AK10-058C LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Revision: October 19, 2011, 16:35 ©2011 Littelfuse, Inc. Specifications are subject to change without notice. T ransient Voltage Suppression Diodes 141 Axial Leaded – 10kA > AK10 series AK10 Series Please refer to http://www.Littelfuse.com/series/AK10.html for current information. AGENCY AGENCY FILE NUMBER E128662 The AK10 series of high current transient suppressors have been specially designed for use in A.C. line protection and any demanding applications (AC or DC).They offer superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology, which provides a clamping voltage lower than the avalanche voltage (but above the rated working voltage). Therefore, any voltage rise due to increased current conduction is contained to a minimum, providing the best possible protection level. They can also be connected in series and/ or parallel to create very high capacity protection solutions.

Description

Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) AK10 Series

  • Halogen-Free
  • RoHS compliant
  • Foldbak technology for superior clamping factor
  • Glass passivated junction
  • Bi-directional
  • Ultra compact: Less than one-tenth the size of traditional discrete solutions
  • Very Low Clamping Voltage
  • Sharp Breakdown Voltage
  • Low Slope Resistance

Electrical Characteristics

Note: Using 8 x 20µS wave shaped defined in IEC 61000-4-5. Part Numbers Standoff Voltage (VSO) Volts Max. Reverse Leakage (IR) @VSO µA Reverse Breakdown Voltage (VBR) @ IT Test Current IT Max. Clamping Voltage VCL @ Peak Pulse Current (IPP) (Note 1) Max. Temp Coefficient of VBR Max. Capacitance

0 Bias 10kHz

Min Volts Max Volts (mA) VCL Volts IPP Amps (%/OC) (nF) AK10 - 058C 58 20 64 70 10 110 10,000 0.1 6.5 X AK10 - 066C 66 20 72 80 10 120 10,000 0.1 6.5 X AK10 - 076C 76 20 85 95 10 140 10,000 0.1 6.5 X AK10 - 170C 170 20 180 220 10 260 10,000 0.1 2.8 X AK10 - 190C 190 20 200 245 10 290 10,000 0.1 2.5 X AK10 - 240C 240 20 250 285 10 340 10,000 0.1 2.2 X AK10 - 380C 380 20 401 443 10 520 10,000 0.1 2.0 X AK10 - 430C 430 20 440 490 10 625 10,000 0.1 1. 4 X Parameter Symbol Value Unit Operating Junction and Storage Temperature Range TJ , TSTG (-)55 to 150 °C Current Rating1 IPP 10 kA Note: 1 . Rated IPP measured with 8 x 20μs pulse. AK10 Series RoHS Pb

Revision: October 19, 2011, 16:35 ©2011 Littelfuse, Inc. Specifications are subject to change without notice. T ransient Voltage Suppression Diodes 142 Axial Leaded – 10kA > AK10 series AK10 Series Please refer to http://www.Littelfuse.com/series/AK10.html for current information. Flow/Wave Soldering (Solder Dipping) Peak T emperature : 265OC Dipping Time : 10 seconds Soldering : 1 time Temperature (T Time (t) Ts(min) Ts(max) TL TP ts Preheat tL tp Ramp-up Critical Zone TL to TP Ramp-down t 25˚C to Peak 25˚C Physical Specifications Weight Contact manufacturer Case Epoxy encapsulated T erminal Silver plated leads, solderable per MIL -STD-202 Method 208 Soldering Parameters Reflow Condition Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Ratings and Characteristic Curves (TA=25°C unless otherwise noted)Peak Power Derating Peak Power Derating 100 120 02 55 07 51 00 1251 50 AMBIENT TEMPERATURE (°C) Percent of Rated Value

Revision: October 19, 2011, 16:35 ©2011 Littelfuse, Inc. Specifications are subject to change without notice. T ransient Voltage Suppression Diodes 143 Axial Leaded – 10kA > AK10 series AK10 Series Please refer to http://www.Littelfuse.com/series/AK10.html for current information. L2 L1 A G D E F CB Part Marking System Dimensions Inches Millimeters A 0.950 24.15 B 0.095 2.4 C - 058C/066C/076C 0.236 6.00 C 0.145 3.68 D 0.570 max. 14.48 max. E 0.050 1 .270 F 0.500 max. 12.70 max. G - 058C/066C/076C 0.200 5.08 G - 170C/190C 0.362 9.2 G - 240C 0.420 10.67 G - 380C/430C 0.650 16.50 L1 0.310 7 .87 L1 - 380C/430C 0.177 4.5 L2= A - (G+L1) tolerance +/- 0.04 inch (1 .0 mm) Dimensions Part Numbering System (Please Refer to Electrical Characteristics Chart) AK10 XXXX Series Type Stand Off Voltage Note: UL mark does not appear on -058C & -066C & -076C. AK10 Series LF AK10-xxxx XX Product Type Littelfuse LogoDate Code