AF216F157501-T TAIYO-YUDEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
notice_e-01 Notice for TAIYO YUDEN productsɹ Please read this notice before using the TAIYO YUDEN products. REMINDERS ˙ Product infor mation in this catalog is as of October 2009. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be - for e practical application or usage of the Products. P lease note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo - ra ting such products, which are caused under the conditions other than those specified in this catalog or individual sp ecification. ˙ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is av ailable. ˙ Please conduct validation and verification of products in actual condition of mounting and operating environment be fore commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for us e in general electronics equipment.(for AV, office automation, household, office supply, information service, te lecommunications, ( such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, di saster prevention, medical, public information network (telephone exchange, base station) etc. which may have di rect influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. D o not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma - ri ne system, military, etc. where higher safety and reliability are especially required. I n addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil - it y evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to in stall a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu - to rs (so called ʠTA IYO YUDENʟs official sales channel ʡ). It is only applicable to the products purchased from any of TAIYO YUDEN ʟ s of ficial sales channel. ˙ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc - cu r in connection with a third party's intellectual property rights and other related rights arising from your usage of pr oducts in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export C ertain items in this catalog may require specific procedures for export according to ʠFo reign Exchange and For - eign Trade Control Law ʡ o f Japan, ʠU.S. Export Administration Regulations ʡ, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. S hould you have any question or inquiry on this matter, please contact our sales staff.
148 chipantenna01_e-01 ■ FEATURES ■ ORDERING CODE ■ EXTERNAL DIMENSIONS/STANDARD QUANTITY ■ PART NUMBERS ■ APPLICATIONS AF 216M Type, AF 816M Type, AF 116M Type AH 104F TypeAH 316M Type AH 104N TypeAH 122F Type AH 083F Type AH 086M Type ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ◦ Compact and Low-profile ◦ Wide bandwidth and High Gain ◦ St able temperature characteristics ◦ Bl uetooth , Wireless LAN, GPS, WiMAX, ZigBee, UWB CHIP ANTENNA ❶Type AH Multilayer Antenna AF H elical Antenna ❸Dimensions (case size) ［mm］ 216 2.5×1.6 816 8.0×1.6 116 11.0×1.6 316 3.2×1.6 083 8.0×3.0 104 10.0×4.0 122 12.0×2.0 086 8.0×6.0 ❹Special Code F Inverted F M Mo no Pole N Mo no Pole ual) ❺Frequency ［MHz］ example 1575 1574.397～1576.443 2450 2400～2500 5550 3100～8000 1. Describe Center Frequency 2. Lower Frequency for Dualband ❻Spec Code 01～ S1～ Applicable to AH104F ❼Packaging ーT Tape & Reel ❷Electrode Code △ With Plating △＝Blank space A F △ 2 1 6 M 2 4 5 0 0 1 － T ❶ ❷ ❸ ❹ ❺ ❻ ❼ E Type L W T E a b c Standard Quantity (pcs) Em bossed Tape AF 2 Unit : mm (inch) Applications Ordering Code External Dimensions (mm) Ce nter Frequency (MHz) GP S AF816M157502 8.0×1.6×1.6 1575 AF116M157502 11.0×1.6×1.6 1575 AH316M157501 3.2×1.6×0.5 1575 W-LAN (2.4GHz) Bl uetooth WiMAX (2.5GHz) ZigBee AF216M245001 2.5×1.6×1.6 2450 AH316M245001 3.2×1.6×0.5 2450 AH083F245001 8.0×3.0×1.0 2450 AH104F2450S1 10.0×4.0×1.0 2450 AH104F2650S1 10.0×4.0×1.0 2650 AH122F245001 12.0×2.0×0.95 2450 W-LAN (2.4GHz／5G Hz) AH104N2450D1 10.0×4.0×1.0 2450/5400 UWB & WiMAX (3.5GHz) AH 086M555001 8.0×6.0×1.0 5550 AH086M555003 8.0×6.0×1.0 5550 REFLOW
HIGH FREQUENCY DIELECTRIC COMPONENT 149chipantenna01_e-01 ■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Typical Characteristics on Taiyo Yuden evaluation board
