AL1G125

AL1G125 AITSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

AiT Semiconductor Inc. www.ait-ic.com AL1G125 LOGIC SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT REV1.0 - MAY 2021 RELEASED - - 1 - DESCRIPTION FEATURES This bus buffer gate is designed for 1.65V to 5.5V VCC operation. The AL1G125 is a single line driver with 3-state output. The output is disabled when the output-enable (OE̅̅̅̅̅) input is high. The CMOS AL1G125 has high output drive while maintaining low static power dissipation over a broad Vcc operating range. The AL1G125 is fully specified for partial -power- down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. To ensure the high -impedance state during power up or power down , OE̅̅̅̅̅ should be tied to V CC through a pullup resistor, the minimum value of t he resistor is determined by the current -sinking capability of the driver. The AL1G125 is available in SOT-25 and SC70-5 packages.

ORDERING INFORMATION

SPQ: 3,000pcs/Reel E5 AL1G125E5R AL1G125E5VR SC70-5 SPQ: 3,000pcs/Reel C5 AL1G125C5R AL1G125C5VR Note V: Halogen free Package R: Tape & Reel AiT provides all RoHS products ⚫ Support 5V Vcc Operation ⚫ Inputs Accept Voltages to 5.5V ⚫ Provide Down Traslation to Vcc ⚫ Low Power Consumption:1μA (Max) ⚫ ±24mA Output Drive at VCC=3.0V ⚫ Latch-up Performance Exceeds 100mA ⚫ Operating Temperature Range: -40°C to +125°C ⚫ Available in SOT-25 and SC70-5 packages APPLICATION ⚫ Cable Modem Termination System ⚫ High-Speed Data Acquisition and Generation ⚫ Military: Radar and Sonar ⚫ Motor Control: High-Voltage ⚫ Power Line Communication Modem ⚫ SSD: Internal or External ⚫ Video Broadcasting and Infrastructure: Scalable Platform ⚫ Video Broadcasting: IP-Based Multi-Format ⚫ Transcoder ⚫ Video Communication System ⚫ AV Receiver, Portable Media Player ⚫ Digital Picture Frame (DPF) ⚫ Personal Navigation Device (GPS) SIMPLIFIED SCHEMATIC

AiT Semiconductor Inc. www.ait-ic.com AL1G125 LOGIC SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT REV1.0 - MAY 2021 RELEASED - - 2 - PIN DESCRIPTION Top View Top View Pin # Symbol I/O Function SOT-25 SC70-5 2 2 A I A Input 3 2 GND - Ground Pin 4 4 Y O Y Output 5 5 VCC - Power Pin FUNCTION TABLE Inputs Output L H H L L L H X Z H=HIGH Logic Level L =LOW Logic Level X=Don’t Care Z=High-impedance OFF-state

AiT Semiconductor Inc. www.ait-ic.com AL1G125 LOGIC SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT REV1.0 - MAY 2021 RELEASED - - 3 - ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range, unless otherwise notedNOTE1 VCC, Supply Voltage Range -0.5V ~ 6.5V VI, Input Voltage RangeNOTE1 -0.5V ~ 6.5V VO, Voltage range applied to any output in the high-impedance or power-off stateNOTE1 -0.5V ~ 6.5V VO, Voltage range applied to any output in the high or low stateNOTE1, 2 -0.5V ~ VCC+0.5V IIK, Input Clamp Current VI<0 -50mA IOK, Output Clamp Current VO<0 -50mA IO, Continuous Output Current ±50mA Continuous Current Through VCC or GND ±100mA TJ, Junction Temperature -65℃ ~ 150℃ TSTG, Storage Temperature -65℃ ~ 150℃ ESD Ratings V(ESD), Electrostatic Discharge Human-body model (HBM) ±8000V Machine model (MM) ±500V Stress beyond above listed “Absolute Maximum Ratings” may lead permanent damage to the device. These are stress ratings only and operations of the device at these or any other conditions beyond those indicated in the operational sections of the specifications are not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. NOTE1: The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. NOTE2: The value of VCC is provided in the Recommended Operating Conditions table.

AiT Semiconductor Inc. www.ait-ic.com AL1G125 LOGIC SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT REV1.0 - MAY 2021 RELEASED - - 4 - RECOMMENDED OPERATING CONDITIONS over recommended operating free -air temperature range (TYP values are at T A = +25℃, unless otherwise noted.)NOTE3 Parameter Symbol Conditions Min. Typ. Max. Unit Supply Voltage VCC Operating 1.65 - 5.5 V Data retention only 1.5 - 5.5 High-Level Input Voltage VIH VCC=1.65V to 1.95V 0.65xVCC - - V VCC=2.3V to 2.7V 1.7 - - VCC=3V to 3.6V 2.2 - - VCC=4.5V to 5.5V 0.7xVCC - - Low-Level Input Voltage VIL VCC=1.65V to 1.95V - - 0.15xVCC V VCC=2.3V to 2.7V - - 0.3 VCC=3V to 3.6V - - 0.4 VCC=4.5V to 5.5V - - 0.15xVCC Input Voltage VI 0 - 5.5 V Output Voltage VO 0 - VCC V Input Transition Rise or Fall tr, tf ns/V VCC=3.3V±0.3V - - 10 VCC=5V±0.5V - - 5 Operating Temperature TA -40 - +125 ℃

