AFC-E1_SERIES ARCH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

VER : B_5 update : 2010.07.09 AC-DC Power Module AFC-E1 SERIES 10 Watts ELECTRICAL SPECIFICATIONS Model No. AFC-3.3S-E1 AFC-5S-E1 AFC-12S-E1 AFC-15S-E1 AFC-24S-E1 Max Output Wattage (W) 10W 10W 10W 10W 10W Voltage 90-264 VAC Frequency (Hz) 47-440 Hz Current (Full load) 220 mA max. (115 VAC) / 150 mA max. (230 VAC) Inrush Current (<2ms) 23 A max. (115 VAC) / 46 A max. (230 VAC) Input Leakage Current 0.25 mA max. Voltage (V.DC.) 3.3V 5V 12V 15V 24V Voltage Accuracy ±2% Current (mA) max 2500 2000 833 667 417 Line Regulation (LL-HL) (typ.) ±0.3%. Load Regulation (5-100%) (typ.) ±0.5%. Minimum Load 0% Maximum Capacitive Load 75000 uF 40000 uF 8500 uF 3500 uF 1200 uF Ripple <0.2% Vout +40mV max (Vp-p) Noise <0.5% Vout +50mV max (Vp-p) Efficiency 74% 79% 82% 78% 80% Hold-up Time 15 ms min. Output Switching Frequency 125 kHz Over Power Protection Hiccup technique, auto-recovery Over Voltage Protection Zener diode clamp Protection Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Isolation Input-Output (V.AC) 3000V Operating Temperature -40°C…+70°C (with derating) Storage Temperature -40°C…+85°C Temperature Coefficient ±0.02%/°C Humidity 20-85% RH Environment MTBF >330,000 h @ 25°C (MIL-HDBK-217F) Case Material Plastic resin with Fiberglass (flammability to UL 94V-0) Weight 54 g Physical Cooling Method Free air convection Vibration 10-55 Hz 0.5 mm width/ 1 minute cycle Genera Shock 20 G (3 directions each 3 times.) Safety Agency Approvals UL/cUL, CE, CB EMI (Conducted & Radiated Emission) EN 55022 class B EMC EMS (Noise Immunity) EN 55024 KEY FEATURES „ Switching Power Module for PCB Mountable „ Fully Encapsulated Plastic Case „ Universal Input Range 90-264VAC, 47-440 Hz „ Regulated Output and Low Ripple and Low Noise „ Isolation Class II „ Small Size: 2.06 x 1.07 x 0.93 Inches „ Screw Terminal For Optional „ CE, CB, UL Approval „ 2-Years Product Warranty 1.All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. 2.Ripple & Noise are measured at 20MHz of bandwidth with 0.1UF & 47UF parallel capacitor.

VER : B_5 update : 2010.07.09 AC-DC Power Module AFC-E1 SERIES 10 Watts MECHANICAL DIMENSION ( Top View ) DERATING BLOCK DIAGRAM PIN# SINGLE

1 AC IN (N)

2 AC IN (L)

Maximum Torque １２｛１.２１｝ ( ｋｇｆ.ｃｍ｛Ｎ.ｍ｝)

VER : B_5 update : 2010.07.09 AC-DC Power Module AFC-E1 SERIES 10 Watts SCREW TERMINAL AFC- E1-A2 PIN# Single

1 NO CONNECT

2 AC IN (N)

3 AC IN (L)

  1. NO CONNECT 5 +DC OUT 6 -DC OUT

7 NO CONNECT

8 NO CONNECT

PIN# Single

1 AC IN

2 NO CONNECT

  1. -DC OUT

5 NO CONNECT

6 NO CONNECT

VER : B_5 update : 2010.07.09 AC-DC Power Module AFC-E1 SERIES 10 Watts AFC E1-A4 PIN# Single

  1. -DC OUT

PIN# Single

  1. NO CONNECT 5 +DC OUT 6 -DC OUT

VER : B_5 update : 2010.07.09 AC-DC Power Module AFC-E1 SERIES 10 Watts AFC E1-A6 PIN# Single

  1. -DC OUT

PIN# Single

  1. -DC OUT