- AF 216M245001
- AF 8 16M157502 Typical characteristics of VSWR Typical characteristics of radiation pattern （@ 2.45GHz） 440MHz Bandwidth: 180MHz (VSWR: less than 2) 1.325 1.575 1.825 Typical characteristics of VSWR Typical characteristics of radiation pattern （@1.575GHz）
- AH 316M157501
- AH 316M245001 Typical characteristics of VSWR Typical characteristics of VSWR Ty pical characteristics of radiation pattern （@1.575GHz ） Typical characteristics of radiation pattern （@2 .45GHz）
- AH 116M157502 Typical characteristics of VSWR Typical characteristics of radiation pattern （@1.575GHz） Vertical polarization Horizontal polarization XY-Plane ʵY ʵX ʴX ʴY ʴX ʵYʴY Vertical polarization Horizontal polarization ZX-Plane ʴX ʴX ʵZ ʴZ ʴZ ʵZ ʵX ZX-Plane ʴX ʴZ ʵZ ʵX Vertical polarization Horizontal polarization ʴX ʵZ ʴZ Vertical polarization Horizontal polarization XY-Plane ʵY ʴX ʵYʴY ʵX ʴX ʴY 1.325 1.575 1.825 Bandwidth:125MHz ʢVSWR:less than2ʣ Vertical polarization Horizontal polarization ZX-Plane ʴX ʴX ʵZ ʴZ ʴZ ʵZ ʵX Vertical polarization Horizontal polarization ZX-Plane ʴX ʴZ ʵZ ʵX ʴX ʵZ ʴZ Vertical polarization Horizontal polarization XY-Plane ʵY ʴX ʵYʴY ʵX ʴX ʴY Vertical polarization Horizontal polarization XY-Plane ʵY ʵX ʴX ʴY ʴX ʵYʴY Bandwidth: 90MHz (VSWR: less than 2) 1.325 1.575 1.825 Bandwidth: more than 170MHz (VSWR: less than 2) Bandwidth: 190MHz (VSWR: less than 2) 2.0 2.5 3 .0 Vertical polarization Horizontal polarization ZX-Plane ʴX ʴX ʵZ ʴZ ʴZ ʵZ ʵX Vertical polarization Horizontal polarization XY-Plane ʵY ʴX ʵYʴY ʵX ʴX ʴY
150 chipantenna01_e-01 ■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Typical Characteristics on Taiyo Yuden evaluation board
- AH 104F2450S1
- AH 122F245001
- AH 104N2450D1 Typical characteristics of VSWR Typical characteristics of radiation pattern （@ 2.45GHz） Typical characteristics of VSWR Ty pical characteristics of radiation pattern （@2.45GHz ） Typical characteristics of VSWR （2GHz band） Typical characteristics of radiation pattern （@2.45GHz） Typical characteristics of VSWR （5GHz band） Typical characteristics of radiation pattern （@5.25GHz） Vertical polarization Horizontal polarization ZX-Plane ʴX ʴX ʵZ ʴZ ʴZ ʵZ ʵX Vertical polarization Horizontal polarization XY-Plane ʵY ʴX ʵYʴY ʵX ʴX ʴY 150MHz Vertical polarization Horizontal polarization ZX-Plane ʴX ʴX ʵZ ʴZ ʴZ ʵZ ʵX Vertical polarization Horizontal polarization XY-Plane ʵY ʴX ʵYʴY ʵX ʴX ʴY Vertical polarization Horizontal polarization ZX-Plane ʴX ʴX ʵZ ʴZ ʴZ ʵZ ʵX Vertical polarization Horizontal polarization XY-Plane ʵY ʴX ʵYʴY ʵX ʴX ʴY Vertical polarization Horizontal polarization ZX-Plane ʴX ʴX ʵZ ʴZ ʴZ ʵZ ʵX Vertical polarization Horizontal polarization XY-Plane ʵY ʴX ʵYʴY ʵX ʴX ʴY
- AH 083F245001 Typical characteristics of VSWR Typical characteristics of radiation pattern （@2.45GHz ） Vertical polarization Horizontal polarization ZX-Plane ʴX ʴX ʵZ ʴZ ʴZ ʵZ ʵX Vertical polarization Horizontal polarization XY-Plane ʵY ʴX ʵYʴY ʵX ʴX ʴYBandwidth:150MHz 300MHz Bandwidth:1200MHz 4.9 5.4 5.9 Bandwidth:500MHz
HIGH FREQUENCY DIELECTRIC COMPONENT 151chipantenna01_e-01 ■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Typical Characteristics on Taiyo Yuden evaluation board Typical characteristics of VSWR Typical characteristics of VSWR Ty pical characteristics of radiation pattern （@3.96GHz ） Typical characteristics of radiation pattern （@3.96GHz ）
- AH 086M555003
- AH 086M555001 Vertical polarization Horizontal polarization ZX-Plane ʴX ʴX ʵZ ʴZ ʴZ ʵZ ʵX XY-Plane ʵY ʴX ʵYʴY ʵX ʴX ʴY Vertical polarization Horizontal polarization Vertical polarization Horizontal polarization ZX-Plane ʴX ʴX ʵZ ʴZ ʴZ ʵZ ʵX Vertical polarization Horizontal polarization XY-Plane ʵY ʴX ʵYʴY ʵX ʴX ʴY 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10