AiT Semiconductor Inc. www.ait-ic.com AL1G125 LOGIC SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT REV1.0 - MAY 2021 RELEASED - - 5 - DC CHARACTERISTICS over recommended operating free -air temperature range (TYP values are at T A = +25℃, unless otherwise noted.)NOTE3 Parameter Conditions Temp Min. Typ. Max. Unit VOH IOH=-100μA, VCC=1.65V to 5.5V -40°C to +125°C VCC-0.1 - - V IOH=-4mA, VCC=1.65V 1.2 - - IOH=-8mA, VCC=2.3V 1.9 - - IOH=-16mA, VCC=3V 2.4 - - IOH=-24mA, VCC=3V 2.3 - - IOH=-32mA, VCC=4.5V 3.8 - - VOL IOH=100μA, VCC=1.65V to 5.5V -40°C to +125°C - - 0.1 V IOH=4mA, VCC=1.65V - - 0.45 IOH=8mA, VCC=2.3V - - 0.3 IOH=16mA, VCC=3V - - 0.4 IOH=24mA, VCC=3V - - 0.55 IOH=32mA, VCC=4.5V - - 0.55 II A or OE̅̅̅̅̅ Inputs VI=5.5V or GND, VCC=0V to 5.5V +25℃ - ±0.1 ±1 μA -40°C to +125°C - - ±5 Ioff VI or VO=5.5V, VCC=0V +25℃ ±0.1 ±1 μA -40°C to +125°C ±10 IOZ VO=0V to 5.5V, VCC=3.6V -40°C to +125°C - - 10 μA ICC VI=5.5V or GND, IO=0, VCC=1.65V to 5.5V ΔICC One input at VCC-0.6V, Other inputs at VCC or GND, VCC=3V to 5.5V -40°C to +125°C - - 500 μA

AiT Semiconductor Inc. www.ait-ic.com AL1G125 LOGIC SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT REV1.0 - MAY 2021 RELEASED - - 6 - Switching Characteristics, CL=15pF over recommended operating free-air temperature range (-40°C to 125°C, unless otherwise noted.)NOTE3 Parameter From (Input) To (Output) VCC=1.8V ±0.15V VCC=2.5V ±0.2V VCC=3.3V ±0.3V VCC=5V ±0.5V Unit Typ. Typ. Typ. Typ. tpd A Y 6.1 3.7 3.9 2.1 ns Switching Characteristics, CL=30pF or 50pF over recommended operating free-air temperature range (-40°C to 125°C, unless otherwise noted.)NOTE3 Parameter From (Input) To (Output) VCC=1.8V ±0.15V VCC=2.5V ±0.2V VCC=3.3V ±0.3V VCC=5V ±0.5V Unit Typ. Typ. Typ. Typ. tpd A Y 8.6 5.3 4.0 2.9 ns ten OE̅̅̅̅̅ Y 9.5 5.8 5.0 3.3 ns tdis OE̅̅̅̅̅ Y 7.4 4.3 4.4 3.0 ns Operating Characteristics TA=25°C Parameter Test Conditions Cpd Power Dissipation Capacitance Output Enabled f=10MHZ 18 18 19 21 pF Output Disabled 2 2 2 4 NOTE3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation.

NOTE A: CL includes probe and jig capacitance. NOTE B: Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. NOTE C: All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50Ω. NOTE D: The outputs are measured one at a time, with one transition per measurement. NOTE E: tPLZ and tPHZ are the same as tdis. NOTE F: tPZL and tPZH are the same as ten. NOTE G: tPLH and tPHL are the same as tpd. NOTE H: All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms

AiT Semiconductor Inc. www.ait-ic.com AL1G125 LOGIC SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT REV1.0 - MAY 2021 RELEASED - - 8 -

PACKAGE INFORMATION

Dimension in SOT-25 (Unit: mm) Symbol Millimeters Inches Min Max Min Max A 1.050 1.250 0.041 0.049 A1 0.000 0.100 0.000 0.004 A2 1.050 1.150 0.041 0.045 b 0.300 0.500 0.012 0.020 c 0.100 0.200 0.004 0.008 D 2.820 3.020 0.111 0.119 E 1.500 1.700 0.059 0.067 E1 2.650 2.950 0.104 0.116 e 0.950 BSC 0.037 BSC e1 1.800 2.000 0.071 0.079 L 0.300 0.600 0.012 0.024 θ 0° 8° 0° 8°

AiT Semiconductor Inc. www.ait-ic.com AL1G125 LOGIC SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT REV1.0 - MAY 2021 RELEASED - - 9 - Dimension in SC70-5 (Unit: mm) Symbol Millimeters Inches Min Max Min Max A 0.900 1.100 0.035 0.043 A1 0.000 0.100 0.000 0.004 A2 0.900 1.000 0.035 0.039 b 0.150 0.350 0.006 0.014 c 0.080 0.150 0.003 0.006 D 2.000 2.200 0.079 0.087 E 1.150 1.350 0.045 0.053 E1 2.150 2.450 0.085 0.096 e 0.650 BSC 0.026 BSC e1 1.300 BSC 0.051 BSC L 0.260 0.460 0.010 0.018 L1 0.525 0.021 θ 0° 8° 0° 8°

AiT Semiconductor Inc. www.ait-ic.com AL1G125 LOGIC SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT REV1.0 - MAY 2021 RELEASED - - 10 - IMPORTANT NOTICE AiT Semiconductor Inc. (AiT) reserves the right to make changes to any its product, specifications, to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. AiT Semiconductor Inc. 's integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life support applications, devices or systems or other critical applications. Use of AiT products in such applications is understood to be fully at the risk of the customer. As used herein may involve potential risks of death, personal injury, or servere property, or environmental damage. In order to minimize risks associated with the customer's applications, the customer should provide adequate design and operating safeguards. AiT Semiconductor Inc. assumes to no liability to customer product design or application support. AiT warrants the performance of its products of the specifications applicable at the time of sale.