ALTERNATE-SLOT LSTD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
global solutions: local support TM Innovative Technology for a Connected World USA: +1.866.928.8181 Europe: +49.0.8031.2460.0 Asia: +86.755.2714.1166 www.lairdtech.com FINGERSTOCK GASKETS AND METAL GROUNDING PRODUCTS As the world’s leading fabricator of fingerstock, Laird Technologies has developed highly sophisticated, and often proprietary, shielding and grounding technology. Our innovations are necessary to achieve outstanding combinations of performance parameters. From a vast selection of product configurations, platings and mounting techniques, to a full range of low compression force requirements and high transfer impedance characteristics, there is a Laird Technologies gasket or grounding product just right for the job. Laird Technologies alternating slot/cut design is designed for use in a wide variety of slotted applications, such as front panel handles, plug-in units, subrack assemblies, chassis covers and backplanes. The alternating slot / cut design serves to enhance the gasket strength, while providing enough flexibility to allow the part to be folded in half with no resultant finger damage. This is especially significant during installation or repair. The Alternate Stock Series is available in a wide variety of plating finishes to meet galvanic compatibility requirements. It is also offered in UltraSoft, low-compression series (-78). All dimensions shown are in inches (millimeters) unless otherwise specified. Laird Technologies alternating slot/cut design is designed for use in a wide variety of slotted applications, such as front panel handles, plug-in units, subrack assemblies, chassis covers and backplanes. The alternating slot / cut design serves to enhance the gasket strength, while providing enough flexibility to allow the part to be folded in half with no resultant finger damage. This is especially significant in during installation or repair. Available in a wide variety of plating finishes to meet galvanic compatibility requirements. Available in UltraSoft™ , low compression series (-078). TOP VIEW RIGHT VIEW 0.191 (4.851) H 0.050 (1.270) R. 0.050 (1.270) 52.5° 27.0°0.026 (0.660) 2X 0.053 (1.346) 0.190 (4.826) 0.0025 (0.063) 0.012 (0.305) 0.085 REF. (2.159) 0.065 (1.651) TOP VIEW 16.000 (406.400) Length 14.568 (370.027) Length 0.374 (9.500) Pitch 0.320 (8.128)
0.218 TYP
Dimples on 1.500 (38.100) Centers Randomly Located Approximate number of fingers is 64. Pitch 0.250 (6.350) Slot 0.018 (0.457) 77-077 77-098 Laird Technologies offers a unique product designed to shield the front panels of IEEE standard 1101.10 card cages, commonly referred to as Dot-10, called the Compact PCI gasket. This front panel shielding has been designed to shield between the front panels on sub racks and plug-in units. This is a beryllium copper solid top symmetrical slotted fingerstock strip pre-plated in sulfamate nickel. It is designed to mount on the “T” shape on a front panel extrusion (see below). Specially designed for wiping applications, this configuration allows total symmetrical compression action with bi-directional engagement. Standard size shown is based on the 9.5" (241.300) length per the Dot-10 standard. Other lengths and plating finishes are available for your specific application. RIGHT VIEW 2X 0.085 (2.159) R 0.110 (2.794) R 0.020 (0.508) 0.110 (2.794) Alternate Slot Series Fingerstock Gaskets
All dimensions shown are in inches (millimeters) unless otherwise specified. Laird Technologies alternating slot/cut design is designed for use in a wide variety of slotted applications, such as front panel handles, plug-in units, subrack assemblies, chassis covers and backplanes. The alternating slot / cut design serves to enhance the gasket strength, while providing enough flexibility to allow the part to be folded in half with no resultant finger damage. This is especially significant in during installation or repair. Available in a wide variety of plating finishes to meet galvanic compatibility requirements. Available in UltraSoft™ , low compression series (-078). TOP VIEW RIGHT VIEW 0.191 (4.851) H 0.050 (1.270) R. 0.050 (1.270) 52.5° 27.0°0.026 (0.660) 2X 0.053 (1.346) 0.190 (4.826) 0.0025 (0.063) 0.012 (0.305) 0.085 REF. (2.159) 0.065 (1.651) TOP VIEW 16.000 (406.400) Length 14.568 (370.027) Length 0.374 (9.500) Pitch 0.320 (8.128) Dimples on 1.500 (38.100) Centers Randomly Located Approximate number of fingers is 64. Pitch 0.250 (6.350) Slot 0.018 (0.457) 77-077 77-098 Laird Technologies offers a unique product designed to shield the front panels of IEEE standard 1101.10 card cages, commonly referred to as Dot-10, called the Compact PCI gasket. This front panel shielding has been designed to shield between the front panels on sub racks and plug-in units. This is a beryllium copper solid top symmetrical slotted fingerstock strip pre-plated in sulfamate nickel. It is designed to mount on the “T” shape on a front panel extrusion (see below). Specially designed for wiping applications, this configuration allows total symmetrical compression action with bi-directional engagement. Standard size shown is based on the 9.5" (241.300) length per the Dot-10 standard. Other lengths and plating finishes are available for your specific application. RIGHT VIEW 2X 0.085 (2.159) R 0.110 (2.794) R 0.020 (0.508) 0.110 (2.794) All dimensions shown are in inches (millimeters) unless otherwise specified. Laird Technologies alternating slot/cut design is designed for use in a wide variety of slotted applications, such as front panel handles, plug-in units, subrack assemblies, chassis covers and backplanes. The alternating slot / cut design serves to enhance the gasket strength, while providing enough flexibility to allow the part to be folded in half with no resultant finger damage. This is especially significant in during installation or repair. Available in a wide variety of plating finishes to meet galvanic compatibility requirements. Available in UltraSoft™ , low compression series (-078). TOP VIEW RIGHT VIEW 0.191 (4.851) H 0.050 (1.270) R. 0.050 (1.270) 52.5° 27.0°0.026 (0.660) 2X 0.053 (1.346) 0.190 (4.826) 0.0025 (0.063) 0.012 (0.305) 0.085 REF. (2.159) 0.065 (1.651) TOP VIEW 16.000 (406.400) Length 14.568 (370.027) Length 0.374 (9.500) Pitch 0.320 (8.128) Dimples on 1.500 (38.100) Centers Randomly Located Approximate number of fingers is 64. Pitch 0.250 (6.350) Slot 0.018 (0.457) 77-077 77-098 Laird Technologies offers a unique product designed to shield the front panels of IEEE standard 1101.10 card cages, commonly referred to as Dot-10, called the Compact PCI gasket. This front panel shielding has been designed to shield between the front panels on sub racks and plug-in units. This is a beryllium copper solid top symmetrical slotted fingerstock strip pre-plated in sulfamate nickel. It is designed to mount on the “T” shape on a front panel extrusion (see below). Specially designed for wiping applications, this configuration allows total symmetrical compression action with bi-directional engagement. Standard size shown is based on the 9.5" (241.300) length per the Dot-10 standard. Other lengths and plating finishes are available for your specific application. RIGHT VIEW 2X 0.085 (2.159) R 0.110 (2.794) R 0.020 (0.508) 0.110 (2.794) EMI-DS-FINGERSTOCK-ALT SLOT 1112 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non-infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2011 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. Alternate Slot Series Fingerstock Gaskets