chipan_reli-PRP1chipan_reli_e-01 ■ PACKAGING ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ◦Embossed Tape ①Mi nimum Qu antity Type Standard Quantity (pcs) Embossed Tape AF 216M, AF816M, AF116M, AH104F, AH 122F, AH104N 20 00 AH316M 3000 AH 083F, AH086M 10 00 ②Tape Material ③Taping Dimensions Type A B W T AF216M AH316M AF 816M AH083F AF 116M, AH104F AH 122F, AH104N AH Unit : mm (inch) ⑤Reel size ⑥Top Tape Strength The top tape requires a peel-off force of 0.1 ～0.7N in the direction of the arrow as illustrated below. ④Leader and Blank Portion Type Chip Cavity Tape Widthness In sertion Pitch Ta pe Thickness MAX. A B C D F K T AF AH104F, AH 104N Unit : mm (inch)
chipan_reli-PRP2 chipan_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1. Operating Temperature Range Specified Value －20～＋80℃ 2. Storage Temperature Range Specified Value －40～＋85℃ 【Test Methods and Remarks 】 ※wi th being taped, ー20～ ＋35℃ 3. Solderability Specified Value At least 90% of Terminal surface immersed is covered by new solder. 【Te st Methods and Remarks 】 S older temperature : 230 ±5℃ D uration : 3±1 s ec. Preconditioning : Preheating at 150 ℃ after immersion into flux. 4. Thermal Shock Specified Value Shall satisfy required VSWR value of individual specifications for each item. 【Te st Methods and Remarks 】 1 h our of recovery after 10 times of 30min.immersion alternately at ー40℃ and 85℃ of temperature,followed by evaluating electrical characteristics. 5. High Temperature Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. 【Te st Methods and Remarks 】 1 h our of recovery under standard condition after 96 hours recovery with 85 ℃ o f temperature, followed by evaluating electrical characteristics. 6. Low Temperature Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. 【Te st Methods and Remarks 】 1 h our of recovery under standard condition after 96 hours recovery with ー40℃ of temperature, followed by evaluating electrical characteristics. 7. Humidity Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. 【Te st Methods and Remarks 】 1 h our of recovery under standard condition after 96 hours recovery with 60 ℃ o f temperature, 90 ～95% relative humidity followed by evaluating electrical characteristics. 8. Resistance to Reflow Specified Value Shall satisfy required VSWR value of individual specifications for each item. 【Te st Methods and Remarks 】 T wo times of reflow soldering by recommended profile attached, followed by evaluating electrical characteristics.
chipan_reli-PRP3 chipan_reli_e-01 ■ PRECAUTIONS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1. PCB Design Precautions ◆Land pattern design P lease do n ot arrange the surface and inside layer pattern near the antenna mounting area. Technical Co nsider- ations ◆Land pattern design L and pattern dimension examples and recommended antenna land pattern Type Dimensions L P a AF216M 2.5 1.5 3 AF816M 8 7 5 AF116M 11 10 3 Unit : mm 2. Soldering Technical Consider- ations ◆Conditions of R eflow soldering (for reference) ・ Pb Free Reflow Profile ・ R eflow Profilev 3. Storage Conditions Precautions ◆Storage conditions . The Products should not be used in the following environments : exposure to special gases such as (C12, NH3, SOx, NOx) exposure to volatile gas or inflammable gas exposure to a lot of dust exposure to water or condensation exposure to direct sanlight or freezing . The Products should be kept in the following conditions : Temperature : ー1 0～＋40℃ ・ Humidity : 15 ～85％R H 3. The products should be used within 6 months after delivery. In case of storage over 6 months, solderability shall be checked before actual usage. Components s h ould be preheated to within 100 to 130 ℃ f rom soldering temperature. ※ Assured to be reflow soldering for 2 times. No te : The above profiles are the maximum allow - ab le soldering condition, therefore these pr ofiles are not always recommended. ■ Please contact our offices for further details of specifications. All of the standard values listed here are subject to change without notice due to technical improvements. T herefore, pl ease check the specifications carefully before use. AF216M/816M/116M AH316M AH104F AH122F AH104N AH086M AH083F