AFII-LC-0083 ABRACON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
REVISED: 10-20-25 SMD 2450MHz Low Pass Ceramic Filter AFII-LC-0083 1.0 x 0.5 x 0.38 mm RoHS Compliant MSL Level = 1 Request Samples Check Inventory
12117 Bee Caves Rd, Bldg-3, Suite 200 Bee
Cave, TX 78738 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com
Description
Setting a new industry benchmark for miniaturization and performance, this advanced harmonic rejection filter is housed in an ultra -compact 1.0 x 0.5 x 0.38 mm package. It achieves an exceptional blend of ultra -low 0.38 dB insertion loss and outstanding out-of-band rejection exceeding 47 dB at the 2nd and 3rd harmonics. Designed for 50-ohm systems, it is ideally positioned between PAs and antennas to dramatically suppress harmonics and improve spectral purity. Its MSL Level 1 rating ensures superior manufacturability for high -volume IoT, Bluetooth ® , and 2.4GHz home automation devices, enabling cleaner signals and extended battery life. Features Applications
- 1.0 x 0.5 x 0.38 mm in Size
- Low Insertion Loss: 0.38 dB
- Out-of-Band Rejection: > 47 dB (at 2nd & 3rd harmonics)
- 50 Ohms Single-Ended Input & Output
- RoHS Compliant | MSL Level 1
- IoT, Wi-Fi, V2X, Wearables, ISM
- Bluetooth® / ZigBee® / Thread / Matter
- Suppress Harmonics and Improve Spectral Purity Between Power Amplifiers and Antennas
- Antenna Matching and Filtering in 2.4GHz Audio and Home Automation Applications
Ordering Information
AFII-LC-0083 SMD 2450MHz Low Pass Ceramic Filter on Cut Tape AFII-LC-0083-T SMD 2450MHz Low Pass Ceramic Filter on Tape & Reel AFII-LC-0083-EVB SMD 2450MHz Low Pass Ceramic Filter Evaluation Board Note: Other options not listed may be available upon request via Abracon online support
REVISED: 10-20-25 SMD 2450MHz Low Pass Ceramic Filter AFII-LC-0083 1.0 x 0.5 x 0.38 mm RoHS Compliant MSL Level = 1 Request Samples Check Inventory Cave, TX 78738 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Electrical Specification Notes: (1) Typical values are the average values within the corresponding frequency band. (2) A matching network is unnecessary (refer to the Measurement Circuits section) . Mechanical Specification Environmental Specification Parameters Minimum Typical Maximum Units Notes Center Frequency (f0) - 2450 - MHz - Passband 2400 - 2500 MHz - Insertion Loss (1) - 0.38 0.4 dB - VSWR - - 1.06 - - Relative Attenuation (1) (Reference level: 0dB) 41 47 - dB 2nd harmonics 4900MHz (4800 - 5000 MHz) 53 55 - 3rd harmonics 7350MHz (7200 - 7500 MHz) Amplitude Ripple (1) - 0.01 - dB Group Delay (1) - 0.16 0.17 ns Group Delay Ripple (1) - 0.002 0.004 Source Impedance (2) (single ended) - 50 - Ω - Load Impedance (2) (single ended) - 50 - Ω - Power Capacity 2 W Parameters Specifications Dimension 1.0 x 0.5 x 0.38 mm Mounting Type Surface Mount Parameters Specifications Operating Temperature Range -40º C ~ +85ºC Storage Temperature Range -10º C ~ +40ºC MSL level 1 RoHS Complaint Yes
REVISED: 10-20-25 SMD 2450MHz Low Pass Ceramic Filter AFII-LC-0083 1.0 x 0.5 x 0.38 mm RoHS Compliant MSL Level = 1 Request Samples Check Inventory Cave, TX 78738 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Product Dimensions Unit: mm
REVISED: 10-20-25 SMD 2450MHz Low Pass Ceramic Filter AFII-LC-0083 1.0 x 0.5 x 0.38 mm RoHS Compliant MSL Level = 1 Request Samples Check Inventory Cave, TX 78738 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Recommended Land Pattern Unit: mm Please note: The line width should be designed to achieve a 50-ohm characteristic impedance, depending on the PCB material and thickness. For technical assistance, please contact Abracon online support through our online support platform.
REVISED: 10-20-25 SMD 2450MHz Low Pass Ceramic Filter AFII-LC-0083 1.0 x 0.5 x 0.38 mm RoHS Compliant MSL Level = 1 Request Samples Check Inventory Cave, TX 78738 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Measurement Circuit Port Matching Component Input R1: 50Ω Output R2: 50Ω
REVISED: 10-20-25 SMD 2450MHz Low Pass Ceramic Filter AFII-LC-0083 1.0 x 0.5 x 0.38 mm RoHS Compliant MSL Level = 1 Request Samples Check Inventory Cave, TX 78738 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Frequency Characteristics Group Delay
REVISED: 10-20-25 SMD 2450MHz Low Pass Ceramic Filter AFII-LC-0083 1.0 x 0.5 x 0.38 mm RoHS Compliant MSL Level = 1 Request Samples Check Inventory Cave, TX 78738 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Reflow Profile [JEDEC J-STD-020] Solder paste: Sn/3.0Ag/0.5Cu Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly Preheat / soak Temperature minimum (Tsmin) 100℃ 150℃ Temperature maximum (Tsmax) 150℃ 200℃ Time (Tsmin to Tsmax) (ts) 60 – 120 sec. 60 – 90 sec. Average ramp-up rate (Tsmax to Tp) 3℃/sec. max 3℃/sec. max Liquidous temperature (TL) 183℃ 217℃ Time at Liquidous (TL) 60 – 150 sec. 60 – 150 sec. Peak package body temperature (Tp)* See Table 1 See Table 2 Time (Tp)** within 5℃ of the specified classification temperature (Tc) 20 sec. 10 sec. Ramp-down rate (Tp to Tsmax) 6℃/sec. max 6℃/sec. max Time 25℃ to peak temperature 6 min. max 8 min. max Reflow cycles 2 max 2 max *Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. **Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. Table 1 SnPb Eutectic Process Classification Temperatures (Tc) Package Thickness Volume mm3 <350 Volume mm3 ≧350 <2.5mm 235℃ 220℃ ≧2.5mm 220℃ 220℃ Table 2 Pb-Free Process Classification Temperatures (Tc) Package Thickness Volume mm3 <350 Volume mm3 350-2000 Volume mm3 >2000 <1.6mm 260℃ 260℃ 260℃ 1.6mm - 2.5mm 260℃ 250℃ 245℃ >2.5mm 250℃ 245℃ 245℃
REVISED: 10-20-25 SMD 2450MHz Low Pass Ceramic Filter AFII-LC-0083 1.0 x 0.5 x 0.38 mm RoHS Compliant MSL Level = 1 Request Samples Check Inventory Cave, TX 78738 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Packaging Tape & Reel Dimension Carrier Tape Specifications (mm) E1 D0 P0 P2 F P1 W A0 B0 K0 Reel Qty Reel Specifications (mm) A W1 N C ATTENTION: Abracon LLC’s products are Commercial-Off-The-Shelf (‘COTS’), which are designed, intended, and validated for use in commercial, industrial, and automotive applications. The customer is responsible for testing and verifying the performance of an Abracon so lution to meet their system-level requirements.