500/35 24 83 1500 220 84 AM2M-0915S-NZ 8.1-9.9 278/25 15 133 1500 220 83 AM2M-1205S-NZ 10.8-13.2 208/20 5 400 1500 220 80 AM2M-1209S-NZ 10.8-13.2 208/20 9 222 1500 220 83 AM2M-1212S-NZ 10.8-13.2 208/20 12 167 1500 220 82 AM2M-1215S-NZ 10.8-13.2 208/20 15 133 1500 220 84 AM2M-1224S-NZ 10.8-13.2 208/20 24 83 1500 220 84 AM2M-2405S-NZ 21.6-26.4 105/10 5 400 1500 220 79 AM2M-2409S-NZ 21.6-26.4 105/10 9 222 1500 220 85 AM2M-2412S-NZ 21.6-26.4 105/10 12 167 1500 220 83 AM2M-2415S-NZ 21.6-26.4 105/10 15 133 1500 220 84 AM2M-2424S-NZ 21.6-26.4 105/10 24 83 1500 220 84 AM2M-0505SH30-NZ 4.5-5.5 500/35 5 400 3000 220 80 AM2M-0509SH30-NZ 4.5-5.5 500/35 9 222 3000 220 84 AM2M-0512SH30-NZ 4.5-5.5 500/35 12 167 3000 220 84 AM2M-0515SH30-NZ 4.5-5.5 500/35 15 133 3000 220 84 AM2M-0524SH30-NZ 4.5-5.5 500/35 24 83 3000 220 84 AM2M-1205SH30-NZ 10.8-13.2 208/20 5 400 3000 220 80 AM2M-1212SH30-NZ 10.8-13.2 208/20 12 167 3000 220 82 AM2M-1215SH30-NZ 10.8-13.2 208/20 15 133 3000 220 84 AM2M-1224SH30-NZ 10.8-13.2 208/20 24 83 3000 220 85 AM2M-1505SH30-NZ 13.5-16.5 159/15 5 400 3000 220 80 AM2M-1509SH30-NZ 13.5-16.5 159/15 9 222 3000 220 84 AM2M-1515SH30-NZ 13.5-16.5 159/15 15 133 3000 220 82 AM2M-2405SH30-NZ 21.6-26.4 105/10 5 400 3000 220 80 AM2M-2409SH30-NZ 21.6-26.4 105/10 9 222 3000 220 85 AM2M-2412SH30-NZ 21.6-26.4 105/10 12 167 3000 220 83 AM2M-2415SH30-NZ 21.6-26.4 105/10 15 133 3000 220 84 AM2M-2424SH30-NZ 21.6-26.4 105/10 24 83 3000 220 85 Models Dual output Model Input Voltage (V) Max Input Current Full/No Load (mA) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load(uF) Efficiency (%) AM2M-0505D-NZ 4.5-5.5 500/35 ±5 ±200 1500 100 80 AM2M-0509D-NZ 4.5-5.5 500/35 ±9 ±111 1500 100 84 AM2M-0512D-NZ 4.5-5.5 500/35 ±12 ±83 1500 100 84 AM2M-0515D-NZ 4.5-5.5 500/35 ±15 ±67 1500 100 84

