AFK335M80C12T

AFK226M06B12T CDE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AFK –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C Specifications –55 °C to +105 °C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc 3.3 µF to 6800 µF ±20% @ 120 Hz and +20 °C

0.01 CV or 3 µA @ +20 °C, after two minutes (whichever is greater)

Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Highlights

• +105 °C, Up to 5000 Hour Load Life
• Capacitance Range: 3.3 µF to 6800 µF
• Voltage Range: 6.3 Vdc to 100 Vdc Operating Temperature: Rated Voltage: Capacitance: Capacitance T olerance: Leakage Current: Ripple Current Multiplier: Dissipation Factor: AFK Series Marking Outline Drawing Case Dimensions Add 0.02 per 1000 µF for values greater that 1000 Life Test: 2000 h @ 105 °C, 4.0 — 10.0 mm dia. 5000 h @ 105 °C, 12.5 — 18.0 mm dia. ∆ Capacitance ±30% DF: ≤ 200% of limit DCL: ≤ 100% of limit Shelf Test: 1000 h @ 105 °C ∆ Capacitance ±30% DF: ≤ 200% of limit DCL: ≤ 100% of limit Type AFK Capacitors are the best and by a wide margin. With 40% to 60% lower impedance, 30% to 50% smaller case size and more than twice the life compared to low-ESR type AFC, the Type AFK also excels at cold performance down to –55 °C. In addition, this terrific low- impedance performance, approaching low-ESR tantalum capacitors, is at a significant cost savings compared to tantalum. The vertical cylindrical cases facilitate automatic mounting and reflow soldering into the same footprint of like-rated tantalum capacitors except without the need for voltage derating. Case D ± .05 L A ± 0.2 H I W P K Code (max) (ref) (ref) (mm) 6.3V 10 V 16 V 25 V 35 V 50 V 63 V 80 V 100 V Frequency 50/60 Hz 120 Hz 1 kHz 10 kHz 100 kHz Series FK 220 Capacitance (µF) Voltage Lot No. H L W PD 0.3 mm Max. A I I K j6 . 3 V d c A1 0 V d c C1 6 V d c E2 5 V d c V3 5 V d c H5 0 V d c J6 3 V d c K8 0 V d c 2A 100Vdc

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AFK –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C Ratings Table Cap (µF) Catalog Part Number Max. DCL 2 min (µA) Max. Dissipation Factor @120 Hz/20 °C Max. ESR @100 kHz/20 °C (Ω ) Impedance @ 100 kHz/20 °C (Ω) Max. Ripple Current @ 100 kHz/105 °C (mA) Case Code Size D x L (mm) Quantity per Reel

6.3 Vdc ( 8 Vdc Surge )

10 Vdc ( 13 Vdc Surge )

16 Vdc ( 20 Vdc Surge )

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AFK –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C Cap (µF) Catalog Part Number Max. DCL 2 min (µA) Max. Dissipation Factor @120 Hz/20 °C Max. ESR @100 kHz/20 °C (Ω ) Impedance @ 100 kHz/20 °C (Ω) Max. Ripple Current @ 100 kHz/105 °C (mA) Case Code Size D x L (mm) Quantity per Reel

25 Vdc ( 31 Vdc Surge )

35 Vdc ( 44 Vdc Surge )

50 Vdc ( 63 Vdc Surge )

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AFK –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C Cap (µF) Catalog Part Number Max. DCL 2 min (µA) Max. Dissipation Factor @120 Hz/20 °C Max. ESR @100 kHz/20 °C (Ω ) Impedance @ 100 kHz/20 °C (Ω) Max. Ripple Current @ 100 kHz/105 °C (mA) Case Code Size D x L (mm) Quantity per Reel

63 Vdc ( 75 Vdc Surge )

80 Vdc ( 100 Vdc Surge )

100 Vdc ( 125 Vdc Surge )

M 16 B 12T –F Type AFK –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C Part Numbering System Type Capacitance Capacitance 108 = 1000.0 µF Typical Performance Curves Ratio to 25° C, 120 Hz Value Voltage Code Case Packaging Code RoHS 105 = 1.0 µF Tolerance 06 = 6.3 Vdc 35 = 35 Vdc Code 12 = Carrier tape Compliant 106 = 10.0 µF M = ±20% 10 = 10 Vdc 50 = 50 Vdc Width (mm) 107 = 100.0 µF 16 = 16 Vdc 63 = 63 Vdc T = Tape & Reel 25 = 25 Vdc 80 = 90 Vdc B = Bulk 2A = 100 Vdc Capacitance vs. Temperature and Frequency 3300µF/6.3Vdc (12.5 x 13.5 mm) 0.2 0.4 0.6 0.8 1.2 1.4 Ratio to 25°C, 120 Hz Value 65°C 25°C 85°C 0°C –40°C 45°C –20°C 105 –55°C 10 100 1,000 10,000 100,000 1,000,000 Capacitance vs. Temperature & Frequency 100 µF @ 16 Vdc (6.3 X 5.8 mm)1.2 65°C 25°C 85°C 0°C 105 °C –40°C 45° –20°C –55°C 0.8 0.6 0.4 0.2 10 100 1,000 10,000 100,000 1,000,000 Frequency (Hz)

Type AFK –55 °C to 105 °C Typical Performance Curves SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C C, 120 Hz ValueRatio to 25Ratio to 25°C, 120 Hz Value 100

0.1 Capacitance Change (%)

ESR vs. Temperature and Frequency D.F. (@ 120 Hz) Ratio to 25 C, 120 Hz Value Ratio to 25 C, 120 Hz Value 100 0.1 ESR vs. Temperature and Frequency 100 –40°C –20°C 0°C 25°C 45°C 85°C 65°C 105 ° –55°C –40 °C –20 °C 0°C 25°C 45°C 85°C 65°C 105 °C –55°C 0.1 10 100 1,000 10,000 100,000 1,000,000 Frequency (Hz) 10 100 1,000 10,000 100,000 1,000,000 Frequency (Hz) Impedance vs Temperature and Frequency 3300 µF /6.3 V (12.5 x13.5mm) Impedance vs. Temperature and Frequency 100 µF @ 16 Vdc (6.3 X 5.8 mm) –40°C 0°C 25°C 65°C85°C 45°C –20°C 105°C –55°C –40°C 0°C 25°C 65°C 85°C 45°C –20°C 105 °C –55°C 0.1 0.01 0.001 10 100 1,000 10,000 100,000 1,000,000 10 100 1000 10000 100000 1000000 Frequency (Hz) Dissipation Factor vs.Frequency (Hz) Capacitance Change vs. Time Temperature(AFK Series Typical Performance) 3 -10 -20 0.01 22 µF @ 6.3 Vdc (4 x 5.4 mm) 100 µF @ 6.3 Vdc ( 6.3 x 5.4 mm) 1500 µF @ 6.3 Vdc (10 x 10.2 mm) 0 500 1000 1500 2000 2500 3000 3500 -60 -10 40 90 140 47 µF @ 6.3 Vdc (4 X 5.8 mm) 100 µF @ 6.3 Vdc (6.3 X 5.8 mm) 1000 µF @ 6.3 Vdc (8 X 10.2 mm) Time (Hours) Temperature (°C) -15