DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

SPE-15-8-021/A/WY Page 1 of 13 SPECIFICATION Part No. : AGGBP.25A.07.0060A Description : 25x25mm One Stage GPS-Galileo-Glonass-BeiDou Embedded Active Patch Antenna Module with Front-End SAW Filter Features : Full GPS-Galileo-Glonass-BeiDou Coverage 18dB One-stage LNA Ceramic patch element Front-end SAW filter to reduce out of band noise Wide input voltage 1.8V to 5.5V 25.1 x 25.1 x 7.9mm 60mm Ø1.13 IPEX MHFI (U.FL) Automotive TS16949 Production and Quality Approved Cable length and connector type customizable RoHS compliant

SPE-15-8-021/A/WY Page 2 of 13 1. Introduction The AGGBP.25A is an internal GPS/Galileo/Glonass/BeiDou active patch antenna with Ø1.13 cable and IPEX MHFI (U.FL compatible) connector. It is the ideal antenna for next generation GNSS devices to achieve good sensitivity across all bands in a small form factor. The active patch antenna, by means of a double resonance design, has a wide-band operation over GPS/Galileo/Glonass/BeiDou systems from 1561MHz to 1606 MHz. It includes a one-stage LNA and front-end SAW filter to reduce out of band noise, such as from nearby cellular transceivers. This antenna offers better protection from nearby radiated power surges and greatly reduces the probability o f damaging your GPS/Galileo/GLONASS/BeiDou receiver due to nearby transmissions. The patch, the ground plane, the LNA , and front -end SAW components are all integrated in a dimension of 25.1 x 25.1 x 7.9 mm, connecting with a Ø1.13 60mm long coaxial cable and an IPEX MHFI connector. The AGGBP.25A is manufactured and tested in a TS16949 first tier automotive approved facility . The cable length and connector type can be adjusted for a MOQ. For further optimization to customer specific device environments, custom tuned patch antennas can be supplied, again to a MOQ. For more details please contact your regional Taoglas sales office.

SPE-15-8-021/A/WY Page 3 of 13 2. Specification 2.1. Patch Antenna ELECTRICAL Frequency BEIDOU: 1561.098 ± 2.046MHz. GPS : 1575.42 ± 1.023MHz Galileo : 1575.42 ± 4GHz GLONASS : 1602 ± 5MHz Polarization RHCP Antenna Gain at Zenith (Ceramic Patch only) BEIDOU 1561MHz : -1 dBi typ. @zenith GPS/Galileo 1575.42MHz : -2.5 dBi typ. @zenith GLONASS 1602MHz : -1.5 dBi typ. @zenith Total Antenna Gain at Zenith (Antenna+SAW+LNA+ Cable+Connector) BEIDOU 1561MHz : 17  3dBi GPS/Galileo 1575.42MHz : 15.5  3dBi GLONASS 1602MHz : 16.5  3dBi Impedance 50 ohms Output VSWR Max 2.0 MECHANICAL Ceramic Dimension 25.1 x 25.1 x 4.7mm Total Dimension (including shielding case) 25.1 x 25.1 x 7.9mm Connector IPEX MHFI (U.FL) Cable coaxial cable Ø1.13, length 60mm Weight (g) 11.38 ENVIRONMENTAL Operation Temperature -40°C to 85°C Storage Temperature -40°C to + 85°C Humidity Non-condensing 65°C 95% RH

SPE-15-8-021/A/WY Page 4 of 13 2.2. LNA ELECTRICAL Frequency 1558~1610 MHz. Out of Band Attenuation 0-1534MHz, 13dB Min. 1634MHz-6000MHz, 20dB Min. Output Impedance 50Ω Output VSWR 2.0 Max Pout at 1dB Gain -6 dBm Min. Compression Point -2 dBm Typical LNA Gain, Power Consumption and Noise Figure Voltage LNA Gain(Typ) Power Consumption(mA) Typ Noise Figure (Typ) Min 1.8V 12dB 5mA 3.0dB Typ 3.0V 18dB 10mA 2.8dB Max 5.5V 22dB 23mA 3.0dB

SPE-15-8-021/A/WY Page 5 of 13 3. LNA Gain and Noise Figure @3.0V

SPE-15-8-021/A/WY Page 6 of 13 4. Antenna Return Loss GLONASS BeiDou GPS

SPE-15-8-021/A/WY Page 7 of 13 5. Antenna Radiation Properties 5.1. Test Setup

SPE-15-8-021/A/WY Page 8 of 13 5.2. 2D Radiation Pattern XY Plane XZ Plane

SPE-15-8-021/A/WY Page 9 of 13 YZ Plane 5.3. 3D Radiation Pattern 1561MHz

SPE-15-8-021/A/WY Page 10 of 13 1575.42MHz 1602MHz

SPE-15-8-021/A/WY Page 11 of 13 6. Connector Usage Precautions

SPE-15-8-021/A/WY Page 12 of 13 7. Mechanical Drawing Unit:mm

SPE-15-8-021/A/WY Page 13 of 13 8. Packaging