DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
50 all RF ports TX, RX, BT and ANT ports DC blocked Passband 2.4 – 2.5 GHz 2.6 dB Max Insertion Loss (TX Path) 35 dB Rejection in 2110 - 2170 MHz >40 dB TX Path Rejection at 2 nd and 3 rd Harmonic Bands Minimum 29 dB TX - RX Port Isolation 2.75 V Minimum Control Voltage for WLAN TX & RX Mode 2.45 V Minimum Control Voltage for BT Mode <20 A Control Pin Current -18 dB TX Directional Coupling -30° C to +85° C operation Component Image Note: Package marking provides Orientation and identifi cation 1st row “2P” = Product Code 1st row “ WW” = Work Week of manufacture 2nd row “XXXX” = Lot Number 456 10 11 12 SW1 2 TX 1 RX 3
8 Gnd
9 Gnd
7 Ant
11 CPL
12 SW2
10 Gnd
Table 1. Absolute Maximum and Minimum Ratings Table 2. Recommended Operating Range Table 3. RF Electrical Characteristics
Table 3. RF Electrical Characteristics (cont.) Table 4. Truth Table dates and general availability of the product at any time.
Figure 12. Typical Group Delay vs Frequency Response (TX Path) Figure 13. Typical Pout vs Pin Curve – P1dB = 31 dBm (TX Path) control signals SW0, SW1 & SW2. All Bottom Pins are connected to GND.
1 GND
3 SW2
5 SW1
7 SW0
2412 MHz
2442 MHz
2484 MHz
Note: No external SMTs required.
2 SW1
4 SW0
6 GND
Package Dimensions and Pin Descriptions 2.20 ±0.075 2.20 ±0.075 1012 Pin 1 Mark 0.55 ±0.10 0.40 typical 456 101112 131.002.20 1.00 2.20 0.09 0.30 0.30 0.45 0.20 0.225 0.225 Top View Through Package Top View Si de View Pin Description Pin # Name Description
1 TX RF Transmit
2 SW1 Control Voltage
3 RX RF Receive
4 SW0 Control Voltage
5 BT RF Bluetooth
6 GND Ground
7 ANT RF Antenna
8 GND Ground
9 GND Ground
10 GND Ground
11 CPL RF TX Coupled
12 SW2 Control Voltage
13 GND Ground
rejection. 0.20 Package Outline 1.00 1.00 0.30 SQ 0.19 Solder Mask 2.30 SQ 0.15 min soldermask web all around Stencil 0.19 1.00 1.00 0.30 0.30 SQ 0.50 SQ 1112 546
Refl ow Profi le Recommendations Typical SMT Refl ow Profi le for Maximum Temperature = 260 +0/-5° C Typical SMT Refl ow Profi le for Maximum Temperature = 260 +0/-5° C Profi le Feature Sn-Pb Solder Pb-Free Solder Average ramp-up rate (TL to TP) 3°C/sec max 3°C/sec max Preheat – Temperature Min (Tsmin) – Temperature Max (Tsmax) – Time (min to max) (ts) 100° C 150° C 60-120 sec 150° C 200° C 60-120 sec Tsmax to TL – Ramp-up Rate 3°C/sec max Time maintained above: – Temperature (TL) – Time (TL) 183° C 60-150 sec 217° C 60-150 sec Peak temperature (Tp) 240 +0/-5° C 260 +0/-5° C Time within 5° C of actual Peak Temperature (tp) 10-30 sec 20-40 sec Ramp-down Rate 6°C/sec max 6°C/sec max Time 25° C to Peak Temperature 6 min max. 8 min max. Time Temperature Tp TL tp tL t 25° C to Peak Ramp-up ts Tsmin Ramp-down Preheat Critical Zone TL to Tp Tsmax
Device Orientation & Pin 1 Location In Tape USER FEED DIRECTION TOP VIEW END VIEW USER FEED DIRECTION COVER TAPE CARRIER TAPE REEL 2FWW XXXX 2FWW XXXX 2FWW XXXX Tape Dimensions 4.00 ±0.10 4.00 ±0.10 8.00 +0.30 0.10 2.40 ±0.05 0.80 ±0.05 Ø 1.00 ±0.25 2.00 ±0.05 3.50 ±0.05 1.75 ±0.10 Ø 1.50 ±0.10 B.K.A. 2.38 ±0.05 5° MAX 5° MAX
Ø178.0±1.0 Ø55.0±0.5 SEE DETAIL "X" 65° 45° 60° EMBOSSED RIBS RAISED: 0.25mm, WIDTH: 1.25mm 14.4* MAX. Ø51.2±0.3 Slot hole ‘a’ RECYCLE LOGO FRONT VIEW -0.0 +1.5*8.4 FRONT BACK FRONT BACK Ø178.0±1.0 7.9 - 10.9* Slot hole ‘b’ BACK VIEW R5.2 R10.65
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. AV02-2882EN - February 27, 2012 AFEM-S102 Part Number Ordering Information Part Number Devices Per Container Container AFEM-S102-BLKG 100 Antistatic bag AFEM-S102-TR1G 3000 7” Reel