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R13.B 2 of 6 North America only AM2M-0524D-NZ 4.5-5.5 500/35 ±24 ±42 1500 100 84 AM2M-1205D-NZ 10.8-13.2 208/20 ±5 ±200 1500 100 80 AM2M-1209D-NZ 10.8-13.2 208/20 ±9 ±111 1500 100 84 AM2M-1212D-NZ 10.8-13.2 208/20 ±12 ±83 1500 100 83 AM2M-1215D-NZ 10.8-13.2 208/20 ±15 ±67 1500 100 84 AM2M-1224D-NZ 10.8-13.2 208/20 ±24 ±42 1500 100 84 AM2M-1515D-NZ 13.5-16.5 159/15 ±15 ±67 1500 100 84 AM2M-2405D-NZ 21.6-26.4 105/10 ±5 ±200 1500 100 79 AM2M-2409D-NZ 21.6-26.4 105/10 ±9 ±111 1500 100 84 AM2M-2412D-NZ 21.6-26.4 105/10 ±12 ±83 1500 100 83 AM2M-2415D-NZ 21.6-26.4 105/10 ±15 ±67 1500 100 84 AM2M-2424D-NZ 21.6-26.4 105/10 ±24 ±42 1500 100 84 AM2M-0505DH30-NZ 4.5-5.5 500/35 ±5 ±200 3000 100 80 AM2M-0509DH30-NZ 4.5-5.5 500/35 ±9 ±111 3000 100 84 AM2M-0512DH30-NZ 4.5-5.5 500/35 ±12 ±83 3000 100 84 AM2M-0515DH30-NZ 4.5-5.5 500/35 ±15 ±67 3000 100 84 AM2M-0524DH30-NZ 4.5-5.5 500/35 ±24 ±42 3000 100 84 AM2M-1205DH30-NZ 10.8-13.2 208/20 ±5 ±200 3000 100 80 AM2M-1209DH30-NZ 10.8-13.2 208/20 ±9 ±111 3000 100 80 AM2M-1212DH30-NZ 10.8-13.2 208/20 ±12 ±83 3000 100 83 AM2M-1215DH30-NZ 10.8-13.2 208/20 ±15 ±67 3000 100 85 AM2M-1224DH30-NZ 10.8-13.2 208/20 ±24 ±42 3000 100 85 AM2M-1509DH30-NZ 13.5-16.5 159/15 ±9 ±111 3000 100 84 AM2M-1515DH30-NZ 13.5-16.5 159/15 ±15 ±67 3000 100 84 AM2M-2405DH30-NZ 21.6-26.4 105/10 ±5 ±200 3000 100 79 AM2M-2412DH30-NZ 21.6-26.4 105/10 ±12 ±83 3000 100 83 AM2M-2415DH30-NZ 21.6-26.4 105/10 ±15 ±67 3000 100 84 AM2M-2424DH30-NZ 21.6-26.4 105/10 ±24 ±42 3000 100 84 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units Voltage range 3.3V 12V 15V 24V 2.97-3.63 4.5-5.5 8.1-9.9 10.8-13.2 13.5-16.5 21.6-26.4 VDC Filter Filter Capacitor Absolute Maximum Rating 3.3V 12V 15V 24V -0.7 - 5 -0.7 – 9 -0.7 – 12 -0.7 - 18 -0.7 - 21 -0.7 - 30 VDC Peak Input Voltage time 1 s Input reflected current mA Isolation Specifications Parameters Conditions Typical Maximum Units Tested I/O voltage 60 Sec, <1mA 1500 & 3000 VDC Resistance >1000 MOhm Capacitance 100KHz/0.1V, 24V 100KHZ/0.1V, Others pF

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R13.B 3 of 6 North America only Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy See tolerance envelope graph Short Circuit protection 24Vin models, AM2M-0524S-NZ, AM2M-0512D-NZ, AM2M-0515D-NZ, AM2M-0524D-NZ, AM2M-0524SH30-NZ, AM2M-0512DH30-NZ, AM2M-0515DH30-NZ, AM2M-0524DH30-NZ 1 s Others Continuous, auto-recovery Line voltage regulation For Vin change of 1% ±1.2 % of Vin 3.3Vout models, For Vin change of 1% ±1.5 Load voltage regulation 10% to 100% load ±15 % Temperature coefficient Nominal input,100% full load ±0.03 %/oC Ripple & Noise 20MHz Bandwidth 70 200 mV p-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 100 KHz Operating temperature No Derating -40 to +85 oC Storage temperature -55 to +125 oC Maximum case temperature 100 oC Cooling Free Convection Humidity 95 % RH Case material Black flame-retardant heat-proof epoxy resin (UL94-V0) Weight 2.8 g MTBF 3,500,000 hrs (MIL-HDFK-217F@25 oC) Maximum soldering temperature 1.5mm from case for 10 seconds 300 oC Safety Specifications Parameters Approvals UL (except 3.3V, 9V and 15V input models and AM2M-0503S-NZ) Standards IEC/EN/UL60950-1 EN55022 Class B (see recommended circuit) IEC61000-4-2, Perf. Criteria B (ESD Contact +/- 6KV) Typical Characteristics 3.3V output models Others Typical Load Line Tolerance Envelope Graph Output Current(%) Output Voltage +2.5% -2.5% -7.5% +10% +5% 10% 50% 100% Typical Load Line Tolerance Envelope Graph Output Current(%) Output Voltage Nominal Voltage +1.0% -15% -7.5% +10% +5% 10% 50% 100%

