AM12E-FZ AIMTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

12 Watt | DC-DC Converter

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12 1 of 4 North America only Picture coming soon FEATURES:

  • Remote On / Off Control • Operating temperature -40oC to + 85oC
  • Wide 2:1 input range • Input / Output Isolation 3000VDC
  • High efficiency up to 87% • Continuous short circuit protection
  • Industry Standard Package
  • No minimum load
  • Over Voltage Protection Models Single output Model Input Voltage (V) Output Voltage (V) Output Current Max (mA) Capacitance load, max (μF) Efficiency (%) AM12E-1203SH30-FZ 9-18 3.3 3500 4700 77 AM12E-1205SH30-FZ 9-18 5 2400 3300 82 AM12E-1212SH30-FZ 9-18 12 1000 680 86 AM12E-1215SH30-FZ 9-18 15 800 330 85 AM12E-2403SH30-FZ 18-36 3.3 3500 4700 77 AM12E-2405SH30-FZ 18-36 5 2400 3300 82 AM12E-2412SH30-FZ 18-36 12 1000 680 87 AM12E-2415SH30-FZ 18-36 15 800 330 86 AM12E-4803SH30-FZ 36-75 3.3 3500 4700 78 AM12E-4805SH30-FZ 36-75 5 2400 3300 82 AM12E-4812SH30-FZ 36-75 12 1000 680 87 AM12E-4815SH30-FZ 36-75 15 800 330 86 Models Dual output Model Input Voltage (V) Output Voltage (V) Output Current Max (mA) Capacitance load, max (μF) Efficiency (%) AM12E-1205DH30-FZ 9-18 ±5 ±1200 ±1000 82 AM12E-1212DH30-FZ 9-18 ±12 ±500 ±220 86 AM12E-1215DH30-FZ 9-18 ±15 ±400 ±200 85 AM12E-2405DH30-FZ 18-36 ±5 ±1200 ±1000 83 AM12E-2412DH30-FZ 18-36 ±12 ±500 ±220 87 AM12E-2415DH30-FZ 18-36 ±15 ±400 ±200 86 AM12E-4805DH30-FZ 36-75 ±5 ±1200 ±1000 83 AM12E-4812DH30-FZ 36-75 ±12 ±500 ±220 87 AM12E-4815DH30-FZ 36-75 ±15 ±400 ±200 86 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units Voltage range 12 9-18 VDC 24 18-36 48 36-75 Filter π(PI ) Transient response time (50% load step) 2000 µs Start up time 550 ms Absolute Maximum Rating 12 Vin -0.7-25 VDC 24 Vin -0.7-50 48 Vin -0.7-100 Peak Input Voltage time 100 ms Remote Control Pin ON OFF Open or 3.5V ~12V, <0.2mA Short or 0V ~ 1.2V, <3mA Vdc

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12 2 of 4 North America only Input Specifications (continued) Parameters Nominal Typical Maximum Units No Load Input Current 31 mA Input reflected current 130 mAp-p Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3 sec 3000 VDC Resistance > 1000 MOhm Capacitance 500 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy (full load) ±1 % Short Circuit protection Continuous Short circuit restart Auto Recovery Over load protection % of full load 150 % Line voltage regulation HL-LL ±0.5 % Load voltage regulation 0% to 25% 25% to 100% Balanced Load (Dual) Unbalanced 25-100% FL ±0.5 ±0.5 Temperature coefficient ±0.02 % oC Ripple & Noise 20MHz Bandwidth 100 mVp-p Rising time 10 ms Over Voltage Protection (Zener Diode) 3.3V model 5V model 12V model 15V model 3.9V 6.2V 15V 18V VDC General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 300 KHz Operating temperature See derating chart -40 to +85 oC Storage temperature -55 to +105 oC Maximum case temperature 100 oC Cooling Free air convection Humidity 95 % Case material Nickel coated copper Potting Material UL94V-0 rated Weight 30 g MTBF > 1,960,000 hrs. (MIL-HDBK -217F, Ground Benign, t=+25oC) Maximum soldering temperature 1.5mm from case max 10 sec 260 oC Pin Out Specifications Pin Single Dual 1 +V Input +V Input 2 -V Input -V Input 3 +V Output +V Output 4 Trim Common. 5 -V Output -V Output

6 Remote On/Off Remote On/Off

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12 3 of 4 North America only Dimensions 5.08 (0.20) Min Notes: All dimensions are typical in millimeters (inches). Tolerance ±0.5 (±0.02) Bottom View DIA 1.00 (0.04) 20.32 (0.80) 15.24 (0.60) 15.24 (0.60) 10.16 (0.40) 7.62 (0.31) 5.08 (0.20) 10.16 (0.40) 10.16 (0.40) 2.54 (0.10) 2.54 (0.10) 50.80 (2.00) 25.40 (1.00) 10.16 (0.40) Isolative Plastic base plate 2.54 (0.10) Derating - 40 - 20 0 20 40 60 80 100 100 Safe Operating Area Output Power (%) Ambient Temperature º C Free Air Convection 71 º C

www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12 4 of 4 North America only TRIM Function Vo+ Vo- TRIM AM12E-FZ TRIM UP Vo+ Vo- TRIM AM12E-FZ TRIM DOWN

3.3 V Output

5 V Output

Percentage R1 ( kΩ) R2 ( kΩ) Percentage R1 ( kΩ) R2 ( kΩ) 10% 0 10% 0 7.5% 7.83 7.5% 3.86 5% 28.25 5% 14.8 2.5% 89.49 2.5% 47.59 -10% 10.63 -10% 0 -7.5% 27.92 -7.5% 1.08 -5% 62.5 -5% 12.28 -2.5% 166.26 -2.5% 45.89

12 V Output

15 V Output

Percentage R1 ( kΩ) R2 ( kΩ) Percentage R1 ( kΩ) R2 ( kΩ) 10% 0 10% 0 7.5% 4.74 7.5% 5.33 5% 16.11 5% 17 2.5% 50.22 2.5% 52 -10% 39.19 -10% 59 -7.5% 61.01 -7.5% 88.17 -5% 104.64 -5% 146.5 -2.5% 235.53 -2.5% 321.5 NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate