ALQ50 EMERSON-NETWORKPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662 Special Features Electrical Specs Special Features
50 Amps
- Industry standard Quarter Brick package
- Openfrmae low profile construction
- High capacitive load start-up
- Regulation to zero load
- Fixed frequency switching for EMI predictability
- Industry Standard Features: Input UVLO with hysteresis, Enable, OCP, OCP, OTP, Output Voltage Trim, Differential Remote Sense
- Meets Basic Insulation Input Input Range 36 to 75 VDC Input Surge 100V /100ms Efficiency 3.3V @ 91% (typical) Output Line / Load < 0.3% Vo (typical) Regulation Output Current up to 50A max (3.3V at 40A max) Noise/Ripple1 40mVPK-PK (typical) Remote sense Up to 10% of Vo Transient Response 100mV (typ) deviation 50% to 75% Load change 250µs (typ) recovery Overvoltage Protection 130% typ for Vo < 3.3V 125% typ for 3.3V Over Current Protection 120% Iout typ (autorecovery) Over Temperature 115C average PCB temperature Protection (autorecovery) Switching Frequency 480kHz 540kHz (2.5V output) Isolation Voltage 1500Vdc Control Voltage Voltage Trim ±10% VO,NOM Enable Postive or Negative Logic options Operating Ambient Temperature: -40°C to +85°C Storage Temperature: -40°C to +125°C MTBF: > 1 million hours UL, cUL 60950 TUV EN60950 Environmental Total Power: 132W Input Voltages: 48V No. of Outputs: Single Safety ALQ50High Efficiency Quarter Brick
Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698
Ordering Information
www.astecpower.com ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Input Output Output Efficiency2 Model Number Voltage Voltage Current 36V to 75V 3.3V 40A 91% Typ ALQ40F48 (N) 36V to 75V 2.5V 50A 90% Typ ALQ50G48(N) 36V to 75V 1.8V 50A 89% Typ ALQ50Y48(N) 36V to 75V 1.2V 50A 86% Typ ALQ50K48(N) OPTIONS: (N) : "N" = designates Negative Logic Enable (default is Positive Enable with no suffix “N” required) 2.30 [58.4] 1.48 [37.6] [1.0Ø] 6 PLACES [1.5Ø] 2 PLACES 0.04Ø 0.36 [9.1] PIN SIDE DOWN SIDE VIEW 0.06Ø 0.24 MAX [6.0] [5.0]0.20 MIN 3 4 Pin Assignments Single Output 1. +Vin 2. Enable (On/Off) 3. -Vin 4. -Vout 5. -Sense 6. Trim 7. +Sense 8. +Vout Notes: 1. 20 MHz bandwidth. External 10 uF tant. capacitor in parallel with 1 uF ceramic capacitor placed across the output and secondary return ground. 2. Efficiency measurements are typical values taken at full load, nominal line and TA = 25°C. 3. All specifications are typical at nominal line, full load and TA = 25°C unless otherwise noted. 4. All specifications subject to change without notice. 5. Mechanical drawings are for reference only. Dimensions are in inches [millimeters]. Pin placement tolerance ± 0.005 [0.127]. Mechanical Tolerance ± 0.02 [0.5]. ∅ = 0.060” for Pins 4&8, the rest are ∅ = 0.40”. 6. Technical Reference Notes should be consulted for detailed information when available. 7. Warranty 1yr. Astec reserves the right to make changes to the information contained herein without notice and assumes no liability as a result of its use and application. (REV 07: OCTOBER 19, 2004) PIN SIDE DOWN 1.04 [26.4] 0.44 [11.2] 0.15 [3.8] LC 0.74 [18.8] 1.04 [26.5] 0.89 [22.7] 0.74 [18.9] 0.59 [15.0] 2.00 [50.8] 0.44 [11.2] PIN SIDE UP