AM2520P3C03 KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
z Subminiature package. z Gull wing lead. z Mechanically and spectrally matched to the infrared emitting LED lamp. z Package : 1000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant.
Description
Made with NPN silicon phototransistor chips. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAE0824 REV NO: V.6 DATE: OCT/07/2016 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1202000565 Electrical / Optical Characteristics at TA=25°C Absolute Maximum Ratings at TA=25°C Symbol Parameter Min. Typ. Max. Units Test Conditions VBR CEO Collector-to-Emitter Breakdown Voltage 30 V IC=100uA Ee=0mW/cm2 VBR ECO Emitter-to-Collector Breakdown Voltage 5 V IE=100uA Ee=0mW/cm2 VCE (SAT) Collector-to-Emitter Saturation Voltage 0.8 V IC=2mA Ee=20mW/cm2 I CEO Collector Dark Current 100 nA VCE=10V Ee=0mW/cm2 TR Rise Time (10％ to 90％ ) 15 us VCE = 5V IC=1mA RL=1000Ω TF Fall Time (90％ to 10％ ) 15 us I (ON) On State Collector Current 0.8 1.5 mA VCE = 5V Ee=1mW/cm2 λ=940nm λ0.1 Range of spectral bandwidth 420 1120 nm λp Wavelength of peak sensitivity 940 nm 2θ1/2 Angle of half sensitivity 20 deg Parameter Max.Ratings Collector-to-Emitter Voltage 30V Emitter-to-Collector Voltage 5V Power Dissipation at (or below) 25°C Free Air Temperature 100mW Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAE0824 REV NO: V.6 DATE: OCT/07/2016 PAGE: 3 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1202000565
SPEC NO: DSAE0824 REV NO: V.6 DATE: OCT/07/2016 PAGE: 4 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1202000565 AM2520P3C03 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product.
SPEC NO: DSAE0824 REV NO: V.6 DATE: OCT/07/2016 PAGE: 5 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1202000565 PACKING & LABEL SPECIFICATIONS AM2520P3C03 Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes