AEQ EMERSON-NETWORKPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 Special Features Electrical Specs Special Features

60 Amps

  • High efficiency
  • Industry standard package 1.45" x 2.30"
  • Baseplate (AEQ) or Openframe (ALQ) construction
  • High capacitive load limit on start-up
  • Remote sense compensation
  • Regulation to zero load
  • Fixed frequency switching
  • Basic insulation
  • EU Directive 2002/95/EC Compliant for RoHS Input Input Range 36 to 75 VDC Input Surge 100V /100ms Efficiency > 90%@1.8V (50% to 100% load) Output Line Regulation ±0.2%Vo Load Regulation ±0.2%Vo Noise/Ripple 25mV typ Remote sense Up to 10% of Vo Transient Response 4% deviation typical 50% to 75% Load change 0.1A/µs Slew Rate 150µs recovery Overvoltage Protection 125% Vo Current Limit 115% nominal output Switching Frequency 480kHz Control Voltage Adjust 90 to 110% Vo Enable TTL compatible (Positive or Negative enable options) Operating temperature range: -40°C to +85°C ambient (ALQ - Openframe) -40°C to +105°C baseplate (AEQ - Baseplate) Storage temperature: -40°C to +125°C Overtemperature protection: 115°C PCB temperature (Typical) MTBF: > 1 million hours UL,cUL 60950 TUV EN60950 Environmental Total Power: 108W Input Voltages: 48V No. of Outputs: Single Safety Astec Industry Standard AEQ/ALQ60 High Efficiency Quarter Brick

Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 AMERICAS

5810 Van Allen Way

Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698

Ordering Information

www.astecpower.com ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Input Output Output Efficiency Model Number Voltage Voltage Current 36V to 75V 1.8V 60A 90% Typ AEQ60Y48(N) - (6)(3)(L) 36V to 75V 1.8V 60A 90% Typ ALQ60Y48(N) - (6)(3)(L) OPTIONS suffix "N" = Negative Logic Enable (without suffix “N” designates Positive Logic Enable) suffix “6” = 3.7mm pin length (5mm nominal default pin length) suffix “-3” = single pair of output pins (Pins 4 and 10 unstuffed) without suffix “-3” = double pair of output pins (Pins 4,5, 9 and 10 are present) suffix “L” = RoHS compliant (RoHS 6) / “Blank” = RoHS compliant with Lead (Pb) in solder exemption (RoHS 5) Ø 0.040(1.02) Dia Pins 6 places Ø 0.060 (1.52) Dia Pins 4 places 2.30 [58.4] 1.45 [36.8] Pin Assignments AEQ / ALQ60Y48 Single Output 1. +Vin 2. Enable 3. - Vin 4. Common (OPTIONAL) 5. Common 6. - Sense 7. Trim 8. + Sense 9. + Vout 10. + Vout (OPTIONAL) Notes: 1. Nominal values apply with sense pins connected to +Vout and Ground Return with other control pins unconnected. 2. Consult the Technical Reference Notes for more detailed information. 3. Dimensions provided in the mechanical outline are nominal values. 4. At high line, V IN = 75V and no load, V O = 0A, the module requires 1500µF capacitive load to provide greater than 45° of phase margin. 5. Specifications subject to change without notice. 6. 2 Years warranty. * Astec reserves the right to make changes to the information contained herein without notice and assumes no liability as a result of its use or application. (REV03: DECEMBER 20, 2006) Astec Industry Standard 0.73 [18.4] 1.02 [26.0] 1.45 [36.8] 0.43 [10.8] 0.57 [14.6] 0.73 [18.4] 1.02 [26.0] 2.30 [58.4] 0.37 [9.4] 0.25 [6.3] 0.58 [14.7] ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) MECHANICAL TOLERANCE ± .002(0.5) PIN PLACEMENT TOLERANCE : ± 0.005(0.127) NOTES: 0.15 [3.8] 1.88 [47.7] 2.00 [50.8] 0.42 [10.8] PINASSIGNMENT 1 + VIN

2 Enable (on/off)

4 -Vout (optional) 5 -Vout 6 -Sense

7 Trim

10+ Vout (optional) 453 ALQ - Open Frame Series All dimensions are in Inches [mm]. Pin placement tolerance 0.005[0.127]. M3 X 0.5 THROUGH MOUNTING INSERT (2 PLCS) MAXIMUM SCREW TORQUE 3.9 IN LBS (0.44 N -m 2.30 [58.4] 1.45 [36.8] 0.22 [5.6] 1.86 [47.2] 1.03 [26.2] 0.21 [5.3] Ø 0.060 (1.52) Dia Pins 4 places Ø 0.040(1.02) Dia Pins 6 places 0.43 [10.8] 0.57 [14.6] 0.73 [18.4] 1.02 [26.0] 0.15 [3.8] 1.88 [47.7] 2.00 [50.8] 1.45 [36.8] 0.42 [10.8] 0.73 [18.4] 0.44 [11.2] 0.65 [16.4] 0.25 [6.3] AEQ - Baseplate Series