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R13.B 4 of 6 North America only Pin Out Specifications NC: not connected Dimensions Dual 1500VDC Isolated models 20.32 (0.80) 8.20 (0.32) Side View 1 7 10.16 (0.40) 4.10 (0.16) 2.54 (0.10) Bottom View 911 1 911 17.78 (0.70) 15.24 (0.60) 7.62 (0.30) 0.50 (0.02) 4.60 (0.18) Ø 1.00 (0.04) Dimensions are in mm (inch) Pin Pitch Tolerance: ±0.10 mm (±0.004 inch) Case Tolerance: ±0.25 mm (±0.01 inch) 3000VDC Isolated models 20.32 (0.80) 8.20 (0.32) Side View 1 7 10.16 (0.40) 4.10 (0.16) 2.54 (0.10) Bottom View 910 1 910 17.78 (0.70) 15.24 (0.60) 7.62 (0.30) 0.50 (0.02) 4.60 (0.18) Ø 1.00 (0.04) Dimensions are in mm (inch) Pin Pitch Tolerance: ±0.10 mm (±0.004 inch) Case Tolerance: ±0.25 mm (±0.01 inch) 0.30 (0.01) 1500VDC Isolation Pin Single Dual 1 -Vin -Vin

7 NC NC

11 No pin -Vout

9 No Pin Common

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R13.B 5 of 6 North America only Derating - 40 - 20 0 20 40 60 80 100 100 Safe Operating Area Output Power (%) Ambient Temperature º C Free Air Convection 105 Typical application circuit It is not recommended to connect any external capacitor in the application field when output loading is less than 0.5 watt. 1500VDC Isolated models Vin (VDC) Cin (uF) Vout (VDC) Cout (uF) 3.3/5 4.7 3.3/5 10 9/12 2.2 9 4.7 15/24 1 12 2.2 15/24 1 3000VDC Isolated models Vin (VDC) Cin (uF) Vout (VDC) Cout (uF) 5 4.7 5 10 12/15 2.2 9 4.7 24 1 12 2.2 15 1 24 0.47 1500VDC Isolated models Vin (VDC) Cin (uF) Vout (VDC) Cout (uF) 3.3/5 4.7 ±5 4.7 9/12 2.2 ±9 2.2 15/24 1 ±12 1 ±15/±24 0.47 3000VDC Isolated models Vin (VDC) Cin (uF) Vout (VDC) Cout (uF) 5 4.7 ±5 4.7 12/15 2.2 ±9 2.2 24 1 ±12 1 ±15/±24 0.47 DC DC + Vin - Vin Cin Cout +Vout - Vout Single Output DC DC + Vin - Vin Cin Cout 1 +Vout - Vout Dual Output Cout 2 Common

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R13.B 6 of 6 North America only EMI Recommended Circuit (Class B) LDM 6.8µH 4.7µF/ 50V 4.7µF/ 50V DC/DC Converter +V input -V input +V output Load -V output CY 24V input only 1nF/3KV NOTE: Cout values are the same as referenced in the Application Circuit. NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary a nd may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate