AGM6V225A AIMSPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
www.aimscorp.net 6V 225Ah(10hr) AGM6V225AH proof. Usable in any orientation. pressure build-up. The battery is completely sealed, maintenance-free, and leak and oxygen, special one-way valves allow the gases to escape, avoiding excessive immobilized. Should the battery be accidentally overcharged producing hydrogen The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus The AIMS Power AGM maintaince free batteries are lead-acid dioxide technology. 31.4Ah(10hr) Length(mm / inch) 320 / 12.6 Width(mm / inch) 176 / 6.93 Height(mm / inch) 225/ 8.86 Total Height(mm / inch) 230 / 9.06 Approx. Weight(Kg / lbs) 30.5 / 67.2 Nominal Voltage 6V Design Life 10 years Nominal Capacity 77 o F(25 o 10 hour rate (22.5A, 5.4V) 225Ah Internal Resistance Fully Charged battery 77 o F(25 o C) 3.2mOhms Self-Discharge o Operating Temperature Range Discharge -20~60 o C Charge -10~60 o C Storage -20~60 o C Max. Discharge Current 77 o F(25 o C) 1000A(5s) Short Circuit Current 3800A Charge Methods: Constant Voltage Charge 77 o F(25 o Maximum charging current 67.5A Temperature compensation -30mV/ o C Temperature compensation -20mV/ o C page1 of 2 End Point Volts/Cell 5 hour rate (39.2A, 5.25V) 196Ah 1 hour rate (147A, 4.80V) 147Ah 30min 1h 3h 5h 10h 20h 30min 45min 1h 2h 3h 5h 1.60V 1.65V 1.70V 1.75V 1.80V 435 320 273 162 114 80.1 419 315 269 159 113 79.5 405 309 263 155 111 78.9 388 302 258 152 110 78.9 372 296 252 147 108 78.3 End Point Volts/Cell Cycle use 2.40-2.45VPC Standby use 2.20-2.30VPC Weight deviation: ± 3%* Battery Construction Component Positive plate Negative plate Container Cover Safety valve Terminal Separator Electrolyte Raw material Lead dioxide Lead ABS ABS Rubber Copper Fiberglass Sulfuric acid General Features Performance Characteristics No water filling. No electrolyte maintenance. for efficient gas recombination of up to 99%. Absorbent Glass Mat (AGM) technology Not restricted for air transport-complies with IATA/ICAO Special Provision A67. UL recognized component. Can be mounted in any orientation. Computer designed lead, calcium tin alloy grid for high power density. Long service life, float or cyclic applications. Maintenance-free operation. Low self discharge. Number of cells 3 3% of capacity loss per month at 20 C(average) Discharge Constant Current(Amperes at 77° F 25° C) o o Discharge Constant Power (Watts at 77°°° F 25° C) oo All data may be changed without notice. (Note)The above characteristics data are average values obtained within three charge/discharge cycles not the mimimum values. Dimensions and Weight 20 hour rate (11.5A, 5.4V) 230Ah
Storag e time : month s Capacity(%) Capacity(%) Life(year) Number of cyc les(cyc les) Capacity(%) Life(years) o Temperature( C) Capacity (%) Chargin g tim e (hours ) o Ambien t temperature ( C) Testing conditions: floating voltage: 2.27 to 2.30V/Cell ambient temperature: 25℃ (77 O 100 120 4 6 8 2.30V/Cell 10 20 30 40 50 0.2C 1.0C Temperature (℃) -10 -20 100 100 20 0.1C 120 4030 50 100 120 1400 400200 600 1000800 1200 % Depth of discharge 30 1 600 40℃ 30℃ 20℃ 100 110 2 4 6 8 10 12 14 16 18 20 STAND BY USE CYCLE USE 7.8 7.5 7.2 6.9 6.6 (V/6V) -10 0 10 20 30 40 50 60 0.05 0.10 0.15 0 2 6 8 6.0 5.5 6.5 0.20 0.25 140 100 120 Charged Volume (%) 7.0 7.5 Voltage (V) Current (xCA) CHARGE CURRENT CHARGE VOLTAGE 12 14 16 18 20 CHARGED VOLUME Discharge time Battery voltage(V) 22.5A39.2A56.4A 147A225A www.aimscorp.net MH25860 G4M19906-9202-E-16 THE INTERNATIONAL CERTIFICATION NETWORK ISO9001:2008 THE INTERNATIONAL CERTIFICATION NETWORK Discharge characteristic (25 O o Charge characteristic curve Constant voltage charge characteristic (0.25CA,25 C) Relationship between charging voltage and temperature Self-discharge characteristic Life characteristics of standby use Temperature effects on float life Temperature effects on capacity Cycle service life in relation to depth of discharge