DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Features
Greater Negative Gate- -Source Voltage Range for Improved Class C Operation Designed for Digital Predistortion Error Correction Systems Optimized for Doherty Applications In Tape and Reel. R3 Suffix = 250 Units, 32 mm Tape Width, 13- -inch Reel. Document Number: AFT20P060- -4N Rev. 0, 1/2013 Freescale Semiconductor Technical Data 1805–2170 MHz, 6.3 W AVG., 28 V AFT20P060- -4NR3 (Top View) RFoutA/VDSA31 Figure 1. Pin Connections
42 RFoutB/VDSB
the source terminal for the transistors. Freescale Semiconductor, Inc., 2013.All rights reserved.
Freescale Semiconductor, Inc. Table 1. Maximum Ratings Table 2. Thermal Characteristics Table 3. ESD Protection Characteristics Table 4. Moisture Sensitivity Level Table 5. Electrical Characteristics(TA =2 5C unless otherwise noted)
- Continuous use at maximum temperature will affect MTTF.
- MTTF calculator available at http://www.freescale.com/rf
Documentation/Application Notes - - AN1955.
- Each side of device measured separately.
GG =2 VGS(Q). Parameter measured on Freescale Test Fixture, due to resistor divider network on the board. Refer to Test Fixture Layout.
Freescale Semiconductor, Inc. Table 5. Electrical Characteristics(TA =2 5C unless otherwise noted)(continued) Channel Bandwidth @5M H zO f f s e t .
- Part internally matched both on input and output.
Freescale Semiconductor, Inc. Figure 2. AFT20P060- -4NR3 Test Circuit Component Layout — 2110- -2170 MHz Table 6. AFT20P060- -4NR3 Test Circuit Component Designations and Values — 2110- -2170 MHz
Freescale Semiconductor, Inc. Figure 3. Single- -Carrier Output Peak- -to- -Average Ratio Compression (PARC) Broadband Performance @ Pout = 6.3 Watts Avg.
3.84 MHz Channel Bandwidth
Figure 4. Intermodulation Distortion Products Figure 5. Output Peak- -to- -Average Ratio
3.84 MHz Channel Bandwidth, Input Signal
Freescale Semiconductor, Inc. Pout, OUTPUT POWER (WATTS) AVG. Figure 6. Single- -Carrier W- -CDMA Power Gain, Drain Figure 7. Broadband Frequency Response
15 GAIN (dB)
2140 MHz
2170 MHz
2110 MHz
2170 MHz D
2140 MHz 2110 MHz
Freescale Semiconductor, Inc. Figure 8. AFT20P060- -4NR3 Test Circuit Component Layout — 1805- -1880 MHz Table 7. AFT20P060- -4NR3 Test Circuit Component Designations and Values — 1805- -1880 MHz
Freescale Semiconductor, Inc. Figure 9. Single- -Carrier Output Peak- -to- -Average Ratio Compression (PARC) Broadband Performance @ Pout = 6.3 Watts Avg. Pout, OUTPUT POWER (WATTS) AVG. Figure 10. Single- -Carrier W- -CDMA Power Gain, Drain Figure 11. Broadband Frequency Response
12 GAIN (dB)
1840 MHz
1805 MHz
1880 MHz
1880 MHzVDD =2 8V d c ,IDQ = 450 mA
Freescale Semiconductor, Inc. PACKAGE DIMENSIONS
Freescale Semiconductor, Inc. AFT20P060- -4NR3
Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc. AFT20P060- -4NR3 PRODUCT DOCUMENTATION, SOFTWARE AND TOOLS Refer to the following documents, software and tools to aid your design process. Application Notes AN1955: Thermal Measurement Methodology of RF Power Amplifiers Engineering Bulletins EB212: Using Data Sheet Impedances for RF LDMOS Devices Software Electromigration MTTF Calculator RF High Power Model .s2p File Development Tools Printed Circuit Boards For Software and Tools, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the Software & Tools tab on the part’s Product Summary page to download the respective tool.
REVISION HISTORY
The following table summarizes revisions to this document. Revision Date Description 0 Jan. 2013 Initial Release of Data Sheet
Freescale Semiconductor, Inc. Information in this document is provided solely to enablesystem and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particularpurpose, nor does Freescale assume any liability arisingout of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/SalesTermsandConditions. Freescale, the Freescale logo, AltiVec, C- -5, CodeTest, CodeWarrior, ColdFire, C- -Ware, Energy Efficient Solutions logo, Kinetis, mobileGT, PowerQUICC, Processor Expert, QorIQ, Qorivva, StarCore, Symphony, and VortiQa are trademarks of ColdFire+, CoreNet, Flexis, MagniV, MXC, Platform in a Package, QorIQ Qonverge, QUICC Engine, Ready Play, SafeAssure, SMARTMOS, TurboLink, Vybrid, and Xtrinsic are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. E 2013 Freescale Semiconductor, Inc. How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support Document Number: AFT20P060- -4N Rev. 0, 1/2013