AFV461 IRF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
/G6ENo Derating for -55°C to +125°C Operation /G6ENo Tantalum Capacitors for High Reliability AFV461 EMI Filter AHV28XX (or Other) DC/DC Converter +Vin +Vin Input Return Input Return +Vout +Vout Output Return Output Return R L R L System Bus AHV28XX (or Other) DC/DC Converter +Vout Output Return +Vin Input Return Case Case Case To other converters up to rated output current The AFV461 EMI filter will reduce the input line re- flected ripple current of all DC/DC converter families to levels below the CEO3 limits of MIL- STD-461. This filter is intended for applications requiring compatibil- ity to MIL-STD-704A. These EMI filters are manufactured in a facility certified to MIL-PRF-38534 and are available with military screening. Four grades are offered with different screen- ing options. Refer to Part Number section. PD - 94586A
2 www.irf.com AFV461 Series Specifications Available Screening Levels and Process Variations for AFV461 Series * Per Commercial Standards Requirement MIL-STD-883 Method No Suffix ES Suffix HB Suffix CH Suffix Temperature Range -20 to +85°C -55°C to +125°C -55°C to +125°C -55°C to +125°C Element Evaluation MIL-PRF-38534 Internal Visual 2017 /GAC Yes Yes Yes Temperature Cycle 1010 Cond B Cond C Cond C Constant Acceleration 2001 500g Cond A Cond A Burn-in 1015 48hrs @ 85 ° C 96hrs @ 125°C 160hrs @ 125°C 160hrs @ 125°C Final Electrical (Group A) +125°C Seal, Fine & Gross 1014 /GAC Cond A, C Cond A, C Cond A, C External Visual 2009 /GAC Yes Yes Yes 1. Typical Applications result in Vout within 2 % of Vin Parameter Condition Min Typ Max Unit Input Voltage Steady State 0 28 40 VDC Input Current DC Ripple 4.0 1.0 Amps Amps RMS Output Voltage Steady State VOUT = VIN - IIN (RDC ) VDC Output Current Steady State 4.0 Amps DC Resistance (RDC ) Steady State 0.07 0.10 0.15 Ohms Power Dissipation Max. DC Current 1.6 Watts Noise Reduction 100 KHz to 50 MHz 40 dB Capacitance Any pin to case 4200 pF Isolation Any pin to case 500VDC 100 M Ω Operating Temperature Storage Temperature Case -55 -65 +125 +150 Weight 39 grams 48hrs
www.irf.com 3 AFV461 Series Device Synchronization Whenever multiple DC/DC converters are utilized in a single system, significant low frequency noise may be generated due to slight difference in the switch- ing frequencies of the converters (beat frequency noise). Because of the low frequency nature of this noise (typically less than 10KHz), it is difficult to filter out and may interfere with proper operation of sen- sitive systems (communications, radar or telemetry). Advanced Analog offers an option, which provides synchronization of multiple AHE/ATW type convert- ers, thus eliminating this type of noise. To take ad- vantage of this capability, the system designer must assign one of the converters as the master. Then, by definition, the remaining converters become slaves and will operate at the masters’ switching frequency. The user should be aware that the synchronization system is fail-safe; that is, the slaves will be continue operating should the master frequency be inter- rupted for any reason. The layout must be such that the synchronization output of the master device is connected to the synchronization input of each slave device. It is advisable to keep this run short to mini- mize the possibility of radiating the 250KHz switch- ing frequency. A typical connection is illustrated on the cover sheet of this document. The appropriate converters must be ordered to take advantage of this feature. After selecting the con- verters required for the system, a ‘MSTR’ suffix is added for the master converter part number and an ‘SL V’ suffix is added for slave part number. See Part Number section of the applicable converter data sheets. AFV461 Block Diagram 11µF 0.2Ω 11µF 0.2Ω 1800 pFd 1800 pFd 10µH 5µH Refer to last page for Pin Designation
4 www.irf.com AFV461 Series Pin Designation Part Numbering WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331 ADVANCED ANALOG: 2270 Martin Av., Santa Clara, California 95050, Tel: (408) 727-0500 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 11/02 Pin No. Designation 1 + Vin 2 + Vout
3 Case
4 Output Return
5 Input Return
Available Standard Miliatary Drawing (SMD) Cross Reference AFV 461 F / CH Model Applicable Military Test Standard Case Style Omit for Standard Screenin g — , ES, HB, CH Standard Military Drawing PIN Vendor CAGE Code Vendor Similar PIN 91020-02HXA 52467 AFV461/CH 91020-02HZA 52467 AFV461F/CH AFV461 Case Outlines
1.120 Max
(28.45) 0.040 D (1.02) X 0.26 L (6.60) Pins 1.600 (40.64) 2.120 Max (53.85) 0.380 Max (9.65) 0.800 (20.32) 2.550 (64.77) 1.110 (28.19) 0.040 D (1.02) X 0.26 L (6.60) Pins 1.600 (40.64) 2.870 (72.90) Max 2.110 (53.59) Max 0.380 (9.65) Max 0.050 (1.27) 0.800 (20.32) Ø 0.162 (4.12)