DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

2 Watt | DC-DC Converter

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.E 1 of 3 North America only FEATURES:

  • SMD Package • Single Output Models
  • Efficiency up to 86% • Operating temperature -40oC to +105oC
  • Unregulated • Input / Output Isolation 1500 VDC
  • Industry Standard Pinout • Continuous Short Circuit Protection Models Single output Model Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) Max Capacitive Load(uF) Efficiency (%) AM2LS-0503S-NZ 4.5-5.5 3.3 400 1500 220 78 AM2LS-0505S-NZ 4.5-5.5 5 400 1500 220 79 AM2LS-0509S-NZ 4.5-5.5 9 222 1500 220 82 AM2LS-0512S-NZ 4.5-5.5 12 167 1500 220 82 AM2LS-0515S-NZ 4.5-5.5 15 133 1500 220 83 AM2LS-1205S-NZ 10.8-13.2 5 400 1500 220 79 AM2LS-1209S-NZ 10.8-13.2 9 222 1500 220 82 AM2LS-1212S-NZ 10.8-13.2 12 167 1500 220 82 AM2LS-1215S-NZ 10.8-13.2 15 133 1500 220 83 AM2LS-1224S-NZ 10.8-13.2 24 83 1500 220 84 AM2LS-1515S-NZ 13.5-16.5 15 133 1500 220 83 AM2LS-2405S-NZ 21.6-26.4 5 400 1500 220 79 AM2LS-2409S-NZ 21.6-26.4 9 222 1500 220 82 AM2LS-2412S-NZ 21.6-26.4 12 167 1500 220 82 AM2LS-2415S-NZ 21.6-26.4 15 133 1500 220 83 AM2LS-2424S-NZ 21.6-26.4 24 83 1500 220 86 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units Voltage range 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 VDC Reflected Input Ripple Current 15 mA Absolute Max Input

5 Vin

12 Vin

15 Vin

24 Vin

Parameters Conditions Typical Maximum Units Tested I/O voltage 60 sec 1500 models VDC Resistance 500VDC >1000 MOhm Capacitance 20 pF Click on Series name for product info on aimtec.com

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.E 2 of 3 North America only Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 100% load (see tolerance chart) ±2.5 % Short Circuit protection 12 & 15 VDC input models Continuous Auto Recovery 5 & 24 VDC Input models 1 Sec Line voltage regulation For ±1% of Vin 3.3V models only ±1.5 ±1.2 % of Vin Load voltage regulation (10% - 100% load) 3.3V 5 V 9 V 12 V 15 V 24 V Temperature coefficient 100% load ±0.03 %/oC Ripple & Noise At 20 MHz Bandwidth 100 mV p-p * Products with 5Vdc and 24Vdc input voltage; the supply voltage must be discontinued at the end of short circuit duration. General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 100 300 KHz Operating temperature With derating 3.3V & 5V above +71C Others +85C -40 to +105 oC Storage temperature -55 to +125 oC Cooling Free air convection Storage Humidity Non Condensing 95 % RH Case material Epoxy resin (UL94-V0) Weight 1.5 g MTBF >3500K hrs (MIL-HDBK -217F, Ground Benign, t=+25oC)hours Maximum soldering temperature 1.5mm from case for 10 sec 300 oC Maximum case temperature 130 oC Pin Out Specifications and Dimensions Pin Single Output 1 - V Input 2 + V Input

3 No Pin

4 .-V Output 5 +V Output

6 No Pin

7 No Pin

8 N.C. 8.30 (0.32) Top View Front View Side View 1.45 (0.06) 12.70 (0.50) 0.60 (0.02)2.54 (0.10) 7.62 (0.30) 11.20 (0.44) 2.0 (0.08) 5.00 (0.19) 0.25 (0.01) 8.3 (0.32) 0º~10º angle 0.88 (0.04) Single Output Models

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.E 3 of 3 North America only 0 40 10080 120 100 Safe Operating Area Free Air Convection Ambient Temperature º C -50 Output Power % -30 105C ºC71 85C71C 50% ºC85 3.3V & 5V Others Recommended Circuits (EMI Class B) Capacitor selection Table Vout C2

3.3 V 10 µF

5 V 10 µF

9 V 4.7 µF 12 V 2.2 µF

15 V 1 µF

24V 0.47 µF Load Accuracy Tolerance Graph Derating NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are f or reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not hav e conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate 100 70 % Rated Output Voltage Output Voltage Accuracy% Output Current % (Nominal Input) +2.5 % -2.5 % -7.5 % 5 % 10 % Typical load line Vin+ Vin- Vo+ Vo- Single 4.7µF 50V C2 LDM 6.8µH