AM2520F3C03-P22 KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
© 2018 Kingbright. All Rights Reserved. Spec No: DSAO8894 / 1202000467 Rev No: V.2A Date: 01/03/2018 Page 1 / 4 Part Number Emitting Color (Material) Lens Type Po (mW/sr) @ 20mA [2] Viewing Angle [1] Min. Typ. Min. Typ. 2θ1/2 AM2520F3C03-P22 Infrared (GaAs) Water Clear 5 10 10 20 20° *3 *8 *8 *16 Po (mW/sr) @ 50mA [2]
DESCRIPTION
z F3 Made with Gallium Arsenide Infrared Emitting diodes
FEATURES
z Mechanically and spectrally matched to the phototransistor z Gull wing lead z Long life - solid state reliability z Low package profile z Moisture sensitivity level: 3 z Package: 1000 pcs / reel z RoHS compliant
APPLICATIONS
z Infrared Illumination for cameras z Machine vision systems z Surveillance systems z Industrial electronics z IR data transmission z Remote control PACKAGE DIMENSIONS SELECTION GUIDE AM2520F3C03-P22 Infrared Emitting Diode RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications. Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Radiant Intensity / luminous flux: +/-15%. * Radiant intensity value is traceable to CIE127-2007 standards. Confidential
© 2018 Kingbright. All Rights Reserved. Spec No: DSAO8894 / 1202000467 Rev No: V.2A Date: 01/03/2018 Page 2 / 4 ABSOLUTE MAXIMUM RATINGS at TA=25°C ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C AM2520F3C03-P22 Parameter Symbol Value Unit Power Dissipation PD 90 mW Reverse Voltage VR 5 V Junction Temperature Tj 115 °C Operating Temperature Top -40 to +85 °C Storage Temperature Tstg -40 to +85 °C DC Forward Current IF 50 mA Peak Forward Current IFM [1] 1200 mA Electrostatic Discharge Threshold (HBM) - 8000 V Notes: 1. 1/100 Duty Cycle, 10μs Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Parameter Symbol Emitting Color Value Unit Typ. Max. Wavelength at Peak Emission IF = 20mA λpeak Infrared 940 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Infrared 50 - nm Capacitance C Infrared 90 - pF Forward Voltage IF = 20mA VF [1] Infrared 1.2 1.6 V Reverse Current (VR = 5V) IR Infrared - 10 uA Notes: 1. Forward voltage: ±0.1V. 2. Wavelength value is traceable to CIE127-2007 standards. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Confidential
© 2018 Kingbright. All Rights Reserved. Spec No: DSAO8894 / 1202000467 Rev No: V.2A Date: 01/03/2018 Page 3 / 4 Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 0 1 02 03 04 05 0 T a = 25 °C Forward current (mA) Radiant intensity normalised at 20mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Radiant intensity normalised at Ta = 25 °C INFRARED 20% 40% 60% 80% 100% 550 600 650 700 750 800 850 900 950 1000 1050 T a = 25 °C Wavelength (nm) Relative Intensity (a. u.) TECHNICAL DATA RELATIVE INTENSITY vs. WAVELENGTH TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS 0.5 0.50.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C SPATIAL DISTRIBUTION AM2520F3C03-P22 Forward Current vs. Forward Voltage Radiant Intensity vs. Forward Current Forward Current Derating Curve Radiant Intensity vs. Ambient Temperature Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. Confidential
© 2018 Kingbright. All Rights Reserved. Spec No: DSAO8894 / 1202000467 Rev No: V.2A Date: 01/03/2018 Page 4 / 4 PACKING & LABEL SPECIFICATIONS AM2520F3C03-P22 PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference on ly. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes Confidential