AM2520YC08 KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

SUBMINIATURE PACKAGE. WIDE VIEWING ANGLE. YOKE LEAD. LONG LIFE - SOLID STATE RELIABILITY. LOW PACKAGE PROFILE. PACKAGE : 1000PCS / REEL. RoHS COMPLIANT. SUBMINIATURE SOLID STATE LAMP Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.

SPEC NO: DSAD1271 REV NO: V.2 DATE: MAR/07/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1202000758 Selection Guid e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T A =25 °C Absolute Maximum Ratings at T A =25 °C Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Yellow 590 nm IF=20mA λD Dominant Wavelength Yellow 588 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Parameter Yellow Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Part No. Dice Lens Type Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2 θ θ θ θ 1/2 AM2520YC08 20 °YELLOW (GaAsP/GaP) WATER CLEAR 10 30 Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width.

SPEC NO: DSAD1271 REV NO: V.2 DATE: MAR/07/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1202000758 Yellow AM2520YC08

SPEC NO: DSAD1271 REV NO: V.2 DATE: MAR/07/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1202000758 Recommended Soldering Pattern (Units : mm ) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/ -1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/ -15% (Test condition is based on the sorting standard). 3.Forward voltage: +/ -0.1V (Test condition is based on the sorting standard). AM2520YC08 Tape Specifications (Units : mm )