AFC CDE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Type AFC –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Low Impedance, 105 °C CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Specifications –55 °C to +105 °C 6.3, 10, 16, 25 & 50 Vdc 1.0 µF to 1500 µF ±20% @ 120 Hz and +20 °C

0.01 CV or 3 µA @ +20 °C, after two minutes (whichever is greater)

Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Type AFC Capacitors are the choice for high-frequency filtering. At 100 kHz, most ratings can handle more than twice the ripple current of type AHA. With solid performance at temperatures down to –55 ° C, Type AFC has more than 90% capacitance retention at –20 ° C and 1 kHz. With low impedance to beyond 100 kHz, it is ideal for higher power DC/DC converters. The vertical cylindrical cases make for easy automatic mounting and reflow soldering, and offer big savings and higher capacitance compared to tantalum capacitors. Highlights

  • +105 °C, Up to 1000 Hour Load Life
  • Capacitance Range: 1 µF to 1500 µF
  • Voltage Range: 6.3 Vdc to 50 Vdc Operating Temperature: Rated Voltage: Capacitance: Capacitance Tolerance: Leakage Current: Dissipation Factor: Ripple Current Multiplier: AFC Series Marking Outline Drawing Case Dimensions Load Life: 1000 h @ +105 °C ∆ Capacitance ±20% DF: ≤200% of limit DCL: ≤100% of limit Shelf Life: 1000 h @ +105 °C ∆ Capacitance ±20% DF: ≤200% of limit DCL: ≤100% of limit Case Dimensions in (mm) Code D ± 0.5 L A ± 0.2 H (max) I (ref) W P (ref) K 50/60 Hz 120 Hz 1 kHz 10 kHz 100 kHz

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type AFC –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Low Impedance, 105 °C Ratings Table Part Numbering System Max. Max. ESR @

120 Hz20 °C

Max. Ripple Current @ 105 °C 100 kHz (mA) Max. Dissipation Impedance @ 100 kHz 20 °C Cap Catalog Part DCL Factor @ Case Size (mm) Quantity (µF) Number 2 min 120 Hz Code D x L per Reel (mA) 20 °C (Ω) (Ω)

6.3 Vdc (8 Vdc Surge)

10 Vdc (13 Vdc Surge)

16 Vdc (20 Vdc Surge)

25 Vdc (31 Vdc Surge)

35 Vdc (44 Vdc Surge)

50 Vdc (63 Vdc Surge)

Type Capacitance Capacitance Voltage Case Packaging 105 = 1.0 µF Tolerance 06 = 6.3 Vdc 25 = 25 Vdc Code Information 106 = 10.0 µF M = ±20% 10 = 10 Vdc 35 = 35 Vdc 12 = Carrier tape 107 = 100.0 µF 16 = 16 Vdc 50 = 50 Vdc Width (mm) 108 = 1000 µF T = Tape & Reel B = bulk RoHS Compliant

Type AFC –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Low Impedance, 105 °C CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Typical Performance Curves AFC 106 M 16 B 12T I I I I I I Type Capacitance Capacitance Voltage Case Packaging 105 = 1.0 µF Tolerance 06 = 6.3 Vdc 25 = 25 Vdc Code Information 106 = 10.0 µF M = ±20% 10 = 10 Vdc 35 = 35 Vdc 12 = Carrier tape 107 = 100.0 µF 16 = 16 Vdc 50 = 50 Vdc Width (mm) 108 = 1000 µF T = Tape & Reel B = bulk

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type AFC –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Low Impedance, 105 °C Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.