AGRF700 LITTELFUSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
PolySwitch® PTC Devices Overcurrent Protection Device PRODUCT: AGRF700 DOCUMENT: SCD25234 REV LETTER: D REV DATE: JULY 26, 2016 PAGE NO.: 1 OF 2 © 2016 Littelfuse,Inc. littelfuse.com Specifications are subject to change without notice. Revised July 26 , 2016 Specification Status: Released Electrical Rating Voltage: 16V DC MAX Insulating Material: Cured, Flame Retardant Epoxy Polymer Lead Material:
20 AWG Tin Plated Copper
(0.8 mm [0.032] nom. diameter) Part Marking: Manufacturer’s Mark Lot Identification and Part Identification G7 TABLE I. INSTALLATION ENVELOPE DIMENSIONS: A B C D E F G MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX TYP MIN MAX *Rounded off approximation TABLE II. PERFORMANCE RATINGS: CURRENT RATINGS TIME TO TRIP INITIAL RESISTANCE R1 MAX 1 HR. POST TRIP RESISTANCE STANDARD TRIP RA MAX TRIPPED-STATE POWER DISSIPATION AMPS AT 25°C SECONDS AT 25°C, 35 A OHMS AT 25°C OHMS AT 25C OHMS AT 25C WATTS AT 25°C HOLD AT R1 MAX HOLD AT RA MAX TRIP MAX MIN MAX TYP Reference Documents:PS400, PS300 (reference for R1 MAX) Precedence: This specification takes precedence over documents referenced herein. Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid. CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant ELV Compliant Pb-Free Halogen Free* * Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm. HF
PolySwitch® PTC Devices Overcurrent Protection Device PRODUCT: AGRF700 DOCUMENT: SCD25234 REV LETTER: D REV DATE: JULY 26, 2016 PAGE NO.: 2 OF 2 © 2016 Littelfuse,Inc. littelfuse.com Specifications are subject to change without notice. Revised July 26 , 2016 TABLE III. AUTOMOTIVE SPECIFIC STRESS TESTS AND TEST CONDITIONS: ELECTRICAL STRESS TESTS TEST CONDITIONS (see note 2) ESD Voltage Withstand (see note 1) 25kV Short Circuit Fault Current Durability 25 cycles, 16V, 200A Fault Current Durability 350 cycles, 16V/100A End-of-life Mode Verification 1750 cycles, 16V/100A Jump Start Endurance (see note 1) 3 cycles, 26V, 1 minute duration Load Dump Endurance (see note 1) 10 cycles, 86.5V Note 1: The PolySwitch devices are tested in series with a load resistance and the voltages s pecified in the test conditions are shared between the PolySwitch device and the load resistance as specified in PS400. Note 2: Please refer to Appendix A of PS400 for the detailed test procedures Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, military, aerospace, medical , lifesaving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in ap plicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Litte lfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelf use as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse .